Tribit XSound Plus 2 Portable Wireless Speaker Instruction Manual

June 13, 2024
Tribit

Instruction ManualTribit XSound Plus 2 Portable Wireless
Speaker Plus 2 Portable Wireless Speaker

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS65 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/BTS65-eu-doc.pdf

To Charging The Speaker

Tribit XSound Plus 2 Portable Wireless Speaker -
ChargingWhen charging, the red light is always on.
When fully charged (about 4 hours), the red light turns off.

Power On/Off

Tribit XSound Plus 2 Portable Wireless Speaker - Charging
1Short press the power button once to turn on/off the power.
‘The speaker will automatically shut down when there is no audio Input or operation for 16 minutes,

Pairing

Tribit XSound Plus 2 Portable Wireless Speaker -
PairingShort press the Bluetooth button once to enter pairing mode.
Long press the Bluetooth button 25 to disconnect the Bluetooth connection.
The speaker can be connected to Up to two Bluetootn devices at the same time.

Controls

Tribit XSound Plus 2 Portable Wireless Speaker -
ControlX1: Press once.
X2: Pross twice
X3+ Press three times.
25: Press and hold for 2 seconds.
Reset : Press and hold the +- button at the same time for 55

EQ Selection

Tribit XSound Plus 2 Portable Wireless Speaker - Control
1Short press the EQ button to switch the music mode.
‘The white light is always on for XBass mode.
‘The blue light is always on for the audiobook mode.
The ight off for XBass off.

Stereo Mode

Tribit XSound Plus 2 Portable Wireless Speaker - Control
2

  1. First connect speaker A to Bluetooth on your phone and then press the TWS buttony
  2. Ensure that speaker B is not connected to any device, and then press the TWS button:
  3. Both speakers broadcast voice at the same time, incicating that the TWS is successful and speaker A is the. host

Party Mode

Tribit XSound Plus 2 Portable Wireless Speaker - Control
3

  1. Two speakers already in stereo mode, press any speaker TWS button;
  2. Hear the voice announcement, indicating the switch to party mode.
    Long press any speaker TWS button 25 to disconnect the group.

TRIBIT APP

Tribit XSound Plus 2 Portable Wireless Speaker - Control
4Download the TRIBIT app to adjust the EQ Settings, upgrade the firmware and explore more features.

Safety Precautions

  • Do not place the speaker in a place where itis easy to fail,
  • Do ot disassemble, repair or modify this product by yourself
  • Keep the speaker away from extreme temperatures,
  • Do ot use the speaker in an outdoor thunderstorm environment.
  • Do ot use any corrosive cleaners or other chemical Solutions to clean the speaker.
  • 12-month warranty.

Specifications

Bluetoot Version V5.3
Output Power 2*15W
Bluetooth Protocot A2DP, AVRCPHFPHSP
Frequency Response Range S50-20KHz
Frequency Band Range 2402-2480MHz
Maximm Transmission Power ≤6dBM
Battery 2400mAh*2
Play Time 24 hours(At 60% volume with XBass oof)
Crarging Time About 4 hous
Waterproofing Grade IPX7
Size: 198.5mm x 66.5 mm 70mm
Weight: 580g

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
“This equipment has been tested and found to comply with the limits for & Class B digital device, pursuant to Part 15 of the FCC Rules. These mits are designed to provide reasonable protection against harmful nterference in a resicential installation. This equipment generates uses and an radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will ot occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV techrician for help.

‘This device complies with part 15 of the FCC rues.
Operation s subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including Interference that may cause undesired operation.
IC Caution
“This device complies with Industry Canada licence-exempt RSS standardis).
Operation s subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause Undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals