UNITED UWM-6105 Washing Machine User Manual

June 1, 2024
UNITED

UWM-6105 Washing Machine

“`html

Specifications

  • Model: UWM-6105
  • Power Supply: 220-240V~,50Hz 10A
  • MAX. Current: 10A
  • Standard Water Pressure: 0.05MPa~1MPa
  • Washing Capacity: 6.0 kg
  • Dimensions: 595mm x 850mm x 435mm
  • Weight: 52kg
  • Rated Power: 2000W
  • Reference Dimension: 440mm x 400mm x 900mm x
    156mm

Product Overview

The UWM-6105 model features the following components:

  1. Door
  2. Detergent dispenser
  3. Control panel
  4. Drain hose
  5. Power supply cord
  6. Service flap

Note: The product image is for illustration purposes only.
Please refer to the actual product for reference.

Quick Start Guide

Before Washing

  1. Plug in the unit and ensure proper earth terminal
    connection.

  2. Open the tap for water supply.

  3. Load the laundry into the machine.

  4. Close the door securely.

  5. Add detergent and softener as needed.

Washing

  1. Select the desired washing program.
  2. Select additional functions or maintain default settings.
  3. Press the Start/Pause button to initiate the program.

Note: Ensure to follow detergent compartment guidelines
based on selected functions. Buzzer will sound upon program
completion.

Frequently Asked Questions (FAQ)

Q: What should I do if the machine shows an error code during

operation?

A: If an error code is displayed, refer to the Troubleshooting
section in the manual for guidance on resolving common issues. If
the problem persists, contact customer support for assistance.

Q: Can I use bleach in this washing machine?

A: It is recommended to avoid using bleach in this washing
machine as it may damage the appliance components. Stick to using
appropriate detergents and fabric softeners for optimal
performance.

Q: How often should I clean the detergent dispenser?

A: Regularly clean the detergent dispenser after every few wash
cycles to prevent residue buildup. Follow the Cleaning and
Maintenance instructions provided in the manual for detailed
cleaning procedures.

“`

UWM-6105
Please read this Instruction manual carefully before using your unit for the first time and keep it for any future reference.

THANK YOU LETTER Thank you for choosing UNITED! Before using your new UNITED product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

CONTENTS

THANK YOU LETTER

01

SAFETY INSTRUCTIONS

02

SPECIFICATIONS

06

PRODUCT OVERVIEW

07

QUICK START GUIDE

08

PRODUCT INSTALLATION

10

OPERATION INSTRUCTIONS

14

CLEANING AND MAINTENANCE

25

TROUBLE SHOOTING

29

DISPOSAL AND RECYCLING

30

GENERAL PRECAUTIONS

31

Readallinstructionsandexplanations before use.Follow the instructions carefully. Keep the operation instructions handy for later use. if the appliance is sold or passed on then ensure that the new owner always receives these operation instructions.
01

SAFETY INSTRUCTIONS
Intended Use
The product is intended only for home use and for textiles in household amounts suitable for washing. This appliance is for indoor use only and not intended for built in use. Only use according to these instructions. The appliance is not intended for commercial use. Any other use is considered as improper use. The producer is not responsible for any damage or injury that may result from it. This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments; – Farm houses; – By clients in hotels, motels and other residential type environments; – Bed and breakfast type environments; – Areas for communal use in blocks of flats or in launderettes.
Explanation of Symbols
DANGER This symbol indicates that there are dangers to the life and health of persons due to extremely flammable gas.
WARNING OF ELECTRICAL VOLTAGE This symbol indicates that there is a danger to life and health of persons due to voltage. WARNING The signal word indicates a hazard with a medium level of risk which, if not avoided, may result in death or serious injury.
CAUTION The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in minor or moderate injury.
NOTE The signal word indicates important information (e.g. damage to property), but not danger.
OBSERVE INSTRUCTIONS This symbol indicates that a service technician should only operate and maintain this appliance in accordance with the operating instructions.
Please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or explosion, electric shock and to prevent property damage, personal injury or loss of life. Failing to follow these instructions shall void any warranty. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
02

