UNITED UWM-6104 Washing Machine User Manual

UNITED UWM-6104 Washing Machine

Product Information

The UWM-6104 is a washing machine manufactured by United Electronics. It is a versatile and efficient appliance designed to meet your laundry needs.

• Model : UWM-6104
• Manufacturer : United Electronics

Product Usage Instructions

Before using the washing machine, please read and follow these instructions:

1. Make sure that the ventilation openings in the base of the washing machine are not obstructed by a carpet. This ensures proper airflow and prevents overheating.

2. Take note of the important notice:

   • The product appearance and specifications may be varied without notice to raise the product quality.
   • The product appearance and specifications may be varied with
     that of the related energy efficiency test or the related safety test, etc.

3. The washing machine offers various programs. The frequently used programs are as follows:

   • Eco40-60
   • Delicate Cotton
   • Cotton

4. Refer to the provided data for reference on program durations and remaining moisture content.

5. Ensure that the washing machine is connected to a suitable power source and water supply.

6. Load your laundry into the drum, making sure not to exceed the maximum load capacity specified by the manufacturer.

7. Select the desired program and adjust any additional settings, such as temperature and spin speed, if applicable.

8. Close the door securely and start the washing machine.

9. Monitor the progress of the washing cycle and wait for it to complete.

10. After the cycle is finished, remove your laundry from the drum.

11. Clean the drum and other parts of the washing machine as instructed in the user manual.

12. For any maintenance or service needs, contact a qualified technician or United Electronics customer support.

For more information and support, visit the official United Electronics website at www.united-electronics.gr.

WARNING

• This appliance is not intended for use by persons(including children)with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. Children of less than 3 years should be kept away unless continuously supervised.
• If the supply cord is damaged. it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• The new hose sets supplied with the appliance are to be used and the old hose sets should not be reused.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices, and other working environments;
  • farmhouses;
  • by clients in hotels, motels, and other residential-type environments;
  • bed and breakfast type environments;
  • areas for communal use in blocks of flats or launderettes.
• For washing machines having ventilation openings in the base, the openings must not be obstructed by a carpet.
• Manual loss, Call our service number.
• Water pressure:0.03-1MPa

CAUTION : To avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Safety Notifications
(Please Must Follow) To prevent harm or damage to the user or the person and property of others, please make sure to follow the safety issues.

Warnings

The risk of electric shock.

1. Please use 220V-240V, above 10A with a ground wire dedicated socket.
2. When inserting and pulling out the power cord please use the plug, please. Don’t use the damaged power cord. When the power cord pin is dirty please wipe it clean with a dry cloth. in time.
3. Do not use the wet hand to insert or pull out the plug.
4. Please pull out the plug when finishing, repairing, or cleaning.

The danger of high-temperature

1. When washing in high temperatures, the door glass will be heated. Please do not touch the door glass, especially children.
2. When opening the door after high-temperature washing, please wait for the temperature to cool down to a safe level and the door will be unlocked automatically.

The danger of injury

1. Do not put any heavy things on the top of the washing machine.
2. If you want to move the machine, please remember to ask for help.
3. Please do not ask unprofessional people to repair the machine.

The danger of explosion

1. Please do not wash clothes that are stained with kerosene, gasoline, or thinner, inflammable goods.
2. Please do not wash when there is gas leakage.

The danger of fire and current leakage

1. Do not allow the washing machine close to the fire, or lighted cigarettes, candles, and volatile materials.
2. Please do not sprinkle the water on the control panel of the washing machine.
3. Please do not put the washing machine outside or in a wet place.
4. Please fix the drain pump and make sure the sewer is unobstructed.

The danger of getting hurt

1. Please handle the carton box after removing it, don’t let the children touch or eat it.
2. Do not allow the children to operate or climb up to the washing machine.
3. Please close the door after use to avoid the children entering the drum.

The danger of damage to the clothes

1. Please do not wash clothes which is waterproof, like Raincoat, feather products, sleeping bags
2. Please wash the clothes which can be washed, if you have any doubt, follow the instructions.

