BELKIN G700 Series Portable PDA Keyboard Instruction Manual
- June 13, 2024
- belkin
Table of Contents
- BELKIN G700 Series Portable PDA Keyboard
- Product Information
- Features and Specifications
- Product Usage Instructions
- Introduction
- Features and Specifications
- Operating the G700 Keyboard
- Driver and Keyboard Installation
- Customizing Keyboard Settings
- Combination Keys
- Assigning Command Hot Keys
- FCC Statement
- Belkin Components Limited One-Year Product Warranty
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BELKIN G700 Series Portable PDA Keyboard
Product Information
The Belkin G700 Series Portable PDA Keyboard is a tool designed to extend the capabilities of your Palm OS handheld device. It provides an easy and convenient way to input data into your handheld. The keyboard is lightweight, weighing only seven ounces, and can be easily folded to fit into a coat pocket. For more information on PDA accessories and mobile enhancements, please visit belkin.com.
Features and Specifications
- Opened dimensions: 6.85 x 9.77 x 2.75 inches (174mm x 248mm x 70mm)
- Closed dimensions: 3.74 x 5.83 x .55 inches (95mm x 148mm x 14mm)
- Weight: 7 ounces (198.4g)
- Power Consumption: In Operation – 1mA, In Sleep Mode – 1A
Product Usage Instructions
Opening the Keyboard
- Press the button to open the keyboard.
- Raise the lid and stand so that they are fully extended.
- Flip up the keyboard connector stand to its full upright position.
- Pull out the left and right sections of the keyboard until the middle section pops up.
- Push the left section, followed by the right section of the keyboard together.
Closing the Keyboard
- Gently pull the left and then the right section of the keyboard apart.
- Push the left and right sections of the keyboard forward towards the center. The middle section will automatically move down to make room for the left and right sections. DO NOT push down on the middle section.
- Flip down the keyboard connector head until it lays flat within the keyboard.
- Pull the lid and stand together.
- Press the lid together with the upper frame.
- Gently press down on the cover until it snaps into the closed position.
On-Keyboard Charging
The G700 keyboard is equipped with an electronic circuit that accepts AC
power. The power receptacle is located on the side ofthe keyboard. An adapter
is included with your G700 keyboard, which can be attached to your PDA’s AC
power adapter. This allows you to charge your PDA directly while using the
keyboard.
Introduction
- Congratulations! You have just purchased the definitive tool to extend your handheld’s capabilities. The Belkin G700 Series Portable PDA Keyboard will give you an easy and convenient way to add data to your Palm OS handheld.
- Designed for the mobile professional, the G700 weighs in at only seven ounces and closes to a size compact enough to fit easily into a coat pocket.
- For our complete selection of PDA accessories and mobile enhancements, please visit us at belkin.com.
Features and Specifications
-
Easy connection compatibility with your Palm OS device
-
Standard QWERTY keyboard layout
-
Shortcut keys for faster operation
-
Ultra-portable design
-
Pass-through charging capability
-
Opened: 6.85″ x 9.77″ x 2.75″ (174mm x 248mm x 70mm)
-
Closed: 3.74″ x 5.83″ x .55″ (95mm x 148mm x 14mm)
-
Weight: 7 ounces (198.4g)
-
Temperature Endurance: 70º C
Power Consumption:- In Operation: 1mA
- In Sleep Mode: 1 A
Operating the G700 Keyboard
Opening the Keyboard
- Open the keyboard by pressing the button.
- Raise the lid and stand so that they are fully extended.
- Flip up the keyboard connector stand to its full upright position.
- Pull out the left and right section of the keyboard until the middle section pops up.
- Push the left, then the right section of the keyboard together.
Closing the Keyboard
- Gently pull the left and then the right section of the keyboard apart.
- Push the left and right section of the keyboard forward the center of the keyboard. The middle section will automatically move down and make room for the left and right sections. DO NOT push down on the middle section.
- Flip down the keyboard connector head until it lays flat within the keyboard.
- Pull the lid and stand together.
- Press the lid together with the upper frame.
- Gently press down on the cover until it snaps in the closed position.
On-keyboard charging
- The G700 keyboard is designed with an electronic circuit that accepts AC power. The power receptacle located on the side of keyboard.
- A plug adapter is included with your G700 keyboard. This adapter attaches to your PDA’s AC power adapter, allowing you to charge your PDA directly while using the keyboard.
Note: Your PDA must be equipped with rechargeable batteries as standard equipment. This feature is not compatible with after-market recharging products.
Driver and Keyboard Installation
Installing the G700 Keyboard Driver
Before Installation
- To prevent potential software conflicts, disable other keyboard applications or specialized applications that use the same serial address installed in your Palm OS device.
- You must have 100Kb of available memory to install the driver.
Install the Dri ver
-
Connect the Palm OS PDA to a computer through its cradle or cable.
-
Insert the driver CD into your CD-ROM drive.
-
If the CD-ROM has been set to auto-run mode, the install process will proceed automatically. Please follow on-screen instructions to finish all steps. Otherwise, please follow steps 4-7 to install driver manually.