WARNING: Electric Shock Hazard
· If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
· If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
· Risk of electric shock! · The appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. · Children should be supervised that they do not play with the appliance. · Children 3 years and under shall be kept away from the appliance or continuously supervised. · Animals and children may climb into the machine. Check the machine before every operation. · Do not climb or sit on the appliance.
Installation Location and Surrounding
· All washing and additional substances are to be kept in a safe place out of the reach of children. · Do not install the machine on a carpet floor. · The obstruction of the openings by a carpet can damage the machine. · Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber
parts to corrode. · Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In
case of water leakage or water splashes, let the appliance dry in the open air. · The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge
on the opposite side to that of the machine . · Do not operate the machine in rooms with a temperature of below 5°C. This can cause damages
to parts of it. If it is unavoidable, make sure to drain the water completely from the appliance after every use (see”Maintenance – Cleaning of drain pump filter”) to avoid damages caused by frost. · Never use flammable sprays or substances in the immediate proximity of the appliance.
Installation
· Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
· This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
· Mains plug must be accessible after installation. · Before washing clothes for the first time, the product shall be operated once throughout all the
procedures without any clothes inside. · Before using the machine, the product shall be calibrated. · Do not put any excessively heavy objects on the appliance, like water containers or heating
devices.
03

SAFETY INSTRUCTIONS
· The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
· Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.
Electrical Connection
· Make sure the supply cable is not trapped by the machine, or it can get damaged. · Connect the product to a grounded outlet protected by a fuse complying with the values in the
“Technical specifications” table. The grounding installation has to be made by a qualified electrician. Ensure that the machine is installed in accordance with the local regulations. · Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.
WARNING:
· Don´t use multiple plugs or extension cords. · The appliance must not have an external switching device such as a timer or connected to a
circuit that is regularly switched on and off. · Do not pull the plug out of the mains outlet if there is flammable gas around. · Never pull out power plug with wet hands. · Always pull at the plug, not at the cable. · Always unplug the appliance if it is not being used.
Water Connections
· Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak, close the water tap and get it repaired.
· Do not use the appliance before the pipes and hoses are installed properly by qualified persons. · Glass door may become very hot during the operation. Keep children and pets far away from the
machine while it is operating. · The water inlet and outlet hoses have to be safely installed and remain undamaged. · Otherwise, water leakage can occur. · Do not remove the drain pump filter while there is still water in the appliance. Big quantities of
water can leak out, and there is a risk of scalding due to hot water.
Operation and Maintenance
· Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
· Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
· Remove all objects from pockets such as lighters and matches before use the appliance. Thoroughly rinse items that have been washed by hand.
04

· Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
· Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be washed in the machine.
· Fabric softeners or similar products should be used are recommended in their instructions. · Never try to open the door forcefully. · The door will unlock shortly after the end of a cycle. · Please do not close the door with excessive force. If it is found difficult to close the door, please
check if the clothes are properly inserted and distributed. · Always unplug the appliance and close the water tap before cleaning and maintenance and after
each use. · Never pour water over the appliance for cleaning purpose. Risk of electric shock! · Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard. · The producer will not be responsible for damages caused by the intervention of not authorized
persons.

Transport
· Before Transport: -Bolts shall be reinstalled to the machine by a specialized person; -Accumulated water shall be drained out of the machine.
· This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle.

Model UWM-6105

Washing Capacity 6kg

05

SPECIFICATIONS

A

C

G

B

Model
Power Supply MAX. Current Standard Water Pressure Washing Capacity Dimension A B C Weight Rated Power Reference Dimension D E F G

D E
F
UWM-6105
220-240V~,50Hz 10A
0.05MPa~1MPa 6.0 kg
595mm 850mm 435mm
52kg 2000W
440mm 400mm 900mm 156mm 06

PRODUCT OVERVIEW
3 2
4
1 5

6

1 Door 2 Detergent dispenser 3 Control panel

4 Drain hose 5 Power supply cord 6 Service flap

NOTE The product picture is for illustration only, please refer to real product as reference.

