Ciro3D TM7llllldJ Goldstrike Speaker Grills Installation Guide
- June 13, 2024
- Ciro3D
Table of Contents
GOLDSTRIKE SPEAKER GRILLS
TM7llllldJ Goldstrike Speaker Grills
Parts Included:
1. Left Speaker Grill
1. Right Speaker Grill
INSTALLATION INSTRUCTIONS:
-
Park on a level surface and shut off the motorcycle. Lift motorcycle onto its center stand if available. Ensure the engine has time to cool before installation.
-
Clean the left and right speaker surround with hot water and soap to remove all dirt and debris.
-
ATTENTION: Thoroughly clean the mounting surfaces with denatured alcohol to remove all wax, oil, and residue.
NOTE: New motorcycles are delivered from the factory covered in protective oil. Remove it before installing this product.
NOTE: Do not install if the temperature is below 50° F. The adhesive will not cure properly. -
Test fit the Speaker Grills to familiarize yourself with their location. Take note where the 3M VHB tape is located on the back of the Speaker Grills.
-
Apply the adhesion promoter to both left and right speaker surrounds following the directions on the package. Apply the promoter where the 3M VHB tape will come into contact with the speaker surround.
-
Peel off the adhesive liner from the 3M VHB tape on the back of the Speaker Grill and press it onto the speaker surround.
WARNING: This indication alerts you to the fact that ignoring the
contents described herein can result in potential serious injury or death if
not followed.
CAUTION: This indication alerts you to the fact that ignoring the
contents described herein can or will result in material damage and/or
personal injury.
ATTENTION: This indication alerts you to the fact if you ignore this
detail you will a~ect the performance or functionality of the product.
All Ciro products are designed for “easy assembly” and/or “plug and play”. We
recommend a competent mechanic install our products, using standard mechanical
procedures to assure a safe and successful installation.
NOTE:
Ciro products are designed and manufactured under very strict quality control.
Ciro warrants that products sold to the original purchaser shall be free from
any defects in materials and workmanship for a period of 3 (three) years from
the date of purchase, and a lifetime warranty against LED failure. Ciro will
have no obligation if the customer cannot show proof of purchase. Warranty
will not be granted unless the part is properly installed and maintained. Ciro
will not be liable for any consequential and incidental damages, including
labor, or non-Ciro products. Please visit our website Ciro3d.com for our
complete warranty policy.
G0078350, REV. –
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>