-
Tap twice on the “My Computer” icon and then choose your CD-ROM drive.
-
Double-click on the “Belkin G700.prc” file to launch the installer. The Palm OS “Install Tool” window will appear.
-
Select the file (Belkin G700.prc) by clicking on the file name once.
-
Click “Done”. The driver file will be installed into your handheld the next time you perform a HotSync® operation.
To complete your installation onto your handheld, simply perform the HotSync operation. When complete, the icon for G700 keyboard will appear on the “Applications” screen of your handheld.
Enabling the Driver
- Power on your PDA.
- Tap on the “Applications” icon. Your applications window will appear on-screen.
- Tap on the “Keyboard” icon. The configuration screen will appear.
- Tap on the “Status” pull-down menu and select “On”.
- Tap on the “Status” pull-down menu to enable or disable the keyboard.
Connecting and Removing the PDA
- Align the PDA’s connector with the keyboard’s connector. Gently slide the PDA onto the connector until it is firmly seated on the connector.
- To remove, hold the keyboard in place and gently pull the PDA up from the connector until it is completely removed from the keyboard.
Customizing Keyboard Settings
Configuring the Keyboard
You can adjust various keyboard settings to your personal preference.
Combination Keys
Certain keys on the G700 keyboard can perform additional functions in the combinations listed below
- Shift + any key Enters uppercase character
- Ctrl + C Copy
- Ctrl + V Paste
- Ctrl + X Cut
- Cmd + Left arrow Move cursor to the beginning of the line
- Cmd + Right arrow Move cursor to the end of the line
- Tab Tabs forward through edit lines
- Shift + Tab Tabs backward through edit lines
- Fn + Tab Inserts a tab in a line
- Shift + Right arrow Selects right area
- Shift + Left arrow Selects left area
- Shift + Up arrow Selects up area
- Shift + Down arrow Selects down area
- Fn + 1 Applications
- Fn + 2 Menu
- Fn + 3 E-mail
- Fn + 4 Find
- Fn + 5 Calendar
- Fn + 6 Address Book
- Fn + 7 To do list
- Fn + 8 Memo Pad
- Fn + 9 Calculator
- Fn + 0 New
- Fn + Q , then release and type0 A, E, I, O, U, or Y Acute accent: Á, É, Í, Ó, Ú, Y´
- Fn + W , then release and type A, E, I, O, or U Grave accent: À, È, Ì, Ò, Ù
- Fn + E , then release and type A, E, I, O, or U Circumflex: Â, Ê, Î, Ô, Û
- Fn + R , then release and type A, N, or O Tilde: Ã, Ñ, Õ
- Fn + T , then release and type A, E, I, O, U, or Y Dieresis (Umlaut): Ä, Ë, Ï, Ö, Ü, Ÿ
- Fn + Y , then release and type A Nordic A-ring: Å
- Fn + Done Cancel
- Fn + Del Delete Item
- Fn + Enter Ok
- Fn + Cmd Q u i ck-access key: For example, Fn + Cmd, then release and press D brings the effect “delete”
- Fn + Right arrow Details
- Fn + Left arrow Show
- Fn + Up arrow Scroll Upward
- Fn + Down arrow Scroll Downward
- Cmd + 0~9 Programmable Hot Key
Assigning Command Hot Keys
-
Tap the screen at the arrow next to “Setting”, and a popdown setting menu allows you to customize your keyboard set hot key.
-
Tap the screen at the arrow next to “CmdKeys”, and a popdown menu will allow you to define shortcuts.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
- We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F8P3502, F8H1501, F8Y1501 to which this declaration relates:
- Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Components, declare under our sole responsibility that the F8P3502,
F8H1501, and F8Y1501, to which this declaration relates, are in conformity
with Generic Emissions Standard EN55022:1998 and with Generic Immunity
Standard EN55024:1998.
ICES Statement
This Class B digital apparatus complies with Canadian ICES-003.
Belkin Components Limited One-Year Product Warranty
- Belkin Components warrants this product against defects in materials and workmanship for one year. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.
- This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.
- THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF M E R C H A N TABILITY AND FITNESS FOR A PA RTICULAR PURPOSE.
- No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
- BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
- Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you.
- This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
ABOUT COMPANY
- Belkin Components
- 501 West Walnut Street
- Compton
- CA
- 90220
- USA
- Tel: 310.898.1100
- Fax: 310.898.1111
- Belkin Components, Ltd.
- Express Business Park
- Shipton Way
- Rushden
- NN10 6GL
- United Kingdom
- Tel: +44 (0) 1933 35 2000
- Fax: +44 (0) 1933 31 2000
- Belkin Components B.V.
- Starparc Building
- Boeing Avenue 333
- 1119 PH Schiphol-Rijk
- The Netherlands
- Tel: +31 (0) 20 654 7300
- Fax: +31 (0) 20 654 7349
- Belkin Components, Ltd.
- 7 Bowen Cresent
- West Gosford
- NSW 2250
- Australia
- Tel: +61 (2) 4372 8600
- Fax: +61 (2) 4325 4277
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>