MAXVIEW MXL017 Target Software Update Procedure For PC Users User Guide
- June 13, 2024
- MAXVIEW
Table of Contents
MAXVIEW MXL017 Target Software Update Procedure For PC Users User Guide
STEP 1 – Download file
-
You need an empty/blank USB flash memory stick to copy the file onto. Please make sure it is formatted to FAT. See page 4 for more details.
-
Insert your USB memory stick into an empty slot on your Mac desktop or laptop.
-
Find the software update section on the Maxie website https://maxview.co.uk/software-updates/
Left click Download Update File – TARGET
-
Open the ZIP file and copy the hex file.
-
Paste the file onto the USB drive (TARGET)
STEP 2 – Update file to control box
-
Turn on Control Box.
-
Press and hold the SYNC/Update button on the front of the Control Box for approximately 7 seconds until SYNC/update LED illuminates RED.
-
Insert the USB flash memory stick. The SYNC LED will flash GREEN whilst data is being transferred. Transfer can take between 10-60 seconds.
-
When the SYNC LED goes out turn off the Control Box power and remove the USB flash memory stick.
-
Turn power on, update LED will flash RED and GREEN whilst data is written to Control Box memory.
-
When SYNC LED goes out update is complete.
Troubleshooting
Formatting USB stick
-
Right click removable disk option (USB stick) in ‘computer’
-
Right click and select format
-
Format USB Stick by selecting FAT (Please note any files on USB stick will be erased)
-
Your USB stick is ready for the update file.
