AMOOWA M1S Wireless Pico Pocket Projector User Manual

AMOOWA M1S Wireless Pico Pocket Projector

Projector Introduction

Packaging overview

Introduction of the protocol

Remote Control Description

Use Projector

Turn on/off the projector

1. Turn on
   Press and hold the right on/off button for 3 seconds to turn on the device.

2. Turn off
   Press and hold the power button for 1 second to turn off the device, or press and hold the power button on the remote control to power off.

Focus adjust

1. Manual focus
2. Press and hold the “M” button of the projector for about 1 second to bring up the focus circle, and then press and hold the projector’s “left/right” direction arrow to focus manually;
3. Press and hold the “GI &” button of the remote control for 1 second. After the focusing circle appears, press and hold the “Left/Right” direction key of the remote control to focus manually.
4. Auto-focus method
5. The distance between the projector and the wall is about 0.5-1.SM, short press the “M” button of the projector, the focus circle will pop up autofocus will be performed, and the focus circle disappears after focusing;
6. Tilt the projector back and forth about 45 degrees, the focusing ring will pop up, and autofocus will be activated and complete itself;
7. Short press the “ ” button of the remote control, the focus ring will pop up, and the autofocus will be activated and complete itself;

Bluetooth remote control pairing

Pairing method:

1. When the Bluetooth interface appears for the first time as the device is turned on, press the “OK+ Volume-“ button of the remote controller for about 5 seconds, the remote controller indicator flashes quickly, and the remote controller enters automatic pairing mode.
2. Enter the “Settings-Bluetooth” interface through the “Direction/Confirm” button on the body, press the “OK+ Volume-“ button of the remote controller for about 5 seconds, the remote control indicator flashes quickly, and then click “ Scan to find Device” , the remote controller enters automatic pairing mode.

Connect to Wi-Fi network

1. Enter the system, Settings ➔ WiFi ➔ select network and enter the password;

Operation main interface

Instruction of the top navigation bar

How to use the mirror function

According to the devices of the mirror function, open the corresponding applications (Apple Screen Mirror/ Android Mirror/ Apple Wired Mirror), or you can open the relevant applications in the “Settings-Mirror” interface to start the Screen Mirror function.

Apple Mirrorfunction

1. iPhone device connection
2. Connect the device to the network;
3. Enter iPhone connection operation, there are two methods for iPhone

  *  **UnderWi-Fi environment:** Open the **“Settings”** of the mobile phone– **“Wireless LAN”** , Connect the mobile phone to the same network as the projector;
  * WithoutWi-Fi environment Open the **“Settings”** of the mobile phone– **“Personal** Hotspot”, Turn on the hot spot and connect the projector to the hot spot;
3. Go back to the main interface of the phone, slide up to open the control panel, and click Airplay;
4. Select **“XXX-XXXXXX-XXX”** 1 open **“Mirror”,** and complete.

Mac device connection

1. The projector is connected to the internet: Click” “, select and connect to the same network as the projector;
2. Click “ “and select 11MlS-XXXXXX” to finish.

Android screen mirror function

1. Open the “Android Projection Screen” application on the projector;
2. Connect the Android phone and the projector under the same WiFi;
3. In the mobile phone “Settings” ➔ “WLAN” ➔ “Wireless Screen projection”, turn on the wireless projection function, and search for the device “MlS-XXXXXX” (random number), select connection;
4. Most Androids can be found in the “Shortcut Bar ➔ Screen Sharing/ Screen mirroring/projection screen/WLAN/wireless display/multi-screen interaction” Search the device under the menu and connect.

Wired screen mirror function (ioS)

1. Please connect the iPhone and projector as the picture shows (Picture 3)
2. Please select “Trust” in the pop-up question on the phone (Picture 4).

Description of external equipment

How to connect a USB flash drive

1. Insert the U disk into the USB port, open the “File Management” application, and the device can be identified.
2. You can also go to “MY APPS – >File Manager” to check

Software upgrade

Local upgrade:

Copy the downloaded firmware update.zip file to the root directory of the USB flash drive, and insert the USB flash drive (in FAT32 format); the system can automatically recognize the upgrade package and follow the prompts to upgrade (make sure the battery is sufficient when upgrading).

Online upgrade:

In the “Settings-Software Update-System Update” interface, search for the new version upgrade.