Accessories
4 x Cover caps

1 x Supply hose cold water

1 x Owner’s manual

Acoustic sponge (optional)

07

QUICK START GUIDE

CAUTION

· Before washing, please make sure the machine is installed properly. · Your appliance was thoroughly checked before it left the factory. To remove any residual water
and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, recommended to clean the inner drum by running the “Drum Clean” or other program with the optional temperature of 90 °C. Be careful not to put laundry and detergent in the machine.

1. Before Washing

1. Plug in

2. Open tap

3. Load

earth terminal

4. Close door

5. Add detergent
Mwaasinh

Softener
I
Prewash

NOTE Detergent need to be added in compartment I if the pre-wash function is selected.

08

2. Washing
1. Select programme

2. Select function or remain default settings

3. Press Start/Pause to start the program

NOTE 1. If default is selected, step 2 can be skipped. 2. The function button line chart is for reference only, please refer to real product
as standard. 3. After Washing Buzzer beep.
09

PRODUCT INSTALLATION
Tools Needed If Installation By Yourself (not include)
Installation Area
WARNING · Stability is important to prevent the product from wandering! · Make sure the machine is standing leveled and stable. · Make sure that the product does not stand onto the power cord. · Make sure to maintain the minimum distances from the walls as shown in the picture.

w

w

W> 20mm

Before installing the machine, the location characterized as follows shall be selected: 1. Rigid, dry, and level surface. 2.Avoid direct sunlight. 3.Sufficient ventilation. 4.Room temperature is above 5 °C . 5.Keep far away from the heat sources such as coal or gas burning appliances.

10

Unpacking the Machine

WARNING
· Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
· There is a risk of suffocation ! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing. 2. Lift the machine and remove the base packaging. 3. Remove the tape securing the power supply cord and drain hose. 4. Remove the inlet hose from the drum.

Remove Transport Bolts
WARNING You must remove the transport bolts from the backside before using the product.

1. Loosen the 4 transport bolts with a spanner.

2. Remove the bolts including the rubber parts and keep them for future use.

3. Close the holes using the cover caps.

11

PRODUCT INSTALLATION
Levelling the Machine
WARNING The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut. 2. Turn the foot until it reaches the floor. 3. Adjust the legs and lock the nuts with a spanner.
Make sure the machine is level using a spirit level.
Connect the Water Supply Hose
WARNING To prevent leakage or water damage, follow the instructions in this chapter. · Do not kink, crush or modify water inlet hose.
Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.
NOTE · Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
WARNING · Do not kink or protract the drain hose. · Position drain hose properly ,otherwise damage might result in water leakage. · It is not allowed to remove the buckle of drain pipe.
12

There are two ways to place the end of drain hose:

1.Put it into the water trough.

2.Connect it to the branch drain pipe of the trough.

Max. 100cm Min. 60cm Max. 100cm Min. 60cm Max. 100cm Min. 60cm

Water trough
Acoustic Sponge NOTE
· Please make sure to assemble the acoustic sponges, which can effectively reduce the noise caused by the machine while working, in order to provide you with a more peaceful and quiet living environment.

2x 2x
1. Get the machine laid on the floor, using some soft material like foam or clothes between the machine and floor for a protection;
2. Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter sponges to the shorter bottom edges.

13

OPERATION INSTRUCTIONS
Before Each Washing
· The ambient temperature of the machine should be 5°C-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
· Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming or less-foaming detergent suitable for machine properly.

1. Take all items out of the pockets

2. Sort laundry according to color and textile type

3. Tie together long textile strips and belts, close zips and button

4. Put small items into a laundry bag

WARNING · Do not wash articles that have been cleaned in, washed in, soaked in, or dabbed with
combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials. · Washing single clothes items may easily create big eccentricity. Therefore it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly. · Do not wash, spin water-proof seats, mats ,or clothing.
14

Detergent Dispenser

IPre wash Main wash
Softener
Release button to pull out the dispenser

I

CAUTION
· Detergent only need to be added in “compartment I “after selecting pre-wash function. · Do not put laundry beads into the detergent dispenser.

