EZTRUNK 1900 0082 EZ Door Holder Cart Instruction Manual
- June 13, 2024
- EZTRUNK
Table of Contents
EZTRUNK 1900 0082 EZ Door Holder Cart Instruction Manual
BEFORE BEGINNING, SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Please read instructions fully before beginning assembly
| NO | Illustration | Description | Part # | QTY |
|---|---|---|---|---|
| 1 | Upper Frame Tube | 81401 | 1 | |
| 2 | Base Frame Tube | 81402 | 1 | |
| 3 | Stle Plats | 81404 | 4 | |
| 4 | Door Hinge Ph Bracket | 81406 | 6 | |
| 5 | Meet Castr | 81408 | 5 | |
| 6 | BotoMbeet Castr Flab | 81409 | 5 | |
| 7 | U Boit | 81410 | 6 | |
| 8 | Thurrt• Turn Nut | 81411 | 2 | |
| 9 | Redangle Plats | 81412 | 2 | |
| 10 | Staight Base Tube | 81413 | 2 | |
| 11 | Lodchg Pin | 08352 | 4 | |
| 12 | Side Plat / Base Frame Tthe Bdt | 08452 | 8 | |
| 13 | Nylon Washer | 1408010 | 16 + 2 extra | |
| 14 | Washer (On U Bolt ) | 1206010 | 8 + 2 extra | |
| 15 | MB Washer (On Wheel) | 1608010 | 5 | |
| 16 | Mask Cap For Nut | 20082 | 5 | |
| 17 | Large Lodc Nut | 10082 | 13+2 extra | |
| 18 | Small Lock Nut | 10062 | 10+ 1 extra | |
| 19 | #5 Allan Wench | #5 | 1 | |
| 20 | #108#131Atench | #10 | 1 |
Assembly Instructions
-
Clip the wheel plate to the Base Frame Tube, tighten the nuts on thewheels. Place plastic caps on the wheel nuts
-
Place the bottom wheel Castor plate on wheel assembly to straight base tube. The small hole is facing up. Tighten the bolts and then place plastic caps on the wheel nuts
-
Connect the two plates and tubes together. Tighten the two middle upright tube screws. The folding outside screws should be snug not tight, so the bottom folding base swings up easily. The base should not drop down unless you pull it down
-
Insert the locking pins to secure the base
-
Place door hinge pin brackets on the upright tubes and snug the nuts so they are adjustable to your door in the next steps.
-
Place middle door hinge pin bracket on the upright tubes. Snug the nuts so they are adjustable to lock down your door in the next steps. The Middle bracket is a locking mechanism. This protects the doors from falling off when moving the cart.
-
Make sure the cart is on level ground when loading the doors
Place the doors on the cart with the bumpers on the outside and adjust the brackets so they are hitting the top of the door hinge brackets.
Tighten the cart hinge brackets so they do not move. Make sure the cart is on level ground when loading the doors.
-
Slide down the safety hinge lock and thumb turn to tighten. This locks the doors in place for moving and storage.
-
Lock the wheels for storage.
How To Lock The Castor
-
Take the pins out to fold.
Folding The EZ-Door CART
-
Place the pins in the bottom locking holes and store the other pins in the holes.
PATENT NO. : 10,981,588 & PATENT PENDING
CUSTOMER SERVICE: SERVICE@EZTRUNK.NET
Text & Call :
203-901-0055 / Call
203-591-9060
Customer Service
Any questions? WE ARE HERE TO HELP!
Text or Call 203-901-0055 /
Call203-591-9060
EMAIL US: SERVICE@EZTRUNK.NET
7 days a week 8:00 AM – 8:00 PM EST