WYNDHAM COLLECTION WC-2929-60-SGL 60 Inch Single Vanity Instruction Manual
- June 13, 2024
- WYNDHAM COLLECTION
Table of Contents
- WYNDHAM COLLECTION WC-2929-60-SGL 60 Inch Single Vanity
- Product Information
- Product Usage Instructions
- OVERVIEW
- Installation
- PACKING LIST
- HOW TO ADJUST HINGES (if required)
- REQUIRED TOOLS NOT IN BOX
- INSTALLATION INSTRUCTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WYNDHAM COLLECTION WC-2929-60-SGL 60 Inch Single Vanity
Product Information
This product is a vanity cabinet with a counter, sink, and mirror. It is designed to be installed on a level surface and requires professional installation. The package includes the main cabinet, counter & sink (may not be included), and a mirror (may not be included). Some additional components may be required for installation, such as screws for the mirror. Prior to installation, it is important to check all received items against the packing list and report any missing items to the retailer immediately. To ensure the longevity of the product, it is recommended to protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight, and chemical hazards.
Product Usage Instructions
- Locate the box inside the vanity that contains the handles. Unpack the handles and install them on the vanity. Avoid over-tightening when attaching.
- Draw a horizontal line on the wall to mark the screw position for installing the mirror.
- Using a drill, create holes in the marked positions and insert plastic wall anchors.
- Install the screws into the wall anchors, leaving enough of the screw exposed to hang the mirror (approximately 1/4 – 1/2 inch).
- If required, adjust the hinges for door and drawer alignment. Refer to the provided instructions for adjusting hinges.
- If required, adjust the drawer slides. Refer to the provided instructions for adjusting drawer slides.
Note: The installation guide provides a QR code that can be scanned with a phone to access detailed video instructions or visit www.wyndhamcollection.com/3dslides. For proper sealing, install the counter by applying clear silicone sealant around the top of the cabinet. Avoid over-applying the sealant and allow it to dry for 24 hours for proper curing. It is important to have the necessary tools for installation including a spirit level, Phillips screwdriver, tape measure,\ pencil, and electric drill. Silicone sealant is also required.
OVERVIEW
Installation
- Prior to installation please check received items against the “Packing List”.
- Please report any missing items to your retailer immediately.
- Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight, and chemical hazards.
- Professional installation is recommended.
- Please install it on a level surface. If minor door and drawer alignment is required, please follow the easy directions below.
- The backsplash comes in two pieces.
PACKING LIST
(Not all components may be included, depending upon your purchase)
HOW TO ADJUST HINGES (if required)
REQUIRED TOOLS NOT IN BOX
INSTALLATION INSTRUCTIONS
HOW TO ADJUST DRAWER SLIDES (if required)
Scan the QR code with your phone to watch detailed video instructions or visit www.wyndhamcollection.com/3dslides.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>