Programme
Cotton 30°C Cotton 40°C Cotton 60°C Cotton 90°C Synthetic Synthetic 40°C Drum Clean Cold Wash Cold Wash 20°C Spin Only Steam Wash Rinse&Spin
Means must

Programme
Delicate 30°C Delicate Ends in 9H Ends in 6H Ends in 3H Quick Wash 45′ Quick Wash 30′ Quick Wash 15′ ECO 40-60 Cotton Intensive 40°C Cotton Intensive 60°C
Means optional

15

OPERATION INSTRUCTIONS

Detergent Recommendation

Recommended washing detergent Heavy-duty detergent with bleaching agents and optical brighteners Colour detergent without bleaching agent and optical brighteners Color or mild detergent without optical brighteners Mild washing detergent

Type of laundry and textile
White laundry made from boil-proof cotton or linen Coloured laundry made from cotton or linen Coloured laundry made from easy care fibres or synthetic materials Delicate textiles, silk, viscose

Wash cycles
Cotton,ECO 40-60 Cotton,ECO40-60, Cold Wash
Cold Wash, Synthetic Synthetic

Washing temp. 30/40 /60/90 Cold/20/ 30/40/60 /90 Cold/20/ 40 Cold /40

NOTE
· Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the detergent dispenser, to avoid its inlet to get blocked and thus cause a water overflow.
· Please choose the suitable type of detergent to get a maximum of washing performance and a minimum of water and energy consumption.
· To achieve the best cleaning result a proper detergent dosing is important. · Use a reduced detergent amount if the drum is not filled completely. · Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less
detergent. · Dose according to how dirty your laundry is, less dirty clothes require less detergent. · Highly concentrated (compact detergent) requires particularly accurate dosing.
Following symptoms are a sign of detergent overdosing: – heavy foam formation – poor washing and rinsing result
Following symptoms are a sign of detergent under dosing: – laundry turns grey – built-up of limescale deposits on the drum, the heating element and/or the laundry

16

Control Panel

1

4

3

2

11 OFF Turn the appliance on and off.
2 Start/Pause Start or pause your programme.
3 Option This allows you to select additional functions and will light when selected.

41 Programmes Available according to the laundry type.

17

Programmes
Model: UWM-6105
Synthetic Synthetic 40 Cold Wash Cold Wash 20 Cotton 30 Cotton 40 Cotton 60 Cotton 90 ECO 40-60 Cotton Intensive 40 Cotton Intensive 60 Drum Clean Spin Only Steam Wash Rinse&Spin Delicate 30 Delicate Ends in 9H Ends in 6H Ends in 3H Quick Wash 45′ Quick Wash 30′ Quick Wash 15′

Display Time / hrs

6.0

6.0

3.0

2:20

3.0

2:20

6.0

1:00

6.0

1:01

6.0

2:40

6.0

2:40

6.0

2:45

6.0

2:50

6.0

3:18

6.0

3:48

6.0

3:53

1:18

6.0

0:12

3.0

1:27

6.0

0:20

2.5

0:50

2.5

0:48

6.0

0:59

6.0

0:59

6.0

0:59

2.0

0:45

2.0

0:30

2.0

0:15

NOTE
· The parameters in this table are only for user’s reference. The actual parameters maybe different with the parameters in above mentioned table.
18

Programmes

UWM-6105

Nominal capacity in kg Temperature setting Cycle duration in h:min Energy consumption in kWh/cycle Water consumption in L/cycle Highest washing temperature °C1) Residual moisture in %/ Spin speed2)

Cycle

Cold Wash 20°C Cotton 60°C Synthetic Quick Wash 15′ Cotton Intensive 40°C
ECO 40-603)

