VIVO PP-2-V72G Gray Clamp On Desk Privacy Panels Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
Gray Clamp-on Desk Privacy Panels (x2)
Instruction Manual
PP-2-V72G Gray Clamp On Desk Privacy Panels
SKU: PP-2-V72G
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/pp-2-v72g
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 78-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
ABOVE DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and Washers (S-B).
Tighten with a Phillips screwdriver.
OPTION B:
Gap-Fit for Cables & Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers (S-B), and
Spacers (S-A) as shown in the diagram. Tighten with a Phillips
screwdriver.
STEP 2
Place the assembled panel on the edge of the desk, and tighten the clamps to
secure.
NOTE: Over-tightening the clamps will cause the panel to lean
forwards.
BELOW DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and Washers (S-B).
Tighten with a Phillips screwdriver.
OPTION B: Gap-Fit for Cables & Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers (S-B), and
Spacers (S-A) as shown in the diagram. Tighten with a Phillips
screwdriver.
STEP 2
Place the assembled panel on the edge of the desk, and tighten the clamps to
secure.
NOTE: Over-tightening the clamps will cause the panel to lean
forwards.
Love your new VIVO setup and want
to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/16/2023
REV1.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-
us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>