Adjust brightness

There are three brightness modes of “Energy Saving/Normal/High Brightness” for selection under the interface of Settings-Image-Brightness Mode.

How to connect HDMI

After inserting the HDMI device into the HDMI interface, open the “HDMI switch” icon and click to confirm; or after connecting the HDMI device, enter the “Settings image- HDMI Connection” interface and confirm to open.

System Settings

Reset the system in “Settings-Software Update-Restore Factory Settings”. System reset will clear the local data and local files in your device and restore it to the state when the device was shipped. Please use this function with caution

How to charge

Connect the power adapter to the Type-C charging port (Figure 7). The power indicator light is steady red, which means it is charging. The blue power indicator light is on, indicating that the charging is complete.

Introduction of other functions

1. The screen displays an abnormal situation handling method
2.  When the screen shows the trapezoid, you can perform horizontal calibration under the “Settings-Image-Keystone Correction” interface; or turn off the “Automatic Keystone Correction” to perform custom corrections, which can solve the problem of image errors.
3.  When the autofocus of the screen is not clear, place the machine horizontally about 1-2 meters away from the wall, and in the “Settings-Image-Auto Focus” interface, select “Al Mode” for “Al Auto Focus Machine Learning”, this can solve the problem of unclear autofocus of the machine.
4. How to connect Bluetooth speakers
5. Enter settings—Bluetooth.
6. Turn on the Bluetooth speaker and enable the Bluetooth pairing mode (for pairing mode, please check the Bluetooth speaker manual).
7. Click “Scan for device” on the interface of the micro projector.
8. Then the available Bluetooth speaker name will be displayed on the available devices.
9. Click Connect to display the Bluetooth speaker showing “Connected” on the projector to complete.

Product Specifications

Note: This manual is for reference only, and the information in the manual is subject to change without notice. The manufacturer does not assume any direct or indirect responsibility resulting from changes to the manual.

FAQs

What is the native resolution of the AMOOWA M1S Wireless Pico Pocket Projector?

The native resolution of the AMOOWA M1S Wireless Pico Pocket Projector is 1280 x 720 pixels (HD).

What is the brightness level of this pico pocket projector?

The AMOOWA M1S projector has a brightness level of 200 ANSI Lumens, providing clear visuals in various lighting conditions.

Can I wirelessly connect my smartphone or tablet to this projector?

Yes, you can wirelessly connect your smartphone or tablet to the projector using Wi-Fi screen mirroring technologies like AirPlay or Miracast, depending on your device's compatibility.

What is the maximum screen size this projector can create?

The projector can project an image size ranging from 30 inches to 150 inches (diagonal), offering flexibility in screen size for different viewing environments.

Does it have built-in Wi-Fi for online streaming?

Yes, the AMOOWA M1S Wireless Pico Pocket Projector is equipped with built-in Wi-Fi, enabling you to access online content and streaming services directly from the projector.

Is there a built-in speaker in this pico pocket projector?

Yes, the projector features a built-in 3-watt speaker for audio playback. You can also connect external speakers or headphones for enhanced audio quality.

What are the input options for connecting external devices?

The projector offers various input options, including HDMI, USB, microSD card slot, and a 3.5mm audio jack, allowing you to connect a wide range of devices such as laptops, gaming consoles, and external audio sources.

Can I use this pico pocket projector for outdoor movie nights?

Yes, you can use the AMOOWA M1S projector for outdoor movie nights, but it's best suited for dark or low-light outdoor settings due to its moderate brightness.

Is there a remote control included with this wireless pico projector?

Yes, the wireless pico projector comes with a remote control for convenient navigation and control of the projector's settings.

Is there a warranty included with this projector?

Typically, the AMOOWA M1S Wireless Pico Pocket Projector comes with a manufacturer's warranty. Please refer to the product documentation or contact the manufacturer for warranty details.

What is the lamp life of this projector?

The lamp of the projector has a rated lifespan of approximately 30,000 hours, ensuring long-lasting performance with minimal maintenance.

Is there an autofocus feature on this wireless pico projector?

Yes, the projector includes autofocus functionality, allowing it to automatically adjust and deliver a sharp and clear image on the screen.

Video- Introducing the AMOOWA M1S Pico Projector

Download this PDF Link: AMOOWA M1S Wireless Pico Pocket Projector User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>