3.0

20 1:01

6.0

60 2:45

3.0 Cold 2:20

2.0 Cold 0:15

6.0

40 3:48

6.0

­ 3:18

3.0

­ 2:36

1.5

­ 2:36

0.207 1.280 0.327 0.035 1.085 0.862
0.540
0.369

37 58 55 32 58 50.5
38.0
35.0

20 60 Cold Cold 40 41
34
27

65%/1000 70%/1000
65%/1000 75%/800 65%/1000 62.9%/1000
62.9%/1000
62.9%/1000

· The above data is for reference only, and the data may change due to different actual use conditions.
· The values given for programmes other than the ECO 40-60 programme are indicative only.
· Cold Wash 20°C is able to clean lightly soiled cotton laundry, at a nominal temperature of 20 °C,which complies with the regulation (EU) 2019/2023.
· Concerning to EN 60456:2016+A11:2020 With(EU) 2019/2014, (EU) 2019/2023, (EU) 2021/340, (EU) 2021/341. The EU energy efficiency class is: D Energy test program: ECO 40-60. Other as the default. Half load for 6.0kg machine:3.0kg. Quarter load for 6.0kg machine:1.5kg.

19

Programmes

  1. The highest temperature reached by the laundry in the wash cycle for at least 5 minutes. 2) Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved. 3) The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration. Loading the household washing machine up to the capacity indicated for the respective programmes will contribute to energy and water savings. Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
    CAUTION · If there is any break in the power supply while the machine is operating, a special
    memory stores the selected programme. The machine will continue the programme when the power supply is re-established.
    20

OPERATION INSTRUCTIONS

Programmes are available according to the laundry type.

Programmes

Synthetic
Cold Wash Cotton ECO 40-60 Cotton Intensive Drum Clean
Steam Wash Spin Only Rinse & Spin Delicate Ends in Quick Wash

Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles. Cold water to wash clothes. Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle. To increase the washing effects, washing time is increased. It applys 90 °C high temperature sterilization to make the clothes washing more green. When this procedure is performed, the clothes or other washing cannot be added. When proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this programme regularly according to the need. TheSteamWashcandeeplypenetratethefiber, whicheffectively eliminatebacteriasandgerms, preventingodorsandprotectinghealth. Spins and drains the water. Rinses and then spins the laundry, and then drains the water. Fordelicate,washabletextiles, e.g.made ofsilk, satin, syntheticfibres or blended fabrics. The function can be set with this programme,the total time including washing time and delaying time is 3h,6h or 9h. It is suitable for washing few and not very dirty clothes quickly. The washing time is 15′, 30′ or 45′.

NOTE · Reference to your product to select the programmes.
21

OPERATION INSTRUCTIONS
Option

Cycle
Synthetic Synthetic 40 Cold Wash Cold Wash 20 Cotton 30 Cotton 40 Cotton 60 Cotton 90 ECO 40-60 Cotton Intensive 40 Cotton Intensive 60 Drum Clean Spin Only Steam Wash Rinse &Spin Delicate 30 Delicate Ends in 3H/6H/9H Quick Wash 45′ Quick Wash 30′ Quick Wash 15′

Default Temp.()
Cold 40 Cold 20 30 40 60 90 -40 60 90 40 30 Cold 40 40 30 Cold

Default spin speed (rpm)
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
-1000 1000 1000 600 600 1000 800 800 800

Additional functions
Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse,No Spin Pre Wash,Extra Rinse ,No Spin
No Spin No Spin
No Spin Extra Rinse,No Spin Extra Rinse,No Spin Extra Rinse,No Spin Extra Rinse,No Spin
No Spin No Spin No Spin

NOTE · For the maximum spin speed, program time, and other details of the ECO 40-60
program, please refer to the content on the Product Fiche page. · The table shows which cycle offers which options for adjustment. If an adjustment is not possible
for a cycle.

22

Prewash: The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it. ExtraRinse: The laundry will undergo extra rinse once after you select it.
No Spin: It will not spin if you choose this function.
Mute the buzzer

Prewash Press 3 sec.

ChoosetheProgramme

Press the [Prewash]button for 3sec.the buzzer is mute.

To act the buzzer function, press the button again for 3 seconds. The setting will

be kept until the next reset.

CAUTION · After Muting the buzzer function, the sounds will not be activated any more.

