eta 2052 Crema II Electric Hand Beater Instruction Manual

eta 2052 Crema II Electric Hand Beater

INSTRUCTIONS FOR USE

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.

SAFETY WARNING

• Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.

• Check whether the data on the type label correspond with the voltage in your socket.
  The power cord plug has to be connected to the properly connected and grounded socket according to the national standard.

• This appliance must not be used by children.

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

• Children must be kept out of reach of the appliance and its power cord.

• If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.

• Before replacing accessories or accessible parts, which move  during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!

• Always unplug the appliance from power supply if you leave it  unattended and before assembly, disassembly or cleaning.

• Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.

• Be careful when pouring hot liquid into the food processing device or the mixer because it may spurt out of the appliance because of sudden boil.

• The appliance is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing  accommodation with breakfast). It is not intended for commercial use!

• When the appliance is in operation, prevent pets, plants or insects to get in contact with it.

• Never submerge the drive unit under water and do not wash under running water!

• Do not plug or unplug the appliance from a socket with wet hands and do not pull the power cord!

• Never leave the appliance unsupervised and check it during the whole time of water heating!

• Use the appliance in the working position only at places with no risk of turning over and in  sufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill), flammable objects (e.g. curtains, drapes, etc.) and wet surfaces (e.g. sinks, wash basins, etc.).

• This appliance is not intended for outdoor use.

• The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).

• It is not allowed to modify the surface of the appliance in any way (e.g. using a self-adhesive wallpaper, foils, etc.)!

• Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).

• If the propulsion unit is operating, do not remove the accessories.

• The maximum time of processing is 10 minutes. Then wait for 15 minutes, which is necessary for the drive unit to cool down.

• Check if the switch is in the off position before each connecting of the appliance to the el. outlet and always unplug the appliance from the el. outlet after finishing work.

• Due to safety it is not possible to change the attachments while the drive unit is in operation.

• Do not use the accessories in containers, in which you heat food at the same time using heat sources (e.g. heater, electric/gas/induction cooker, hot plate etc.).

• Do not process foods with a temperature over approx. 80 °C (176 °F).

• If the processed ingredients begin to stick on the accessories (e.g. whisks, kneading hooks) or container, turn the appliance off and clean the accessories carefully with a spatula.

• Do not mix attachments (whisks B and hooks C).

• Do not insert accessories into any body cavities.

• Make sure that your hair, clothes and accessories do not get into dangerous vicinity to the rotating parts!

• Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance and the accessories.

• If the propulsion unit is operating, do not remove the accessories (e.g. whisks, hooks), and bowl do not fold out the bracket of the stand!

• Make sure the whisks do not hit the walls of the utensils during operation or do not get stuck in the thick matter or frozen ingredients.

• Make sure that the power supply cable does not get in between the rotating parts of the appliance.

• The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang  over the edge of a table or work tables. Hitting, stumbling or pulling the power cord e.g. by children can result in tilting over or drawing the appliance down and serious injury!

• If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.

• Check the condition of the power cord of the appliance regularly.

• In order to ensure safety and proper function of the appliance, use only original spare parts and accessories approved by the manufacturer.

• Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.

• Caution: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered  or placed properly.

• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.

• All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.

• The manufacturer is not responsible for damage caused by improper use of the appliance and the accessories (e.g. food deterioration, fire) and its guarantee for the appliance does not apply in situations when the safety warnings above are not complied with.

 DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. 1)

A – drive unit
A1 – speed selector A4 – handle
A2 – TURBO button A5 – power cord
A3 – holes for connecting the accessories B, C A6 – accessories release button
B – whipping beaters B1 – whipping beaters
C – kneading hooks C1 – kneading hooks
D – stand
D1 – fold-out bracket D3 – drive unfastened button
D2 – bracket fastener button
E – rotary bowl 3.4 l

Attachments for the respective ETA models:

PREPARATION FOR USE

Remove all the packing material and take out the beater with the accessories. Remove all possible adhesion foils, stick–on labels or paper from the appliance. Before the first use, wash the parts that will be in contact with food in hot water with a detergent, rinse them thoroughly with clean water and wipe till dry, or let them dry. Plug the power cord connector A5 to an electric socket.

Using individual levels, (fig. 2)
0 – off, 1 to 5 – speed options (using for whipping, mixing, kneading),
TURBO button – the motor is running at max. power the whole time the button A2 is pressed, – may be use at any speed level except 0.

Stand (D) – for ETA2052
Folding out the bracket – press the D2 button and fold out the bracket D1. To fold the bracket back press the D2 button again. The bracket will fold back and fasten (audible click will sound).

Rotary bowl (E) – for ETA2052
Inserting the bowl into a stand – fold out the B1 bracket and place the bowl into the stand B so that the protrusions on the bowl fit into the protrusions on the stand along the whole rim.
Proceed reversely when removing the container.

