FOSHAN WATCH9 Ultra Smartwatch User Manual
- June 13, 2024
- Foshan
Table of Contents
Smart Watch
manual
wear correctly
The bracelet is best worn behind the ulnar styloid.
Adjust the size of the wrist according to the adjustment hole; fasten the
wrist strap buckle.
The sensor should be close to the skin and avoid moving.
charge the bracelet
sure the power of the bracelet is normal when using it for the first time . If the power cannot be turned on normally due to low power , please connect the charger to charge the device.
Install the bracelet APP on your phone
Scan the QR code or enter the APP Store , App Store to download and install the APP
https://fitpro.jusonsmart.com/public/fitpro_download.html
System requirements: Android 5.0 and above; i0S9.0 and above;
device connection
For the first use, it is necessary to connect the APP for calibration.
After successful connection, the bracelet will automatically synchronize the
time, Turn on the Bluetooth switch of the mobile phone system — enter the app
device module — click “Unbind” to enter, and the system will automatically
search the nearby bracelet Bluetooth device, find the bracelet device, and
connect with it.
- After the Android phone is paired successfully, an audio pairing box will pop up on the APP end. Click the successful connection to make/receive calls and listen to music; |OS needs to search the audio Bluetooth name on the mobile phone Bluetooth, and click to connect. (Note: If the Bluetooth of the mobile phone system fails to search audio Bluetooth all the time, please enter the Bluetooth call menu and turn on the switch. You cannot make a call without connecting an audio device)
- APP will automatically save the Bluetooth address of the bracelet. When the APP is opened or running in the background , it will automatically search and connect to the bracelet .
- Android phones use all notification permissions to read contact information and give the APP background running in the phone settings.
Bracelet function description
Up button: short press once on the dial page to enter the main menu,
double-click on the main menu page to switch styles, and short press on other
pages to return to the previous level
Down key: Press and hold the dial for 2 seconds to shut down, press
briefly on any page to return to the dial, and press briefly on the dial page
to extinguish the screen.
Knob function: the dial knob can switch between different dials, the main
menu can be cut to the next page; the honeycomb main menu can be zoomed in and
out
Standby page: Slide down to enter the information page, and slide up to
enter the control center interface; Left sliding switch dial; Right slide in
sideslip
Control center
-
Bluetooth call: 1. If no audio is connected within 5 minutes after the first power on, the switch will automatically turn off; Or the user manually turns off the audio Bluetooth on the bracelet, and needs to manually turn on the switch when using it again. 2. The audio Bluetooth is connected and remains connected. If the audio Bluetooth is disconnected within 1 minute, it will automatically turn off if it is not connected back. After the APP is connected back, it will take the initiative to turn on the audio and connect back. If it is not connected back within 1 minute, it will turn off the audio
-
Style switching: click the menu to switch the main menus of different styles.
-
Music control: The bracelet can control the switching between the previous song and the next song, and pause/start playing.
-
Flashlight: click the flashlight icon to display a white background image, and the backlight is the brightest by default. Only exit manually
-
Do Not Disturb Mode: Turn on the Do Not Disturb mode, and the bracelet will stop receiving notification messages to avoid disturbing the reminder messages.
-
Flight mode: On the control center page, turn on the flight
health tricycle -
Number of steps (the outermost ring): The total number of steps every day, reset overnight, and the number of steps can be set on the APP.
-
Exercise (middle ring): The data comes from any exercise under exercise, and it is cleared overnight. (As long as it is any exercise time in the exercise, it can be accumulated.) It can be set on the exercise target APP.
-
Standing (innermost ring): Data source (if the number of steps in an hour is more than 20 consecutive steps, a standing will be displayed), reset overnight, and can be set on the standing target APP.
-
The second page shows the goals and proportions of the three rings of health.
| Exercise
Heart rate is measured at the beginning of each exercise, and then it is
automatically measured every 5 minutes during the exercise process. Each
exercise can pause and continue its functions, and the music can be controlled
during the exercise.
When the exercise is finished, the current exercise summary will be displayed.
This exercise data is not saved locally, and the exercise summary will not be
displayed when the exercise is finished for less than 5 minutes.
---|---
| Heart rate /blood pressure/bloxygen/electrocardiogram
After entering the measurement interface and waiting for a few seconds, the
current test result will be displayed. This feature requires the bracelet to
support a heart rate sensor.
| Dial
Dial the dial to make calls (note: the phone needs to be connected with audio
to use this function)
| Phone book
Add common contacts in the APP, and the contacts can be displayed in the phone
book of the phone ring synchronously.