When pulling out the plug, the lock can be unlocked even if there is a lot of water inside. So please check the water level inside before unlocking the door to avoid unnecessary loss.

Attachment specification

Part name

Important notice:

1. The product appearance and specifications may be varied without notice to raise the product quality.
2. The product appearance and specifications may be varied with that of the related energy efficiency test or the related safety test, etc.

Notice :

1. The first use may drain some water out. Its residual water after the performance test, belongs to the normal phenomenon.
2. After each use, please pull the plug and turn off the faucet to prevent accidental flooding or fire.

Installation instruction

• Make sure the temperature of the places where the washer is installed or placed above 0°C or put it outside.
• Place the washer correctly according to management standards and regulations.
• Keep the base of the washer ventilated when it is placed on the ground with carpet.
• There are too many pests in villages. Please keep the surroundings clean because any damages caused by cockroaches or other pests don’t belong to the warranty.

Transport bolt
Washers are installed with transport bolts to prevent internal damage in transit.

Dismantle the transport bolt

1. To prevent internal damage in transit, 4 bolts are installed.
   • Before using the washer, dismantle the bolt (see chart 1 ).
   • If the bolts are not dismantled, violent vibration, noise, and trouble will be caused.
2. Use the attached wrench to loosen the 4 bolts (see chart 2).
3. Twist the bolt rubber slightly and then pull out the bolts, keep the bolts and wrench on standby(see chart 3).
   • The bolts should be remounted no matter when to transport the washer.
4. Use attached stopples to seal the screw holes(see chart 4).

Requires for positions

Horizontal adjustment:

• The slant angle should be less than 1 degree. Power outlet
• The distance between any side of the washer and the power outlet should be within 1.5 meters.
• Don’t use too many electrical appliances in one outlet.

Environment cleaning

• It’s necessary to clean the walls, door, and ground.
• Install the washer on a hard and steady ground with a floor drain rather than a soft blanket or wooden floor.
• Don’t put dirty clothes or some other goods on a washer’s head cover, otherwise, it may impact the normal operation.

Notice

Power connection

1. Don’t use the wiring board or something like that.
2. lf the power lines are damaged, please contact professionals to repair them.
3. After the use of the washer, pull the plug and turn the tap off.
4. Connect the washer with the grounded outlet to correspond to the wiring principles.
5. Place the washer in which is easy to connect the outlet.

• Contact the maintenance center and ask professionals to repair the washer. Laypeople may cause damage and trouble to the washer.
• Don’t put the washer in a place where the temperature is below zero. The pipes will be frozen and break. Moreover, the temperature below zero will damage the programming controller.
• I move the washer in an environment whose temperature is below zero, please keep the washer at room temperature for a few hours before starting it.

Grounding introduction

• A washer must have grounding devices. If trouble happens, the device can reduce the risk of electrical shock. The device is equipped with a cable (including a wire and a grounded plug). The grounded plug must be inserted in an appropriate outlet. If you want to know if the washer is grounded correctly, please contact professional maintenance staff. If the plug can’t match the outlet, please don’t change the plug by yourself.
• Once your washer smokes or emits an odor, please cur the power and contact professional maintenance staff.

Washers should be connected to the water inlet. Please use the attached new plumbing rather than the old one. To ensure the quality, water injection tests are carried out before the washer leaves the factory, so there may be water inside the internal tub, door seals, and normal door panels.

Water inlet connection

1. The pressure of supply water should be between 30kPa and 1000kPa.
2. Don’t abrade the screw thread when connecting the inlet pipes with valves.
3. Please install dropping equipment if the pressure of supply water surpasses 1000kPa.

• Two seals are supplied in the connectors of both ends of the pipe to prevent water leaking.
• Turn on the tap and check if the connectors leak.
• Check the pipes regularly. Please change them if necessary.
• Make sure the pipes don’t be damaged or twine with each other.