ChildLock To avoid mis operation by children.

Pause Start

Extra Rinse

No Spin

Choosethe Programme

Start

Press [Extra Rinse] and [No Spin] 3 sec. till buzzer beep.

CAUTION

· Only press and hold the two buttons can release “Child Lock”, even power off, switch off and program end, the “Child Lock” will lock all buttons except power button and “Child Lock” button.
· Please release “Child Lock” before selecting program and starting washing.

NOTE Usage counter 1. Unplug the equipment for 10s and reconnect again. 2.Power on and within 10s, please press ” Prewash” and “No Spin” on control panel
simultaneously and continuously for around 5s until the buzzer beep. 3. The number of times the light flashes represents an Arabic digit, for example, the usage count of
equipment is 3456, “Prewash” flashes 3 times; “Extra Rinse” flashes 4 times; “No Spin” flashes 5 times; “Pause/Start” flashes 6 times. 4.Repeat step 1 again and customer can resume to normal operation.
23

Product Fiche

Supplier’s name or trade mark(a),(c): UNITED

Supplier’s address(a),(c): 87A, 17th November str., 55535, Pylea, Greece

Model identifier(a): UWM-6105

General product parameters:

Parameter

Value

Parameter

Rated capacity(b)(kg)

6.0

Dimensions in cm(a),(c)

Value

Height

85

Width

60

Depth

40

Energy efficiency index(b) (EEIw)

79.5

Energy efficiency class(b)

D (d)

Washing efficiency index(b)

1.031

Rinsing effectiveness (g/kg)(b)

5.0

Energy consumption in kWh per cycle, based on the eco 40-60 programme at a combination of full and partial loads. Actual energy consumption will depend on how the appliance is used.

.0 644

Rated

Maximum temperature inside the treatecdapacity

textile (b)()

Half

Quarter

Spin speed(b)(rpm)

Rated capacity

Half

Quarter

41 34 27
1000 1000 1000

Programme duration(b)(h:min)
Airborne acoustical noise emissions in the spinning phase(b) (dB(A) re l pW)

Rated capacity

3:18

Half

2:36

Quarter

2:36

79

Off-mode (W) (if applicable)

0.50

Delay start (W) (if applicable)

4.00

Water consumption in litre per cycle, based on the eco 40-60 programme at a combination of full and partial loads. Actual water consumption will depend on how the appliance is used and on the hardness of the water. Weighted remaining moisture content (b)(%)
Spin-drying efficiency class (b)
Type Airborne acoustical noise emission class (b)(spinning phase) Standby mode (W)(if applicable) Networked standby (W)(if applicable)

43
62.9
C (d) free-standing
C (d) 1.00 N/A

Minimum duration of the guarantee offered by the supplier (a),(c):

This product has been designed to release silver ions during the washing cycle

NO

Additional information: Weblink to the supplier’s website, where the information in point 9 of Annex ll to Commission Regulation (EU)2019/2023(1) is found: www.united-electronics.gr

(a) this item shall not be considered relevant for the purposes of Article 2(6) of Regulation (EU) 2017/1369, (b) for the eco 40-60 programme. (c) changes to this item shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU)2017/1369. (d) it the product database automatically generates the definitive content of this cell, the supplier shall not enter these data.

24

CLEANING AND MAINTENANCE
Cleaning and Care
WARNING · Always unplug the appliance and close the water tap before cleaning and maintenance.
Cleaning the Cabinet Proper maintenance on the machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a towel to wipe it off immediately. Never use sharp items to clean the appliance.
CAUTION · Never use abrasive or caustic agents. Such as formic acids or its diluted solvents or
similar substances, like alcohol or chemical products.
Cleaning the Drum Any rust stains left inside the drum by metal articles must be removed immediately using chlorine-free detergents. Never use steel wool for cleaning the drum!
NOTE · Keep any laundry away from the machine while cleaning the drum.
Cleaning the Door Seal and Glass Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leakages. Remove any coins, buttons and other objects from the seal after each wash. Clean the door seal and glass every month to ensure the normal operation of the appliance.
25

Cleaning the Inlet Filter

NOTE · Diminishing water flow is a sign that the filter needs to be cleaned.

