njoy Royer 16A Surge Protector User Manual

: June 13, 2024
: NJOY

Table of Contents

Package Contents
Product Overview
General Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

njoy Royer 16A Surge Protector User Manual

Thank you for purchasing our products!

Please read this manual before using the product.

nJoy is a brand of power and backup protection products that create solutions for multiple levels of environment complexity, residential to industrial.

This small, portable voltage protector ROYER 16A, is used to compensate and guard against voltage fluctuations from mains power. It is plugged in between sensitive equipment and a wall outlet and is designed to cut off power when the input voltage levels are becoming dangerous. When the voltages are again in the safe range, Royer will auto-restart the connected equipment without any risk.

Package Contents

Voltage protector unit
User Manual
Power Cord (included)

Product Overview

Package Contents
Side View

General Specifications

Product Name	Royer 16A
Rated Current	16A
Low Voltage Cut Of	195V
Low Voltage Reconnect	205V
High Voltage Cut Of	250V
High Voltage Reconnect	245V
Delay Time	180s
IP Level	IP20

Input Voltage
Green LED: Power On
Yellow LED: Delaying
Red LED: Protecting
“I/O” Button
On/Off Power Switch
AC Input Cable
Output Socket

Important Safety Warnings

Please DO NOT connect the unit to the environment with direct current or simulated sine wave.
To prevent the risk of fire or electric shock, install the device in a temperature and humidity controlled indoor area free of conductive contaminants. (See the specifications in the product’s datasheet for the acceptable temperature and humidity range.)

Connection and Operation Step 1. Inspection
Remove the unit from the shipping package and inspect it for damage that might have occurred during transportation.
Notify the carrier and place of purchase if any damage is found.
Step 2.
Make sure the power switch of voltage protector is at “OFF” position.
Step 3.
Plug the voltage protector into wall socket.
Step 4.
Make sure the power switch of appliance is at “OFF” position
Step 5.
Plug the appliance into the output socket of voltage protector.
Step 6.
Switch on the voltage protector
Step 7.
Switch on the appliance
Step 8.
“I/O” Button Function

Press it once to cancel the delaying
Press it to show the voltage once it’s in a high or low voltage protecting status

Display Indicators : Input voltage
Digital Display :countdown for delaying
** :High voltage protecting
: Low voltage protecting
CAUTION
** Earth cable should be chosen according to the current capacity! All units’ earth connections, which are connected to voltage protector, should be done with earth cable. Without earth connection or unproved earth connected units is dangerous for user’s health, and has high risk of electronic circuit board faults. Using earth cable with improper diameter could be dangerous for user’s health and safety of the unit.

EU Declaration of Conformity
We, manufacturer
DAI-TECH SA
Str. Berlin, Nr 6, C.P. 307160, Dumbrăvița, Timiș, România
declare that the products
ROYER 16A AVRL-16A01RY-CS01B are in conformity with
(EC conformity marking)
Tested with the listed standards, the above mentioned products were found in compliance with 2004/108/EC EMC Directive and with 2006/95/EC LVD Directive.
EN 62040-2: 2006
EN 6100-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 62040-1-1: 2003 (LVD) and in conformity with (RoHS conformity marking) in accordance with 2002/95 EC-RoHS Directive