motionics BlueDial-LT Bluetooth Digital Indicator Lite User Guide
- June 13, 2024
- motionics
Table of Contents
motionics BlueDial-LT Bluetooth Digital Indicator Lite
Important Notes
Do NOT open the device. Opening causes permanent damage and voids the warranty.
BlueDial-LT transmitter & digital indicator should be both on before pairing.
BlueDial-LT operates on two separate batteries:
- Rechargeable built-in Li-Po battery for the Bluetooth transmitter
- Coin SR44 or LR44 battery for the digital dial
Description
Included in the box:
- BlueDial-LT
- 1X USB Charging Cable
- 1X USB Power Adapter
- 1X User Guide
Compatible Software:
- iOS: MultiGage Reader (download for FREE from the App Store)
- Android: MultiGage Reader (download for FREE from the Play Store)
- Windows: MultiGage Reader (BLE dongle required, download for
FREE from www.motionics.com
Go to Resources > Download > Software)
Quick Start:
- Turn on BOTH Dial indicator and Bluetooth transmitter.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run the software, tap Scan/+ button to enter pairing page.
- Connect to BlueDialLTXXX. Connection may take a few seconds, once paired, BlueDial-LT reading shows in the software.
Contact Information:
Website: www.motionics.com
Email: info@motionics.com
Made in the U.S.A.
Important Notes
- Turn off the device (1 and 5) after use. It will NOT turn off automatically.
- Do NOT open the device. Opening causes permanent damage and voids the warranty.
- BlueDial-LT transmitter & digital indicator should be both on before pairing.
- BlueDial-LT operates on two separate batteries:
- Rechargeable built-in Li-Po battery for the Bluetooth transmitter
- Coin SR44 or LR44 battery for the digital dial
Description
- Dial On/Off – press to turn dial on/off
- Origin Button – press to zero dial reading; this can also be done in the App
- Unit Button – select reading in inch/mm
- Dial Battery – insert coin battery SR44 or LR44 for digital dial
- BLE On/Off – press to turn Bluetooth transmitter on/off
- Status LED
- Bluetooth transmitter is on
- BlueDial-LT is in charge
- BlueDial-LT is fully charged
- Micro USB Port – connect to USB cable to charge BlueDial-LT
Included in the box
- BlueDial-LT 1X
- USB Charging Cable 1X
- USB Power Adapter 1X
- User Guide 1X
Compatible Software
- iOS: MultiGage Reader (download for FREE from the App Store)
- Android: MultiGage Reader (download for FREE from the Play Store)
- Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)
Quick Start
Insert SR44 or LR44 coin battery to dial indicator if it’s first time use.
- Plug in USB Bluetooth dongle if using Windows PC.
- Run the software, tap Scan/+ button to enter pairing page.
- Wait for the software to finish scanning nearby devices, select BlueDiaILTXXX to connect.
- Connection may take a few seconds, once paired, BlueDial-LT reading shows in the software.
Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved.
info@motionics.com
Made in the U.S.A.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>