Kendal PF328-5LBR-BLK Circols 5-Light LED Pendant Instructions
- June 13, 2024
- Kendal
Table of Contents
Kendal PF328-5LBR-BLK Circols 5-Light LED Pendant
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect the power at the circuit breaker or unplug it from the wall outlet before servicing.
Unpack your fixture, you should have the following items
- A.Screws
- B.Mounting plate
- C.Fixture
Parts bag
- Screws 4PCS
- Wire nuts 3PCS
- Screw anchors. 2PCS
-
Attach the mounting plate to the junction box with the screws provided.
-
Before installation to ceiling, adjust fixtures to the desired length by pushing the wire up into the canopy, then coiling up excess wire, minor adjustments can be made after installation. To lower or lengthen the wire, loosen the screw where the wire comes out of the canopy.
-
Connect the GROUND WIRE from junction box to the GROUND (or GREEN) with a wire nut. Connect the NEUTRAL WIRE from the junction box to the NEUTRAL (WHITE) wire from the fixture with a wire nut. Connect the LINE WIRE from the junction box to the LINE (BLACK) wire from the fixture with a wire nut.
-
Attach the fixture to the mounting plate with screws provided.
-
Due to the lightweight aluminum material, It may be necessary to make small adjustments in order to get the individual lights to hang straight. This can be done by making small adjustments to the wire where it goes into the canopy.
This fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
- Lutron DVCL-153P
- Lutron CTCL-153P
- Lutron SCL-153P
Or other compatible LED dimmer controls Wattage should not exceed 150 watts of product for a 600-watt dimmer.