KENDAL PF328-8LPA-BLK Circols 8-Light LED Pendant Instructions
- June 13, 2024
- Kendal
Table of Contents
KENDAL PF328-8LPA-BLK Circols 8-Light LED Pendant
Product Information
Product Model: PF328-8LPA-BLK/BRS
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Mounting Instructions
- Attach the mounting plate to junction box with screws provided.
- Before installation to ceiling, adjust fixtures to desired length by pushing wire up into canopy, then coiling up excess wire. Minor adjustment can be made after installation. To lower or lengthen wire, loosen the screw where wire comes out of canopy.
- Insert the button stop with lanyard into one of the slots in the mounting plate and lay it flat so it will not fall back through the hole. This will help take the weight of the fixture while making wiring connections.
- Attach the fixture to the mounting plate with screws provided.
Wiring Instructions
- Line wire (Black) – Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.
- Neutral wire (White) – Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut.
- Ground wire – Connect the GROUND WIRE from junction box to GROUND (or GREEN) with a wire nut.
Adjusting Lights
Due to the light weight aluminum material, it may be necessary to make small adjustments in order to get the individual lights to hang straight. This can be done by making small adjustment turns to the wire where it goes into the canopy.
Dimming Instructions
- This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Recommended dimmers:
- Lutron DVCL-153P
- Lutron CTCL-153P
- Lutron SCL-153P
- Or other compatible LED dimmer controls. Wattage should not exceed 150 watts of product for a 600 watt dimmer.
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
- A.Screws
- B.Mounting plate
- C.Fixture
Parts bag
- Screws 6PCS
- Wire nuts 3PCS
- Screw anchors. 4PCS
INSTALLATION INSTRUCTION
-
Before installation to ceiling,adjust fixtures to desired length by pushing wire up into canopy,then coiling up excess wire, minor adjustment can be made after installation.To lower or lengthen wire,loosen the screw where wire comes out of canopy.
-
Insert the button stop with lanyard into one of the slots in the mounting plate and lay it flat so it will not fall back through the hole. This will help take the weight of the fixture while making wiring connections.
-
Connect the GROUND WIRE from junction box to GROUND (or GREEN) with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut.Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.
-
Attach the fixture to the mounting plate with screws provided.
-
Due to the light weight aluminium material, It may be necessary to make small adjustments in order to get the individual lights to hang straight. This can be done by making small adjustment turns to the wire where it goes into the canopy
-
This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
-
Recommended dimmers:
- Lutron DVCL-153P
- Lutron CTCL-153P
- Lutron SCL-153P
-
Or other compatible LED dimmer controls Wattage should not exceed 150 watts of product for a 600 watt dimmer.
-
FINISH