The connection of inlet pipes and taps

1. Check the rubber seals on both sides of the hose. -insert a rubber seal into the threaded fittings on each 1 hose to prevent leaking.
2. Connect the water supply hoses to the water faucets tightly by hand and then tighten another 2/3 turn with pliers. Connect the blue hose to a water faucet.
3. After connecting the inlet hose to the water faucets, turn on the water faucets to flush out foreign substances (dirt, sand: or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.
4. Connect the hoses to the water inlet lightly by hand and then tighten another 2/3 turn with pliers.

• Such washing machine is designed for home appliances, please do not install them on the ship, traveling truck, or plane.
• Please turn off the stopcock if long time out of use. ( e.g vacation)
• Please remove the plug and cancel the door lock function to avoid the child locking himself/herself inside.
• Packing materials(e.g. film, foam) could harm a child’s safety and cause asphyxia! Attention: MAKE ALL PACKING MATERIALS OUT OF CHILD REACH.

Install drain-pipe

• Please fix the drain pipe with a lifting rope.
• For the sake of lightening damage of leak towards the ground, please place the drain pipe correctly.
• To avoid siphons, the height of the drain pipe should be between (0.85m-1.25m), moreover, the terminal of it should not be placed in water.
• If the drain pipe is too long, please do not force insert it into the washing machine, which would cause abnormal noise. (Please check the sketch map next page)

The instruction for the installation of pipe

Horizontal Adjustment

• To avoid noise and vibrate by adjusting the washing machine level. place it in the room corner preferably.

• If the ground is not level, please adjust the alignment pins. Do not put wood pieces or something like that, please make sure four alignment pins touch the ground tightly, and the machine is level completely.

• Adjust adjustable feet
  Adjust the adjustable feet to make sure the washing machine is in balance and can be placed on the ground steadily. After settling, screw the locknut to guarantee. Do not place the washing machine on the platform, which is higher than the ground, to prevent the machine from falling because of other accidents.

• The diagonal check
  Applying force downward on the diagonal of the washing machine, the washing machine should not shake. (both diagons need to be checked, if the washing machine shakes, must readjust the adjustable foot.)

Methods of Door Lock and Remove

DOOR LOCK
After operating, the door will be locked automatically, and the “DOOR LOCK” light/picture on the panel will be lit.

Remove Door Lock

• When the “DOOR LOCK” light/picture is lighting, press “Start/pause”, WASHING/DEWATERING drum stops operating. Please wait for about 2 minutes, door lock will be removed automatically.
• Foam overflowing if open the door during operation, please catch the foam with a towel.
• If the temperature is too high, the door can not be opened during operation.
• If the water level is too high, the door can not be opened during operation.

The Usage Method of the Detergent Box

The Recommendations on detergent use at various temperatures

• When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder(heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.
• For washes between 40°C and 60°C, the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or color-fast fabrics with high soiling, while liquid detergents or “color protecting” powders are suitable for colored fabrics with light levels of soiling.
• For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing.

Function Introduction of Operating Panel

The image shown here is indicative only. The actual product you receive may differ.

1. On/Off Button
   • Turn power ON/OFF.
   • When the procedure finishes, press On/Off to cut off power.
2. Start/Pause Button
   • Press it to start operating
   • Press it to pause during operation, and press it again to continue.
3. Pre-Delay Button
   • When using the “Pre Delay” function for washing, the delay time is 3 hours, 6 hours, 9 hours, 12 hours, 15 hours, 18 hours.
   • If want to cancel the Pre Delay function, push one cycle of the “Pre Delay” button.
   • The Pre Delay time means from wash start to wash ending time.
   • You should operate the Pre Delay function after selecting the program and before pushing the button of “start/pause”.
4. Pre Wash Lamp
   • If the clothes are too dirty, you can choose this program before washing them.
   • Press “Pre Delay” for more than 3 seconds to the On/Off Pre Wash function.
5. “Temp.” Button
   • When push the power button to start the machine and select the program, you can choose the proper water temperature according to the material of the clothes.
6. Child-Lock Lamp ©
   • Press it to guard against child operating.
   • Child-Lock operating, other buttons unavailable except ” On/Off”
   • Press “Temp.” for more than 3 Seconds to ON/OFF the Child Lock function.
7. Speed Button
   • When pushing the power button to start the machine and select the program, you can choose different spin speeds.
8. Program Knob
   • Select a program according to the variety and contamination of clothes.
9. Status Indicator
   • Door Lock: This icon indicates the condition of opening and closing of the door lock.
   • Child Lock:   The icon on the upper left is used to control the opening and closing of the child lock, the right side displays the condition of closing of the child lock.