1. Close the tap and remove the water supply hose from it.

2. Clean the filter with a brush.

3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose pliers.

4. Use a brush to clean the filter.

5. Reinstall the filter to the water inlet and reconnect the water supply hose. 6. Clean the Inlet filter every 3 months to ensure the normal operation of the appliance.
26

CLEANING AND MAINTENANCE

Cleaning the Detergent Dispenser

1. Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water. 3. Restore the softener cover and push the drawer back into the recess.

1. Press the release and remove the dispenser drawer

2. Clean the dispenser drawer and the softener cover under water

3. Clean the recess with a soft brush

4. Insert the dispenser drawer

NOTE · Do not use abrasive or caustic agents to clean plastic parts. · Clean the detergent dispenser every 3 months to ensure the normal operation of the
appliance.
27

Cleaning the Drain Pump Filter

WARNING
· Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter.
· Be careful of hot water. Wait for water cooling down. Risk of scalding! · Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.

1.Open the lower cover cap

2.Open the filter by turning to the counter clockwise

Filter cap

3.Remove extraneous matter

4.Close the lower cover cap

CAUTION · When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
28

TROUBLE SHOOTING
Whenever there is a problem with the appliance, check if you can solve it following the tables below. If the problem persists, please contact the customer service.

Description
Appliance does not start

Possible Cause
Door is not closed properly.Clothes are stuck.

Solution
Close the door properly and restart. Check the laundry.

Door can´t be opened
Water leakage
Detergent residues in the detergent dispenser Indicator or display does not work
Abnormal noise

Safety protection is activated. Connections are not tight enough.
Detergent is damp and/or clotted.

Disconnect the power and restart.
Check and fasten the water inlet pipe. Check and clean the outlet hose.
Clean and wipe the detergent dispenser dry.

PC board or harness have connection problems.
Fixing bolts are still in place. Floor is not solid or level.

Switch off the power and check if the mains plug is connected properly.
Check if the fixing bolts have been removed. Make sure the appliance is installed on a solid and level floor.

Error Codes Description

Reason

Solution

Prewash Off Extra Rinse Off No Spin Off Pause/StartFlash
Off
Off

Off Off Off Off Off Flash Flash Flash Off Off Flash Off Off Off Off Off Off Off

Door

is

not

closed

properly

Restart after the door Check if the clothes is

is closed. stuck.

Water injecting problem while washing

Check if the water pressure is too low. Straighten the water pipe. Check if the inlet valve filter is blocked.

Overtime water draining Check if the drain hose is blocked.

Water overflow

Restart the washer.

Others

Please try again first, call up service line if there are still troubles. 29

DISPOSAL AND RECYCLING
Important Instructions for Environment
Compliance with the WEEE Directive and Disposing of the Waster Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to offcial collection point for recycling of electrical electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
www.united-electronics.gr
30

Customer Service
Spare parts for your appliance are available for a minimum of 10 years following EU COMMISSION REGULATION 2019/2023 ANNEX II Ecodesign requirements. In case of questions, please contact our local customer service center.
WARNING Risk of electric shock · Never try to repair an appliance which is defective or presumed to
defective. You may put your own and future users’ lives in danger. Only authorised specialists are allowed to carry out this repair work. · Improper repair will void the warranty and subsequent damages can’t be recognized!
Transport IMPORTANT STEPS WHEN MOVING THE APPLIANCE · Unplug the appliance and close the water inlet tap. · Check if the door and the detergent dispenser are closed properly. · Remove the water inlet pipe and the outlet hose from the house
installations. · Let the water drain completely from the appliance (see “Cleaning the
Drain Pump Filter”) · Important: Re-install the 4 transport bolts in the back of the appliance. · This appliance is heavy. Transport with care. Never hold any protruding
part of the machine when lifting. The machine door can not be used as a handle.
31

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

UNITED User Manuals

Related Manuals