DIGITUS DS-55526 4K HDBaseT HDMI KVM Extender Set User Manual
- June 9, 2024
- DIGITUS
Table of Contents
DIGITUS DS-55526 4K HDBaseT HDMI KVM Extender Set
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
The HDBaseT'” HDMI KVM Extender Set enables uncompressed, high-resolution AV signal transmission over large distances using a CAT6 (or higher) network cable. The maximum transmission distance is 150 m. Thanks to PoC, only one unit needs to be supplied with power by an external power adapter. The receiver unit features two USB 2.0 ports for connection of webcam, data carrier, mouse and keyboard, for example. The set also supports touch displays. Thanks to the touch panel back control, the signal source can also be controlled using finger gestures. Bi-directional IR transmission is also included as a feature.
Main Features
- Supports HDBaseT'” 1.0 via CAT6/7 /8 cable up to 150 m
- Transmission distance – Full HD (1080p/60Hz): 150 m (max.)
- Transmission distance – UHD (4K/60Hz): 120 m (max.)
- Supports 4K2K/60Hz (4:4:4)
- Video bandwidth: 18 Gbps
- 2x USB 2.0 ports on receiver for connection of webcam, data carrier, touch panel, mouse and keyboard, for example.
- Touch display support/ Touch panel back control
- PoC (Power over Cable) – Only the unit requires an external power adapter
- EDID support (2 modes) -1: Copy – HDMI output receiver/ 2: Standard – 1080p, 2 channel
- HDBaseT Mode: USB supports USB 2.0 transmission (support connecting with USB camera, USB flash drive and other devices); the audio & video signal transmission distance can be extended up to 328ft / 100m for 4K60
- Bi-directional IR signal transmission
- Long Reach Mode: USB only supports HID (Human Interface Device) device; the audio & video signal transmission distance can be extended up to 492ft / 150m for 1080P or 394ft / 120m for 4K60
Package Contents
- lx Transmitter unit
- lx Receiver unit
- lx IR transmission cable (1.5 m)
- lx IR receiver cable {1.5ml
- lx Power adapter (DC 24V/1A, 1.5 m)
- lx U5B connecting cable (1.5 m)
- lx Mounting accessories
- lx User manual
Product Specification
Operation Controls and Functions
Transmitter Unit
| No | Name | Description |
|---|---|---|
| 1 | PWR LED | The red LED is on when the Transmitter is |
| powered on | ||
| Used for audio EDID setting (dial to COPY |
2
| EDID DIP
switch
| by default).
COPY: Copy the EDID of the HDMI OUT
port of Receiver.
| | STD: Default 1080P 2CH
3| SERVICE| Firmware update port
| | DC 24V/1A power input port.
| | Note that the extender supports POC
4| DC24V| function, it means that either Transmitter
or Receiver is connected to 24V/1A power
| | supply, the other doesn’t need power
| | supply
5| HDBTOUT| HDBT output port, connecting to the HDBT IN port of the Receiver
with CAT6 cable.
6
| Link Signal Indicator
(Green)
| • Illuminating: Transmitter and Receiver are in good connection status
Data Signal
7 Indicator
{Yellow)
| • Flashing: Transmitter and Receiver are in poor connection status
• Dark: Transmitter and Receiver are not connected
• Illuminating: HDMI signal with HDCP
• Flashing: HDMI signal without HDCP
• Dark: No HDMI signal
---|---
8 HDMI IN
| HDMI signal input port, connecting to
HDMI source device such as DVD play or Set Top Box
9 IR IN
10 IROUT
| Connect to IR receiver cable, the IR receive signal will emit to the IR OUT port of the Receiver
Connect to IR blaster cable, the IR emit
signal is from the IR IN port of the Receiver
11 PC| USB-B port, connecting to PC
Receiver Unit
| No Name | Description |
|---|---|
| 1 Power LED | The power LED is on when the Receiver is |
powered on
| Used for Mode switching (dial to HDBT by |
|---|
2
| MODE DIP
switch
| default)
HDBT: Switching to the HDBaseT Mode
Long Reach: Switching to the Long Reach
| | Mode
3| SERVICE| Firmware update port
| | DC 24 / 1 A power input port
Note that the extender supports POC
4| DC24V| function,it means that either Transmitter
or Receiveris connectedto 24/lA power
| | supply, the other doesn’t need power
| | supply
| | HDBT input port, connecting to the HDBT
5| HDBT IN| OUT port of the Transmitter with CAT6
| | cable
6
| ****
Link Signal Indicator (Green)
| • Illuminating: Transmitter and Receiver are in good connection status
• Flashing: Transmitter and Receiver are in poor connection status
• Dark: Transmitter and Receiver are not connected
7
| Data Signal
Indicator (Yellow)
| • Illuminate: HDMI signal with HDCP
• Flash: HDMI signal without HDCP
• Dark: No HDMI signal
8
9
| ****
HDMI OUT
IR IN
| HDMI signal output port, connecting to HDMI display device such as TV or monitor
Connect to the IR receiver cable. The IR signal will send to the IR OUT port of the
Transmitter
10 IROUT
| Connect to the IR blaster cable, the IR signal is from IR IN port ofthe
Transmitter
---|---
11 USB 2.0 ports
| Two USB-A ports, connecting to USB 2.0 devices. (The maximum output current of a single USB 2.0 port is S00mA, exceeding
which it will not work)
IR Pin Definition
IR Receiver and Blaster pins definition as below:
-
IR Signal
-
Power
-
Grounding
-
IR Blaster Signal
-
Power
-
NC
Note: When the angle between the IR receiver and the remote control is ±
45 °, the transmission distance is 0-5 meters.
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
Application Example
- Power Supply
- CAT6 Cable
- DVD or Blu-ray Player
- UHDTV
- IR Receiver
- IR Blaster
- USB Camera
- PC
- USB
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Sch(jffel 3
58513 Ludenscheid
Germany