PANDUIT FS178A Formed Tee Fitting Installation Guide
- June 13, 2024
- PANDUIT
Table of Contents
PANDUIT FS178A Formed Tee Fitting
Product Instructions
- Cut away both sides of the wire basket.
- Leave at least one cross-wire spacing.
- Cut the sidewall away up to the line wire.
- Leave at least one cross-wire spacing.
- Assemble one radius support bracket to the baskets. Keep supplied fasteners loose.
- Assemble another radius support bracket to the other side of the basket. Keep supplied fasteners loose.
- Hang the basket and assemble it to customer-supplied threaded rods. Ensure all trapeze brackets are within 2 feet from the intersection.
- Add one connection plate to cover the gap between the baskets. Loosely attach with supplied fasteners.
- Tighten all fasteners.
- Place two protective sheets along the radius of the corner. Attach with push-in fasteners and cable ties if desired.
- The assembly is complete.
For Technical Support
- Website: www.panduit.com/resources/install_maintain.asp.
- E-mail: techsupport@panduit.com.
- Phone: 866-405-6654
INSTALLATION INSTRUCTIONS
TEE-INTERSECTION BRACKETS
PANDUIT WIRE BASKET TEE-INTERSECTION BRACKETS
- Part Numbers: PWBPF2X4, PWBPF2X6, PWBPF2X8, PWBPF2X12, PWBPF2X18**,
- PWBPF2X24, PWBPF4X4, PWBPF4X6, PWBPF4X8, PWBPF4X12, PWBPF4X18,
- PWBPF4X24, PWBPF6X6, PWBPF6X8, PWBPF6X12, PWBPF6X18, PWBPF6X24
CONTACT
- For Technical Support: www.panduit.com/resources/install_maintain.asp.
- For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp.
- E-mail: techsupport@panduit.com.
- Phone: 866-405-6654
- www.panduit.com.
- FS178A
©Panduit Corp. 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>