di-soric IRSD-50-G3-B4 Inductive Ring Sensor Owner’s Manual
- September 11, 2024
- di-soric
Table of Contents
di-soric IRSD-50-G3-B4 Inductive Ring Sensor
Product Specifications
| Internal Diameter | 50.1 mm |
|---|---|
| Service Voltage | 10 – 30 V DC |
| Switching Output | Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/ PNP/NPN, 100 |
mA,
NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC
No-load Current (max.)| 30 mA
Speed of Parts (min.)| 0.1 m/s
Speed of Parts (max.)| 35 m/s
Protection Type| IP 67
Product Usage Instructions
Safety Instructions
General Safety Notice: This product is not a safety component and may not be used for personal protection. Non-compliance can lead to death or serious injuries. Only use as directed.
Operating Conditions
Ambient Temperature: Ensure the product operates within the specified temperature range during operation.
Installation
Install the inductive ring sensor according to the provided guidelines in the user manual. Refer to product information or customer support for adapters providing field wiring means.
Power Supply
Connect the sensor to a power supply within the voltage range of 10 – 30 V DC.
Switching Output Configuration
Configure the switching output based on your application needs, selecting the appropriate mode (Gegentakt/PNP/NPN) and current requirements (100 mA, NO/NC).
Speed Adjustment
Adjust the speed of parts based on your application requirements, ensuring it stays within the specified range of 0.1 m/s to 35 m/s.
Maintenance
Regularly inspect and clean the inductive ring sensor to ensure optimal performance and longevity.
Frequently Asked Questions
- Is the inductive ring sensor suitable for outdoor use?
- No, the enclosure type is specified for indoor use only.
- What is the maximum service voltage supported by the sensor?
- The sensor supports a service voltage range of 10 – 30 V DC.
- Can the inductive ring sensor be used for personal protection?
- No, it is not designed for personal protection purposes.
Dimension
Ring diameter mm
- BK : black
- BN: brown
- BU: blue
- WH: white
Technical data
| Technical data | +20°C, 24 V DC |
|---|---|
| Internal diameter | 50,1 mm / 50.1 mm / 50,1 mm |
| Service voltage | 10 … 30 V DC |
Switching output
| Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/ PNP/NPN, 100 mA, NO/NC / Push-
pull/PNP/NPN, 100 mA, NO/NC
No-load current (max.)| 30 mA
Speed of parts (min.)| 0,1 m/s / 0.1 m/s / 0,1 m/s
Speed of parts (max.)| 35 m/s
Protection type| IP 67
Ambient temperature during operation| -25 … +70 °C
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directedAs of 05/17/24, subject to change
Contact
- di-soric GmbH & Co. KG
- Steinbeisstraße 6
- DE-73660 Urbach
- Germany
- Tel: +49 (0) 7181/9879-0
- info@di-soric.com
- www.di-soric.com
Enclosure Type 4X (indoor use only), 12, 13 Supply Class 2 NFPA 79 Applications only. For adapters providing field wiring means refer to product information or customer support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>