The introduction of function and program

Usage of routine clothes

1. Preparations
   • Open the door put clothes in and close the door.
   • Pull out the detergent box, add detergent, and close the box.
   • Connect the inlet pipes and make sure the tap is turned on.
2. Press the On/Off button
3. The programs can be selected according to requirements.
4. Press The tart/Pause button and begin to wash
5. When all operations are finished, the buzzer emits a noise.
   • Open the door to get clothes out.
   • Unplug and turn off the stopcock.

Cotton Program Introduction
This program is suitable for clothes that are moderately or mildly dirty, like cotton, bedding, underwear, towels, shirts, etc.

1. Preparation for washing
   • Open the door, put on the clothes then close the door
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Cotton” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.
   • When the washing machine washes the towel, the yarn will be squeezed, washing will get a rough surface, using the fiber softening agent, to prevent this kind of phenomenon happens to the greatest extent

Mix Program Introduction
This function can be used to wash mixed clothes like cotton, synthetic, and soon (please do not mix wash the clothes that easily rub off)

1. Prepare for washing
   • Open the door, put on the clothes then close the door
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Mix” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push “the Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset
   • Please separate white or bright-colored clothes from dark clothes.

Eco40-60 Program Introduction

1. Preparation for washing
   • Open the door, put clothes in and close the door.
   • Pull out the detergent box, add detergent, and close the box.
   • Connect the inlet pipes and make sure the tap is turned on.
2. Press the On/Off button and connect to the power
3. Rotate the program button and choose the “Eco40-60”
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Press the Start/Pause button and begin to wash.
5. When the program ends, it will have a humming sound.
   When the washer is working, if you want to change its setting, please press the start/pause button to stop running temporarily and then choose the program you need.

Underwear Program Introduction

Washing underclothes

1. Prepare for washing
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Underwear” program.
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing.
5. When the program ends, it will have a humming sound.
   • When the washer is working, if you want to change its setting, please press the start/pause button to stop running temporarily and then choose the program you need.

Baby Care Program Introduction
This program is to wash infant clothing, allergy people’s clothing, and clothing that needs high-temperature bacteria suppression mites.

1. Prepare for washing
   • Open the door, put on the clothes then close the door.
   • The detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Baby Care” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature; and spin speed.
4. Push the “Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.

Delicate Program Introduction

Washing gauze, silk underclothes

1. Prepare for washing
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Delicate” program.
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing.
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.

Duvet Program Introduction
The clothes have the machine-washable mark, like bedding, bed sheets, curtains, etc

1. Prepare for washing
   • Open the door, put on the clothes then close the door
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Duvet” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, spin speed, and rinse times.
4. Push the “Start/Pause “button to start washing
5. When the program ends. it will have a humming sound.

• If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.
• The electric blanket and carpet cannot be washed. It will damage the machine and clothes).
• Put the clothes in the washing drum properly and uniformly when spinning, to avoid large vibrations and drying time may be extended.
• Heavy clothes cannot be entangled and need to be put inside the washing machine after shaking loose.
• Uneven clothes can lead to not spinning, take out clothes, shake them off, and put them in again.

Synthetic Program Introduction

To wash synthetic clothes

1. Preparation for washing
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Synthetic” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, spin speed, and rand inside times.
4. Push the “Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.
   If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.

Rinse and Spin Program Introduction

The machine will not wash, only rinse and spin.

