SLOAN 3912633 Hirsch Pipe and Supply Instruction Manual

: June 13, 2024
: SLOAN

Table of Contents

SLOAN 3912633 Hirsch Pipe and Supply
Product Information
Product Usage Instructions
FEATURES
RECOMMENDED SPECIFICATION
DIMENSIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SLOAN-LOGO

SLOAN 3912633 Hirsch Pipe and Supply

SLOAN-3912633-Hirsch-Pipe-and-Supply-PRODUCT

Product Information

Code Number: 3912633
Videos : Available
PVD Special Finishes : Yes
Model: ROYAL 186-0.125-DBP
Compliances & Certifications: Not specified in the manual
Intended Use: Living, Building, Challenge

Product Usage Instructions

To use the product, please follow the steps below:

Ensure that you have read and understood the user manual before using the product.
Identify the model of your product as ROYAL 186-0.125-DBP.
If available, watch the provided videos for additional guidance on product usage.
If desired, apply PVD Special Finishes to enhance the appearance of the product.
Verify if there are any specific compliances and certifications required for your intended use. Refer to the product documentation or contact customer support for more information.
This product is suitable for various purposes including living and building challenges.

For further assistance or inquiries, please refer to pages 1 and 2 of the user manual.

CODE NUMBER
3912633

DESCRIPTION
MKNOR=” pf, Dual-Filtered Bypass, Polished Chrome Finish, Fixture Connection Top Spud, Single Flush, Royal® Exposed Manual Urinal Flushometer.

DETAILS

Flush Volume: 0.125 gpf (0.5 Lpf)
Finish: Polished Chrome (CP)
Valve: Diaphragm
Bypass: Dual-Filtered Bypass (DBP)
Valve Body Material: Semi-red Brass
Fixture Type: Urinal
Fixture Connection: Top Spud
Rough-In Dimension : 11 ½” (292mm)
Spud Coupling : ¾” (19mm)
Supply Pipe: ¾” (19mm)

FEATURES

PERMEX® Synthetic Rubber Diaphragm with Dual-Filtered Fixed Bypass
Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw
Non-Hold-Open Handle, Fixed Metering Bypass, and No External Volume Adjustment to Ensure Water Conservation
Diaphragm, Handle Packing, and Vacuum Breaker to be molded from PERMEX® Rubber Compound for Chloramine Resistance ADA Compliant Metal Oscillating Non-Hold-Open Handle
- 3⁄4” I.P.S. Screwdriver Bak-Chek® Angle Stop w/ Free Spinning Vandal Resistant Stop Cap

VIDEOS

PVD Special Finishes $SLOAN-3912633-Hirsch-Pipe-and-Supply-FIG- $1$$

COMPLIANCES & CERTIFICATIONS

$SLOAN-3912633-Hirsch-Pipe-and-Supply-FIG- $2$$

(ADA Compliant, BAA Compliant, BREEAM Materials Credit, BREEAM Water Credit, Carbon Neutral, cUPC Certiﬁed, cUPC Green Certiﬁed, EPD, Green Globes Materials & Resources Credit, Green Globes Water Credit, HPD, LBC Credit, LEED Materials & Resources EPD Credit, LEED Materials & Resources HPD Credit, LEED V4 Water Eﬃciency Credit, Satisﬁes LEED Credits, WaterSense Listed, WELL Building Standard)

RECOMMENDED SPECIFICATION

The Valve Body, Cover, Tailpiece, and Control Stop shall be in conformance with ASTM Alloy Classiﬁcation for Semi- Red Brass. Valve shall comply with the applicable sections of ASSE 1037 and ANSI/ASME 112.19.2.

VALVE OPERATING PRESSURE (FLOWING)
15 – 80 PSI (103 – 552 kPa). Speciﬁc ﬁxtures may require greater minimum ﬂowing pressure – consult manufacturer requirements.

DOWNLOADS

Royal Exposed Installation Instructions
Control Stop Repair and Maintenance Guide
Flush Connections Flanges Repair and Maintenance Guide Tail Piece Repair and Maintenance Guide
Royal Manual Diaphragm Flushometer Repair and Maintenance Guide
Flushometer Pressure gauges
Additional Downloads

NOTES
All information contained within this document is subject to change without notice.

Looking for other variations of the ROYAL 186 product?
View the general spec sheet with all options. Find a compatible urinal for this ﬂushometer. Find a compatible water closet for this ﬂushometer. WaterSense compliant when used with a WaterSense compliant ﬁxture