GENERATION LIGHTING 8226701 Light Antique Bronze Outdoor Post Instruction Manual
- June 13, 2024
- GENERATION LIGHTING
Table of Contents
GENERATION LIGHTING 8226701 Light Antique Bronze Outdoor Post
Product Information
The Alcona Post is an outdoor lighting fixture designed for wet locations. It is safety-listed and can be installed in accordance with the applicable installation code.
- Product Model: ALCONA_OD_POST
- Product Number: 8226701 1.0
- Manufacturer: Generation Lighting
- Manufacturer Address: 7400 Linder Ave., Skokie, IL 60077
- Contact Information: T 847.410.4400 | F 847.410.4500 | www.generationlighting.com
Installation Instructions
CAUTION – RISK OF FIRE:
This product must be installed by a person familiar with the construction and
operation of the product and the hazards involved. Follow the applicable
installation code.
IMPORTANT: Save these instructions for future reference.
Installation Steps:
- Start by assembling the post. Use the provided post screws (2) to attach the post (2) securely.
- Attach the socket (5) to the post (2) using the socket screws.
- Connect the lamp (4) to the socket (5).
- Attach the shade (6) to the socket (5) by aligning the holes and securing it with the shade screws.
- Place the cover (7) over the shade (6) and secure it with the cover screw (1A).
Note:
This installation guide provides a general overview. For more detailed
instructions, refer to the complete user manual.
GENERAL PRODUCT INFORMATION
- This product is safety-listed for wet locations.
- This instruction shows a typical installation.
Installation Instruction
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Secure the fixture to the post with post screws.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Place the shade into the fixture.
- Align the holes on the top cover to holes in the fixture, place the cover over the shade, and secure it in place with the cover screws.
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
Contact Information
- 7400 Linder Ave., Skokie, IL 60077
- T 847.410.4400
- F 847.410.4500
- www.generationlighting.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>