smartmi Evaporative Humidifier 2 User Manual
- June 3, 2024
- smartmi
Table of Contents
Smartmi Evaporative Humidifier 2 User Manual 01
Warning
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
- Unplug the appliance during filling and cleaning.
- Never leave water in the reservoir when the appliance is not in use.
- Empty and clean the humidifier before storage. Clean the humidifier before next use.
To prevent electric shocks, fire, personal injury, and other damage, do not use the humidifier when
- The main body of the humidifier is tilted. Tilting the humidifier may cause the water level to be reported incorrectly or the water to overflow. The humidifier should be placed on a flat and stable surface while in use.
- There are nearby objects that may fall or are unstable. · In hot, humid or wet places such as bathrooms.
Precautions
Handling
- Always turn the humidifier off and unplug it before moving it.
- Before handling or moving the humidifier, drain any remaining water from the water tank.
Installation
- Follow the instructions to install the humidifier correctly and prevent electric shocks, fire, personal injury, and other damage.
- Do not turn the humidifier on before it is fully assembled.
Adapter
Follow the instructions below when using the adapter to prevent electric shocks, fire, or damage
- Connect the adapter plug to an appropriate outlet.
- Do not pinch, bend, or twist the adapter cord excessively. Otherwise, the wire inside may be broken or exposed.
- Unplug the humidifier before servicing or moving the humidifier.
- Power the humidifier using the standard adapter supplied with the humidifier. Due to safety considerations, damaged adapters or power cords must be replaced by the manufacturer or a professional from a designated repair service provider.
In use
- If the humidifier generates abnormal noises, produces odors, or becomes hot, turn it off immediately.
- Do not put fingers or foreign objects into safety parts, movable parts, air inlets, or outlets.
- Do not let objects such as hair or fabric come near the main unit, as these objects may get caught in or block the air inlets and outlets.
- Do not lean on or tilt the humidifier while in use.
- Ensure sufficient ventilation when using the humidifier at the same time as household gas appliances (such as gas stoves and gas water heaters) to prevent carbon monoxide poisoning.
- The reset alarm may fail if water accumulates in the upper housing. The alarm will function normally again after the water has evaporated.
Product Overview
Read this manual carefully before use, and retain it for future reference.
Control panel
Note ： The display shows the water level percentage while water is being
added. While in normal use, it shows the relative humidity level.
The water level indicator flashes red when the minimum water level is
detected. It is fully illuminated and flashes when the water level exceeds
100%.
Use
Adding water
Suitable water quality： domestic, mineral, or purified water.
-
Adding water through the water inlet
You can add water to the water tank through the water inlet while the humidifier is unplugged. -
Adding water to the water tank
When the upper housing has been removed, you can add water directly to the water tank. Stop adding water before it reaches the maximum water
level line (at the MAX bar).
Note: When the water volume exceeds the maximum water level line once the humidifier powered again, the water level indicator flashes and the humidifier generates a beeping warning sound. If this happens, immediately unplug the humidifier and pour out proper amount of water from the tank.
Features
On-off/settings switchover
Press the “On-off/settings” button to turn the humidifier on. When the
humidifier is turned on for the first time, the default setting is Automatic.
Press the button to switch settings. Press and hold the button for 2 seconds
to turn the humidifier off.
Press the “On-off/settings” button to switch between Level 1 , Level 2 , Level
3 , and Automatic in turn.
Display brightness adjustment
Press the “Display brightness” button， to adjust the brightness of the display
and switch between bright, dim, and off.
Wi-Fi resetting
Press and hold the “Display brightness” button and “On-off/settings” button
for 5 seconds. The Wi-Fi icon will flash, showing that the humidifier is
waiting for a connection and that the Wi-Fi has been reset successfully.
Connect with Mi Home / Xiaomi Home APP
This product works with Mi Home / Xiaomi Home app
*. Control your device, and interact it and other smart home devices with Mi Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search “Mi Home /
Xiaomi Home” in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow
prompts to add your device.
- The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Maintenance and installation
Turn the humidifier off and disconnect it from the power supply before performing the following operations.
Cleaning the water tank
To prevent the water tank from becoming contaminated and producing odors,
rinse the water tank with clean water or wipe it with a soft cloth to keep it
clean.
There are drainage holes at the bottom of the water tank. Do not use the water
tank straight away after it has been fully rinsed or after adding too much
water by accident. Instead, place the water tank on the ground with the
drainage holes facing down to drain the water from inside the tank.
It is recommended to clean the water tank once a week or as required by the frequency of use.
Air-drying mode
Enabling air-drying mode
When the water tank is less than 10% full, the humidifier will continue to run
for about 8 hours to air dry the water in the water tank and prevent
contamination and odors.
Disabling air-drying mode
When the water tank is less than 10% full, the humidifier automatically stops
running.
Tip: You can enable or disable air-drying mode using the “Mi Home /
Xiaomi Home” app.
Cleaning the evaporator
The evaporator can be removed and wiped with a soft cloth or rinsed with clean
water. You can also turn the knob to remove each disc of the evaporator for
servicing and cleaning.
As shown in the figure, the evaporator discs can be removed by turning the knob clockwise.
Note: Clean the water tank using clean water at room temperature only. Do not
add fragrances such as essential oils to the water. After use,
immediately drain the water in the water tank and any water remaining in the
unit to prevent the unit from becoming contaminated by bacteria and other
microorganisms.
Specifications
Product name| Smartmi Evaporative Humidifier 2| Rated voltage of
adapter| 100-240V—, 50/60Hz
---|---|---|---
Product model| CJXJSQ04ZM| Rated voltage of humidifier| 12V=
Product type| Evaporative humidifier| Rated power| 8W
Item dimensions| 240mm x 240mm x 363mm| Noise| 50dB(A)
Gross weight| Approx. 5.1kg| Net weight| Approx. 4.3kg
Rated humidification
capacity| 260mUh| Water tank capacity| Approx. 4.0L
RF Specification:
Wi-Fi 2AG (2400 – 2483.5 MHz), Max. RF Output Power: <20 dBm
Under normal use of condition, this equipment should be kept a separation
distance of at least 20cm between the antenna and the body of the user.|
Network standby power
consumption| < 2.0W
Note: Noise is measured in a laboratory environment.
Regulatory Compliance Information
Europe — EU declaration of conformity
Hereby, Beijing Smartmi Electronic Technology Co., Ltd. declares that the
radio equipment type CJXJSQ04ZM is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://smartmi.com.cn/doc.html
Europe — EU declaration of conformity
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
Manufacturer: Beijing Smartmi Electronic Technology Co., Ltd.
Address: Room 6111, 1st Floor, Building 6, No.18 Xueqing Road, Haidian
District, Beijing, China
220128
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>