PANDUIT CJRCAPBU Mini Com UTP Cat 6 Ri Instruction Manual
- June 13, 2024
- PANDUIT
Table of Contents
PANDUIT CJRCAPBU Mini Com UTP Cat 6 Ri Instruction Manual
Understanding the Label
IMPORTANT!: Determine the desired direction of cable before wiring the cap. The cap, in relation to the jack, must be kept consistent throughout the entire termination.
REMOVAL STEPS
Notes:
- For specified performance, follow TIA/EIA 568-C installation guidelines.
- Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062″ (1.57mm) maximum insulated conductor outside diameter.
- Jack Modules may be re-terminated a minimum of 20 times.
- For technical and performance information, consult Panduit Technical Support.
As with all Wiring Accessories, the following statements apply:
- Never install communications wiring during a lightning storm.
- Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
- Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
- Use caution when installing or modifying communication wiring.
For Instructions in Local Languages and Technical Support: www.panduit.com
E-mail: techsupport@panduit.com
Phone: 866-405-6654
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>