GENERATION LIGHTING 990C7848402-FND Founders Flush Mount Instruction Manual
- June 13, 2024
- GENERATION LIGHTING
Table of Contents
990C7848402-FND
Installation Instructions for
Founders Flush Mount
7848402 1.1
CEILING
SAVE THESE INSTRUCTIONS!
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co.
Visual Comfort & Co. reserves the right to change specifications for product
improvements without notification.
Install the Fixture
- JUNCTION BOX
- MOUNTING BAR
- FIXTURE BASE
- CAP NUT
- LAMP
- FRAME
- GLASS PANEL
- TAB
- STATIONARY TAB
[1] Install the glass one panel at a time into the frame by first
inserting it into the bottom stationary tab, position the panel in place, then
bend the top tab to secure the panels in place.
[2] Secure the mounting plate to the junction box.
[3] Connect the fixture to a suitable ground in accordance to local
electrical codes.
[4] Connect the white fixture wire (square and/or rigid) to the neutral
power line wire with a wire nut.
[5] Connect the black fixture wire (round and/or smooth) to the hot power
line wire with a wire nut.
[6] Neatly place all the wires into the junction box, place the fixture
base onto the mounting plate, and secure it in place with cap nuts.
[7] Screw the lamp into the socket. Refer to the label on the socket for
Max Wattage Information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>