1. Prepare washing
   • Open the door and put on the clothes then close the door
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Rinse+ Spin” program
   • The washing program will be selected automatically.
4. Push the “Start/Pause “button to start washing.
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting, please push the “Start/Pause” button first and stop washing, then push the “Rinse” and “Spin Speed” buttons to reset.
   • The Spin speed can be selected as the highest, but the temperature cannot be set.

Spin Program Introduction
The machine will not wash and rinse, only spin.

1. Preparation for washing
   • Open the door, put clothes in and close the door.
2. Press the On/Off button and connect to the power
3. Rotate the program button and choose the “Spin”
   • Pressing the “Speed” button can adjust the speed.
4. Press the Start/Pause button
   • Begin to drain away water and spin.
5. When the program ends, it will have a humming sound.
   • If you want to change the current settings during the process of spinning, please push the “Start/Pause” button to stop the washing machine and then push the “spin speed” button to change.
   • During the process of spinning, the actual spinning speed may be inconsistent with the program speed, which is because the washer adjusts the speed according to the balance between clothes.
   • There may be a rhythmic drone during spinning, which is the normal voice of a drain bump rather than the machine’s fault.

Tub Clean Program Introduction

1. Preparation for washing
   • Please make sure nothing is in the tub before cleaning.
   • Open the distribution box, and add the liquid bleach to the main box.
   • Don’t add detergent or laundry detergent to prevent causing too much foam.
   • Close the distribution box.
   • Please make sure the inlet pipes are connected well and the tap is turned on.
2. Press the On/Off button and connect to the power
3. Rotate the program button and choose “Tub Clean”
4. Press the Start/Pause button.
   • The programs begin to operate after the door is locked.
5. When all operations are finished, the buzzer emits a noise.
   • After finishing the program, dry the inside part of the machine to prevent the door from distorting.
   • If there are children at home, please don’t open the door for too much time.

Wool Program Introduction
Wash wool fiber texture, such as machine washable wool fabrics, etc.

1. Prepare for washing
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Wool” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature. spin speed
4. Push the “Start/Pause “button to start washing temperature, dewatering speed, and appointment time.
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.
   • After washing is completed, take the clothes in time, drying, and after shaking loose plastic deformation to avoid placing time being too long.
   • Please separate white or bright-colored clothes from dark clothes for washing.
   • Using special wool detergent can reduce clothing damage, and improve the washing effect.

Down Jacket Program Introduction
Washing down fill clothing.

1. Prepare for washing
   • Open the door, put on the clothes then close the door
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Down Jacket” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.
   If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.

Sports Program Introduction
Wash the machine- washable sports clothes

1. Prepare for washing
   • Open the door, put on the clothes then close the door
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Sports” program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.

Quick 42′ Program Introduction

To wash clothes that are changed frequently, not too dirty and thin clothes

1. Prepare for washing.
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose “Quick 42″‘ program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing.
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.
   • To ensure the washing effect, washing is suitable for the washing capacity under 4 kg.

Quick 15′ Program Introduction
To wash clothes that are changed frequently, not too dirty and thin clothes

1. Prepare for washing.
   • Open the door, put on the clothes then close the door.
   • Take the detergent box and add detergent then close it.
   • Connect the water inlet pipe well and make sure the faucet is running.
2. Press the On/Off button and connect to the power
3. Turn the program button to choose the “Quick 15′ program
   • The washing program will be selected automatically.
   • Choose the needed water temperature, and spin speed.
4. Push the “Start/Pause “button to start washing.
5. When the program ends, it will have a humming sound.
   • If you want to change the current setting during the process of washing, please push the “Start/Pause” button first and stop washing, then push the button to reset.
   • To ensure the washing effect, washing is suitable for the washing capacity under 2 kg.