Click The contact person can make a call (note: the phone needs to be
connected with audio to use this function)
| SOS
Add common contacts in the APP, and the first number in the APP is set as the
emergency contact number by default. Users can also change the settings. If
the audio is connected, click this icon to directly pull out the phone. if the
audio is not connected, click to prompt that Bluetooth is not connected.
| Style switch
can switch between different styles of the main menu in the options.
| Information mode
connected to the APP, if the push notification reminder is enabled, when the
bracelet pushes multiple reminder messages, you can enter this interface to
view the latest message records .
| Stopwatch function
Enter the stopwatch and click the start button to start timing, click the
pause button to stop, and click the reset button to clear the timing.
| Weather
Connect to the app and enter this interface to view the weather conditions of
the day.
| Find a phone
APP is connected , click “Find Phone ” on the bracelet and the phone will emit
a prompt tone
| Game
Built-in entertainment games
| Sleep mode
The latest 7-day records are displayed locally on the sleep details page, and
the sleep data details can be viewed by connecting to the APP.
Note: Only when the app is connected and the bracelet is worn to sleep
will the sleep data be uploaded to the app and the detection will start at 10
pm.
| Photograph
connected to the app , start the camera from the bracelet or enter the remote
camera interface from the APP, shake/tum the wrist/touch the bracelet, and
automatically take a photo after a countdown of 3 seconds. Please allow the
APP to access the album to save the self-portrait photo.
| Reset
Resetting this function will clear all data on the bracelet. (like step
counting}
| About
You can view information about the machine.
| Siri
Tap the voice assistant menu to launch the language assistant.
(Note: The mobile phone needs to be connected to the audio at the same
time, and the user’s voice needs to be set in advance in the voice menu on the
smartphone side)
| Language
You can set any language in the options.
| Set Date
You can set the date required by the user.
| Set time
You can set the time required by the user.
| Backlight time
There are multiple options on the backlight time setting page.
When the corresponding time is selected, the screen will automatically turn
off.
| Return to the dial
There are multiple options for returning to the dial setting page.
After the disk is extinguished, the timer starts. When the corresponding time
is selected, it will return to the dial.
| Bedside lamp
Turn on the switch, the charging page screen is always on, and only pressing
the key can stop the screen
| Sideslip
itis enabled by default, and slides right on the dial to enter the sideslip
page
| QR code
Mobile phone scanning QR code can download the APP, and scanning the code at
the APP end can automatically bind the bracelet device
APP functions and settings
Personal information
You can gender-age-height-weight-distance, etc.
You can also set your daily goal step count and monitor your daily progress.
App push
In the connected state, if this function is turned on, when there are messages
such as WeChat, QQ, Facebook, etc., the bracelet will push reminders and
display the received content (you can also go to the bracelet information menu
to view the latest message records). (APP should be given permission to obtain
system notification).
Tips for Android users :
When using the reminder function, it needs to be set to allow ” Fit Pro “to
run in the background; it is recommended to add ” Fit Pro” as trust in the
permission management and open all permissions.
Alarm setting
In the connected state, you can set 8 alarm clocks. After setting, they will
be synchronized to the bracelet. It supports offline alarm clocks. After the
synchronization is successful, even if the APP is not connected, the bracelet
will remind you at the set time.
Find the bracelet
When connected, click “Find Bracelet” and the bracelet will be prompted to
respond.
custom watch face
Connect the APP to get the dial settings, and select the recommended
dial/mobile phone album to upgrade and synchronize to the bracelet.
Sedentary reminder
Set whether to enable the long sitting reminder function. If you sit for a
long time within the set time, the bracelet will remind you once an hour.
Device reset
Setting reset this function will clear all data of the bracelet (such as step
counting)
Remove device
Remove Device This feature will clear data and
Basic parameters
Equipment type | smart wristband | Battery Type | Lithium polymer |
---|---|---|---|
vibration motor | support | Synchron ously | BT 5.3 |
Operating temperature | -10°C -50 °C | sensor | Low power accelerometer |
System Requirements | 10S 9 or above /Android 5.0 or |
Precautions
- It is not advisable to wear it for bathing and swimming.
- Please connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the handle to places with high moisture, extremely high or low temperature for a long time.
- If the wristband crashes and restarts, please check the phone memory information to clear it and try again, or exit the APP and reopen it.
Parts Introduction
- Host
- Wristband
- Charging cable
- Packaging box and manual
This manual is for reference only, please refer to the actual product
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>