AMERICAN LIGHTING 72795-143-L Shore Pointe Light Post Lantern Instruction Manual
- June 13, 2024
- American Lighting
Table of Contents
INSTALLATION INSTRUCTIONS
Model# 72795-143-L / #72796-143-L
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
PREPARING FOR INSTALLATION (Fig. 1)
-
Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clear area.
Take care not to misplace any small parts necessary for installation. -
Pull black, white, and ground wires out of base cup (D).
-
Place glass (F) in the middle of base cup (D), and thread into fixture frame (G). Secure base cup (D) with finials (E) until tight.
CONNECTING THE WIRES (Fig. 2) -
Connect electrical wires as shown in Fig. 2 making sure that all wire connectors (B) are secured. If your post (A) (Not included) has a ground wire (green or bare copper), connect fixture ground wire to it. If not, consult your electrician for proper grounding.
-
Tuck wire connectors carefully inside base cup (D).
7. Align base cup (D) with post (A) and secure with mounting screws (C).
(Fig.1) -
LED information (#72795-143-L: 1 x AC LED 11W included. #72796-143L:
1 x AC LED 8W included.) (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!) -
This fixture is ETL listed for wet location applications.
Replacing LED module (Fig.3)
The LED module can be replaced by a qualified electrician without cutting of
wire and without damage to any decorative element to which the fixture is
attached. See installation steps for more details (Fig.3).
a. Shut off power. Loosen finials (E) and separate fixture frame (G) from base
cup (D). Remove glass (F).
b. Loosen screws (J) and washers (L) on the LED module (K), then carefully
remove LED module (K).
c. Reverse steps a-b for installing the new LED module.
Note: The LED module should be provided by a specified supplier.
Your installation is now complete. Return power to the outlet box and test the fixture.
“CAUTION-RISK OF FIRE CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCHCIRCUIT CONDUCTOR”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>