Introduction of Washing Programs

• The eco 40-60 program can clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and this program is used to assess compliance with the EU ecodesign legislation;
• The most efficient programs in terms of energy consumption are generally those that perform at lower temperatures and longer duration;
• The household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective programs will contribute to energy and water savings;
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content
• How to find the model information stored in the product database, as defined in Regulation (EU) 2019/2014 using a web link that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product
• You can check the manual and the QR code on the energy efficiency label.

 |  |  |
---|---|---|---

Cotton

|

cold (20′ C, 4CYC,60′ C, 90 “C)

|

800(0, 400, 1000)

|

54

Mix

|

cold (20′ C,40°C)

|

800(0 , 400)

|

60

Eco40-60

|

40′ C (cold,20′ C,60′ C)

|

1000(0 , 400 , 800)

|

198

Underwear

|

2 ·c ( cold,40′ C)

|

800(0 , 400)

|

59

Baby Care

|

60′ C (40′ C, 90′ C)

|

800(0 , 400, 1000)

|

126

Delicate

|

2 ·c (cold,40 “C)

|

800(0, 400)

|

48

Duvet

|

40′ C (cold, 20′ C)

|

800(0, 400)

|

68

Synthetic

| 4 ·  c  (cold, w e ,60 °C)|

800(0 , 400, 1000)

|

67

Quick 15′

|

cold (20′ C,40°C)

|

800(0 , 400)

|

15

Quick 42′

|

2 ·c (cold,40′ C)

|

800(0 , 400)

|

42

Sports

|

cold (20′ C,40°C)

|

800(0 , 400)

|

44

Down Jacket

|

40′ C (cold, 20′ C)

|

800(0, 400)

|

58

Wool

|

40 ‘C (cold, 20’ C)

|

800(0, 400)

|

47

Tub Clean

|

60′ C

|

800

|

75

Spin

|  |

800(0, 400, 1000)

|

10

Rinse+Spin

|  |

800(0 , 400, 1000)

|

16

Instruction:

1. The needed time canbe changed due to water pressure, drain condition, clothing textile, weight, and water temperature changes.
2. During the process of washing, the time of washing and spinning will be different from the real running time.
3. During the process of washing, the real display time will beat according to sensing the weight changing of clothing.
4. Due to the different weights of clothing and detergent, if the spin speed is too low, the rinse performance will not be good, please increase the times of rinse.
5. The data in the chart can be different from different models.
6. When editing the default program as an energy efficiency program, washing time will increase automatically.

Maintenance

• Please maintain the washing machine to extend service life.
• Before maintenance, please unplug.

Body of washing machine
After washing, please clean it with a soft cloth. If much contamination please use the appropriate detergent or soap.

• Do not water directly.
• Do not use putty powder, diluent, gasoline, or alcohol to clean the machine body.

Door Gasket Ring
After washing, please remove contamination, wastepaper and so on, if foreign matter exists, please remove it.

The Clearance of Detergent Box
Please clean the detergent box regularly. Pall it out and wash it with clean water, then insert it back.

The Clearance of Universal Coupling
( Suggest: Once/ half year)

• If waste accumulates, it will influence water inlet speed.
  1. Take off the soft pipe from the connecting part side.
  2. Take off the screwing device according to the arrow shown.
  3. Wash the inside of the screwing device.
  4. Install the cleaned crewing device with the inlet soft pipe.

The clearance of the inlet water valve
( Suggest: Once/ half year)

1. Take off the soft pipe from the washing machine side.
2. Take off the filter net from the water valve.
3. Clean the filter net with a toothbrush.
4. Install the soft inlet pipe.

Maintenance
When the washing machine is frozen

1. Cover the stopcock and connecting part with a hot towel.
2. Take off the inlet pipe, and put it into 50-degree water.
3. Pour into the drum about 2-3L of 50-degree water.
4. Connect the inlet pipe, turn on the stopcock, and start the washing machine, please check whether the inlet and outlet are normal.

The Clearance of dewatering-pump filter
( Suggest: once/month)

1. Press the fastener on the pump after dewatering power it off, and open the lid of the water pump filter. (Attention: if hot water is inside, please go ahead after it is cold.)
2. Take off the filter anti-anticlockwise.
3. Wash the filter.
4. Direct at the pump and insert the filter, tighten it clockwise, and tighten the lid.
   • Attention:
   • Please tighten the filter well to avoid a leak.
   • Please do not clean during operation.

