GOLDEN LIGHTING 0892-3P Jules 3 Light Antique Ivory Pendant Ceiling Light Instruction Manual
- June 13, 2024
- GOLDEN LIGHTING
Table of Contents
Instruction Manual
Thank You for Choosing Golden Lighting for Your Lighting Needs!
0892-3P Jules 3 Light Antique Ivory Pendant Ceiling Light
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop. Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor.
Allow clearance for any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
How to Identify the Fixture’s Wires Hot: Smooth, Black, or Transparent with
Black Inner Thread
Neutral: Ribbed, White or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread For Customer
Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions:
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. From the parts bag remove the mounting strap assembly.
One end of nipple (F) should be attached to mounting strap (A) with washer (C)
and hex nut (D) in place. The other end should have canopy loop (H) attached.
Attach mounting strap (A) to the junction box using mounting screws (B) and a
screwdriver. Tighten securely. Unscrew canopy loop collar (I) from canopy loop
(H). Pass canopy (G) over the mounted canopy loop to test the height.
Approximately half of the canopy loop’s exterior threads should be exposed,
and the canopy loop collar should fit snugly onto the canopy loop.
Remove canopy (G) and adjust the height of nipple (F) and canopy loop (H)
until the desired height is reached.
ASSEMBLING THE FIXTURE
2. Finish putting the outer cage together by hooking arms (Q) into body and
locking the arms (Q) into place using nuts (P) and gasket. Thread the nipple
(M) into coupling (R1). Thread cap (O) and top cap (N) followed by top loop
(L) onto the exposed threads of nipple (M). Pull the wires through top loop
(L) until taut. 3. Measure to determine the correct number of chain links
needed for proper hanging height. If necessary, use a pair of pliers to open
and remove any excess chain. 4. Attach chain connectors (K) to each end of
chain (J). Attach one end of the chain/chain connector to the top loop (L).
Connect the other chain/chain connector to canopy loop (H). Close the chain
connectors (K) to secure. 5. Feed the fixture wires from top loop (L), chain
(J) (every three links or so), canopy loop (H), canopy loop collar (I), and
canopy (G). Slide canopy loop collar (I) and canopy (G) down onto the
chain/wire.
CONNECTING THE WIRES
6. Have an assistant support the fixture’s weight while completing the
wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
7. Push canopy (G) up to the ceiling and slide canopy loop collar (I) up
beneath the canopy. Tightly thread canopy loop collar (I) onto canopy loop (H)
to secure canopy (G) in place. Lock the nipple (V) into the connector (R2).
Put on the cap (S), bottom cap (W), and the finial (X) until secure. Install
light bulbs (not provided) in accordance with the fixture’s specifications. Do
not exceed the maximum recommended wattage. Your installation is now complete.
Turn on the power and test the fixture.
https://qrco.de/bbv8UC
Get help, quick tips, and explore curated content
@GoldenLighting
@GLFixtures
@GoldenLighting1
@GoldenLighting
GoldenLighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>