EZTRUNK 1918 0092 Aluminum Tube Doors Instruction Manual

: June 13, 2024
: EZTRUNK

Table of Contents

1918 0092 #1918 0094**

**RAZOR JL- JLU- JT Aluminum Tube Doors
EZTRUNK ASSEMBLY
MANUAL

1918 0092 #1918 0094**

1918 0092 Aluminum Tube Doors

MAKE IT E-Z
Print the latest manual & Watch the EZTRUNK Video

https://qrco.de/bc9cp3
Scan QR CODE for Video &
PDF MANUALS

Customer Service
Any question? WE ARE HERE TO HELP!
Text or Call 203-901-0055 / Call 203-591-9060
EMAIL US: SERVICE@EZTRUNK.NET
7 days a week 8:30 am EST
WE CAN HELP YOU!
PO# :……………………..

Please read instructions fully before beginning assembly

NO| Illustration| Description| Part#| 2Dr QTY. #1918 0092| 4Dr QTY #1918 0094
---|---|---|---|---|---
1| | Driver / Left Front Door| 1918009FD| 1| 1
2| | Passenger / Right Front Door| 1918009FP| 1| 1
3| | Driver / Left Rear Door| 1918009RD| | 1
4| | Passenger / Right Rear Door| 1918009RP| | 1
5| | Driver Side Front Door Latch| 8009DFL| 1| 1
6| | Passenger Side Front Door Latch| 8009PFL| 1| 1
7| | Driver Side Rear Door Latch| 8009DRL| | 1
8| | Passenger Side Rear Door Latch| 8009PRL| | 1
9| | Hinge Bolt M8x20| 28201| 4| 8+1 extra
10| | Hinge Lock Nut M8| 10082| 4| 8
11| | Metal Washer| 1508012| 8+1 extra| 16+2 extra
12| | Wrench| #13| 1| 1
13| | Allen Wrench| #5| 1| 1
14| | Allen Wrench #4| #4| 1| 1

WARNING
This product is intended to provide added “off-road” convenience and utility to your vehicle.This product is not intended to provide occupant containment or protection in the event of an accident or rollover. Further, “on road” use may involve increased risk of serious injury in the event of side-impact accidents. To reduce risk from these types of injuries: Always wear seat belt and shoulder harness for all vehicle occupants.Keep arms and body inside vehicle. Drive safely, read and understand all manufacturers warnings and product instructions before installation. Periodically check and adjust all latches and fasteners, Failure to do so could result in the doors not latching securely.

Attach the front door latch to back of the door with (2) M8x20mm bolts, (2) flat washer and (2) lock nut.DO NOT FULLY TIGHTEN hardware. Tap washer and nut on wrench to easy access back of door looking bracket. JL 2DOOR SKIP THIS STEP. Attach the rear door latch to back of the door with (2) M8x20mm bolts, (2) flat washer and (2) lock nut.DO NOT FULLY TIGHTEN hardware. Tap washer and nut on wrench to easy access back of door looking bracket.
CAUTION ! To avoid risk of injury latch mechanism must be properly adjusted before use. Inspect and adjust the door latch alignment to the door striker loop on the vehile. Check next step for adjust latch. Do not use door/latch if damaged.
The rubber stop should not hit the jeep while adjusting.Open the latch by lift the latch handle up. Align the lock to the vehicle striker. Leave a little space between the Jeep and the lock. Make sure the lock hits the sticker in the middle. Then tighten the lock. Adjust again if needed.
Adjust the rubber stop so the doors do not move when driving. Turn the rubber to adjust. Adjust the 2 screws if needed.

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET

CUSTOMER SERVICE:SERVICE@EZTRUNK.NET
Text & Call : 203-901-0055 / Call 203-591-9060
RAZOR JL-JLU-JT Aluminum Tube Doors _Ver. A
07/05/22

Documents / Resources

| EZTRUNK 1918 0092 Aluminum Tube Doors [pdf] Instruction Manual
1918 0092, 1918 0094, 1918 0092 Aluminum Tube Doors, Aluminum Tube Doors, Tube Doors, Doors
---|---