The Drum Clearance
(Suggest once/month)
After using it for a period, some dirt may exist. You can clean the inside and outside of the drum by operating the drum procedure.

Attention : please do not put cloths and detergent when clearing the drum.

Varieties of Functions

Child lock

| Statement| To avoid child misplay
Setup to remove| During operation, press Temp. for more than 3 seconds, please unplug and or press Temp. to remove Child Lock
intellectual lock-remove| ****

Statement

| When the operation is over, if the water inside is higher, the drain water pump is on to drain to the open lock water level and stop.
Compensation of power-off| Statement| When power is connected after power is off, the time point will continue from the previous stop time point.
Door self-lock| Statement| After selecting the procedure, the door locked automatically, and about 2 minutes after the operation was over, the lock was removed.
Clearance of the drum| Statement| To remove waste and germs, please sterilize to clean the drum.

Delay

| ****

Statement

| Press Pre Delay to select the time of washing, the washing machine can make pre-delay 3 hours, rs  6 hours, rs  9 hours,s 12 hours,s 15 hours,s 18 hours.

Notice before Washing

Washing guide identification

• Please check the cloth washing guide identification, which shows the cloth’s texture and washing method.

Classification washing

• Please wash cloth of the same texture, different textures, different water temperatures, speed, and washing procedure, please split deep colored cloths from white cloths. Split-dyed cloths from cotton, otherwise, the white cloths would be discolored. If possible, please do not wash highly contaminated clothes with clean ones together.
• The degree of pollution (serious, moderate, slight) classify clothes and wash according to the degree.
• color (white, light color, deep color) classify them and wash them.
• velveteen  (easy to fall off, easy to adhere) to classify the white and the deep color.

Notes

• When putting big and small clothes together, put the big first and they have to be less than half of the total clothes. Please don’t wash a single cloth because it may cause trouble or imbalance. Please add one or two similar clothes.
• Small clothes like silk stockings and handkerchiefs should be put into mesh bags to wash. Before washing the bra with steel rings, please take the rings off. If it is inconvenient to do this, please put them into mesh bags to prevent the bra from slipping into the gap between the internal and external tubs.
• Check all pockets and make sure nothing is in them. Nails, hairpins, matches, pens, coins, and keys will damage your washer and clothes.
• Zip up all clothes, fix the button and hook, and tie the loose belt, making sure that other clothes cannot be damaged by them.
• Firstly use a tater with a little detergent to wash the parts with too many stains, such as collars and cuffs, which can make the clothes cleaner.
• Check the door seals and make sure nothing on them.
• Make sure there is nothing in the tub before washing.
• Please use the low bubble detergent, especially for front-loading washing to wash the clothes.

Non-fault conditions

Troubleshooting Guide

Phenomenon

| Indicator light state| ****

checkpoints

| ****

solutions

---|---|---|---
Child Loci<| 3H| 6H| 9H

Waterinfiow

| ****

flash

| ****

light

| ****

quench

| ****

quench

| •  Check if turning the tap off.

•  Is the water supply cut off or is the water

pressure too low?

•  Are the water inlet pipes frozen?

•  Are the filters blocked?

| Open the stopcock. Please wait.

Use hot water to unfreeze the pipes. Take out the filters and clean them.

Water outflow

| ****

flash

| ****

quench

| ****

light

| ****

quench

| •  Are the outlet pipes placed too high?

•  Are the outlet pipes frozen?

• Are the outlet pipes blocked?

•  Are the floor drains blocked?

| Please put away the outlet pipes and make sure the height is within 1M. Use hot water to unfreeze the pipes. Take out the foreign matter and dredge the pipes.

Clean the floor drain.

Door trouble

| ****

flash

| ****

quench

| ****

quench

| ****

light

| ****

•   Make sure to start the washer without closing the door well.

| ****

Make sure the door is truly closed

Spin trouble

| ****

flash

| ****

light

| ****

quench

| ****

light

| •  Check if disassemble the carriage bolt.