USE OF THE ACCESSORIES (Fig. 2, 3)

Consider the following tips for processing examples and inspiration whose purpose is not to provide instructions but to show the various options of food processing. Preparation (processing) times of ingredients range within minutes. Select the amount of processed ingredients so that the maximum of the rotary bowl E (2.5 l) is not exceeded. Bigger amounts of ingredients must be divided in several portions and the content of the utensils must be checked regularly. We recommend stopping the working, turning off the appliance (position 0) and remove all ingredients which have stuck on the accessories B or the walls  of the utensils and lid (see I. SAFETY PRECAUTIONS). Turn off the mixer A and unplug the fork of the supply cord A5 from the el. outlet after finishing work. Bowl E is suitable for use in a microwave oven.

Whipping beaters (B)
Use: Whisking egg whites, mousse, creams, whipping creams, sponge cake dough/batter, mashes, etc.
Switch level: 1 – 5, whipping time about 1 – 5 minutes
Insertion: mutual position is designated by their construction, it is therefore impossible to  switch the whisks in the openings. Insert the beaters to the respective holes A3 in the lower part of the drive to the maximum position. Release the whisks by pressing the release button A6.

Recommendation

• When whipping, use the substances at room temperature.
• First put liquid ingredients to the bowl and only then put solid ingredients in to achieve the best results.
• First whip at low speed so that the dough does not splash out. Only then you can go to higher speed.
• If beating is not optimal, make sure that the beater is not greasy, or add a little lemon juice or salt.
• Cool the cream or whipping cream to at least 6 °C (at least 200 ml) before processing.
• We recommend using a narrow container for whipping cream.
• Never use whipping beaters for mixing tough materials, such as yeast dough.

Kneading hooks (C)
Use: Preparing spreads, mixing potatoes, spinach, mixing dough, etc.
Switch level: 1 – 3, kneading time about 1 – 5 minutes.
Insertion: Mutual position is given by their construction; for this reason mutual interchangeability of the hooks in the holes is not possible. Insert the hooks to the respective holes A3 in the lower part of the drive to the maximum position.\ Release the hooks by pressing the release button A6.

Recommendation

• When kneading, use the substances at the room temperature.
• First mix yeast in lukewarm milk. As soon as the dough gets into the shape of a ball, stop kneading as you are used to, or leave the dough rise according to the recipe.
• When preparing tough dough, we recommend putting loose ingredients in the bowl first for better mixing and then adding liquid ingredients.

Warning

• Switch on the appliance only when the accessories are immersed into the processed ingredients.

• The hooks and whisks can be released from the propulsion unit only when the speed selector A1 is in position 0.

• For whipping, only one whipping beater can be used in a suitable container.
  Choose the size of the container according to the amount of the prepared mass.

• When preparing a larger amount of dough (max. 0.5 kg kneading very heavy types of dough and 1.8 kg mixing light types of dough 1 batch) process it in several batches. Under no circumstances should you prepare more than two batches after each other.

• Various types of flour may differ significantly in the amount of liquids needed and the stickiness of the dough may have a major affect on the loading of the hand mixer. If you hear that the hand mixer is being excessively loaded, turn it off, remove half the dough and process each half separately.

Stand with rotary bowl (D, E) – for ETA2052
Use: for whisking and mixing without having to hold the propulsion unit in hand.
Inserting: place the stand D on a suitable working surface. Fasten the desired accessory B/
B1 into the propulsion unit A or C/C1. Put the mixer A on the bracket D1 so that the tooting on the accessory fits in the tooting in the bracket and then push the mixer all the way till it fits closely into the depression in the bracket (you will hear an audible click). Fold out bracket D1. Place the bowl E with the ingredients on the stand. Fold the bracket back only after its arrest has been clicked in (fig. 3).
Removing the propulsion unit (A): by pressing button D3, the arrest will be released and it is then possible to remove the propulsion unit A from the fold-out bracket D1.

MAINTENANCE

Before any handling with the appliance or its maintenance, switch off the appliance and unplug the power supply cord from the electric socket. Do not use rough and aggressive detergents! To clean the propulsion unit A and stand D use soft damp cloth with soap.Make sure that water does not get inside the appliance. Wash the other accessories right after use in hot water with a little detergent added, rinse them with clean water and wipe them till dry (you can also use a dishwasher). Some ingredients can colour the accessories in some way. But this does not affect the function of the appliance and it is not a reason for a claim. This coloring usually disappears in some time. Never dry plastic moldings over a heat source (e.g. heater, stove, radiator). If the power cord becomes dirty, wipe it with a damp cloth.

Storing the appliance and accessories
Store the drive unit and accessories at a dry, dust-free place, out of reach of children and legally incapacitated people.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, after disconnecting it from power supply we recommend its cutoff and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

TECHNICAL DATA

Voltage (V) specified on the type label of the appliance
Input (W) specified on the type label of the appliance
Weight of drive unit (kg) about 1.8
Size of the product (mm) 286.9 x 213 x 350 Protection class of the appliance II.
Noise level: Acoustic noise level of 85 dB(A) re 1pW Input in off mode is < 0,50 W.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.

HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

The symbol indicates a WARNING.

References

• AEG Hausgeräte | Setzen Sie auf Qualität | AEG
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>