•  Is the machine placed steadily?

•  Are the clothes too small or light?

•  Are the locknuts on under the feet tightened up?

| Disassemble the carriage bolt.

Place the machine on a steady ground. Add more clothes.

Tighten up the locknuts.

Continuous water| ****

flash

| ****

light

| ****

light

| ****

quench

| ****

Close the stopcock, pull the plug and, entrust the after-sales service.

when the wash tub doesn’t rotate.| flash| quench| quench| quench| Close the stopcock, pull the plug and, entrust the after-sales service.

Too much foam

| ****

•  Check if add too much detergent.

| Add a reasonable amount of detergent. Use the detergent correctly.

Specification

The introduction of frequently-used programs
The following data is just for reference only.

NOTE:

1. The energy efficiency rating was tested under the “ECO 40-60” procedure.
2. Scan the QR code shown on the energy label for further product information.
3. When the washing machine gives error codes, make sure you contact our after-sales team to repair it. We shall not be responsible for any issue caused by unauthorized repair.
4. In case you need to order the accessories, we can send them out within 15 working days after the request.
5. To improve the performance of the whole washing machine, the appearance and specifications shall be changed without additional notice.

Product  Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2014 about energy labeling of household washing machines and household washer-dryers

Supplier’s name or trademark : UNITED
Supplier’s address: After sales department, November Str. 17 87A, 55535 Thessaloniki, EL
Model identifier: UWM-6104
General product parameters:
Parameter| Value| Parameter| Value
Rated capacity (kg)| 6,0| Dimensions in cm| Height| 85
Width| 60
Depth| 44
Energy    Efficiency

index(EEl w)

| 90,1| Energy efficiency class| E
Washing efficiency index1| 1,031| Rinsing effectiveness (g/kg)| 5,0
Energy consumption tion in kWh per cycle,  based on the eco 40-60 pro­ gram at a combination of full and partial loads. Actu­ al energy consumption will depend on how the appliance

is used.

| 0,730| Water consumption in liter per cycle, based on the eco 40-60 program at a combination of full and partial loads. Actu­ al water consumption will depend on how the appliance is used and on the hardness of the water.| 43
Maximum temper­ nature inside the treated textile (·c)| Rated

capacity

| 45| Weighted remaining moisture content (%)| 62,0
Half| 40
Quarter| 40
Spin speed) (rpm)| Rated

capacity

| 1000| Spin-drying efficiency class| C
Half| 1000
Quarter| 1000
Programme dura­ tion1 (h:min)| Rated

capacity

| 3:18| Type| Free-standing
Half| 2:36
Quarter| 2:36
Airborne acousti­ cal noise emissions in the spinning phase (dB(A) pW)| 74| Airborne acoustical noise emission class (spinning phase)| B
Off-mode (W) (if applicable)| 0,50| Standby mode (W) (if applica­ be)| N/A
---|---|---|---
Delay start (W) (if applicable)| 4,00| Networked standby (W) (if ap­ applicable)| N/A
Minimum duration of the guarantee offered by the supplier: 24 months
This product has been designed to release silver

ions during the washing cycle

| NO
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: www.united- electronics.gr

• for the eco 40-60 program

Environmental protection
Correct Disposal of this product This marking indicates that this product should not be disp. used with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental sofa refueling

DECLARATION OF CONFORMITY
Herewith, we state that this product complies with the requirements of below directives:

• EMC-Directive: 14 / 30 / EU
• Low Voltage Directive: 14/ 35 / EU
• ErP Directive 09 / 125 / EC
• CE Marking: 93 / 68 / EEC
• RoHS Directive: 11 / 65 / EU & Delegated Directive (EU) 15 / 863

The detailed declaration of conformity can be found at www.united- electronics.gr

IMPORTER:
Kalliopi Karyda & Co, LP 87A, 17th November str. 55535, Plea, Thessaloniki Tel. 2316 006600 Fax. 2316 006650 www.united- electronics.gr

References

• UNITED - Αμοιρίδης Σαββίδης ΑΕ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>