Oculus Quest All-in-one VR Gaming Headset User Manual
- June 15, 2024
- oculus
Table of Contents
Oculus Quest All-in-one VR Gaming Headset User Manual
Important notes
- Keep the headset away from sunlight, as sunlight can cause permanent damage to the lenses
- Don’t use alcoholic wipes to clean the headset as this can damage the headset. Instead, you can use non-alcoholic, anti-bacterial wipes
- Don’t perform a factory reset on the headset as this will delete all the games and you won’t be able to play, we cannot give the headset to our next clients either
- Don’t drop or throw the controllers to the ground or against the wall
How to wear your headset?
Video Link: For the Video Tutorial Click HERE
To put on your headset
- Loosen the side straps and then the top strap.
- Starting from the back, put on your headset.
- Make sure to pull the back strap down until it cradles the base of your head.
- If you’re wearing glasses, put on the headset from the front first.
- Tighten the side tabs and then the top strap.
- Make sure that the straps aren’t too tight. The headset should fit comfortably and not apply too much pressure on your face and head.
To adjust your view
- With your hands holding both sides of your headset, slowly move your Oculus Quest up and down until the picture is clear and the headset feels comfortable.
- If you wear glasses, insert the glasses spacer into your Oculus Quest headset before using it.
- If the image in your headset isn’t clear, you can use your left thumb to move the image slider on the left of the bottom of your headset to the left and right until the image is clear.
How to Set Up the Guardian to Play
Video link: For the Video Tutorial Click HERE If you’re setting up Guardian
with your Quest for the first time, follow the on-screen instructions.
Guardian Sizes
- Guardian lets you create boundaries in VR that appear when you get too close to the edge of your play area. When setting up Guardian, your play area will show as one of these sizes:
- Below Minimum: If your play area is below minimum, it doesn’t meet the 1 meter by 1 meter requirement to use Guardian.
- Minimum: You have enough space for the minimum required play area, but some apps may recommend at least 2 meters by 2 meters for the best experience.
- Recommended: You have the recommended play area for Roomscale experiences. This means that your play area meets or exceeds the 2-meter by 2-meter space needed to set up the Guardian System.
Resetting Your Guardian
- Select Settings from the bottom toolbar.
- Select Guardian in the left menu.
- Click Set Up Guardian.
- Follow the on-screen instructions to reset your Guardian.
Controllers
Video link
For the Video Tutorial Click HERE The Oculus Quest Touch controllers are a
pair of tracked controllers that give you hand presence—the feeling that your
virtual hands are your own. Touch controllers feature traditional action
buttons, thumb-sticks and analog triggers that add familiarity to new
experiences.
You can use your controller to interact with apps and games, using the buttons on your controller to do the following:
- Trigger, A and X buttons: Press to select things.
- B and Y: Press to go back to the previous screen or menu.
- Oculus button: Press to go back to Oculus Home or press and hold to reset your controller orientation.
- Grip button: Press to grab objects or make a fist when using your virtual hands.
- Menu button: Press the menu button from Oculus Home to bring up the menu.
- Press any button to wake the controller after you turn on your headset.
Note: Individual apps may include tutorials for how to use the buttons on your Oculus Touch controllers in each VR experience.
How to Connect to the WIFI
Your Oculus Quest needs to be connected to a Wi-Fi network to use and access
most features and content. To change the Wi-Fi network your Oculus Quest is
connected to from your Oculus Quest Headset:
- Turn on your Oculus Quest and put on your headset.
- Select Settings from the bottom toolbar menu.
- Select Wi-Fi.
- Select the Wi-Fi network you’d like to connect to.
- If prompted, enter the password for the Wi-Fi network you’d like to connect to.
- Select Connect to connect to the Wi-Fi network.
Safety Notice
Be careful of the real world Whenever you use your Quest you’ll set up a
Guardian boundary that marks the edges of your play area. This boundary
ensures you don’t bump into anything and have a safe area to play in. That
being said, it is very easy to forget that you’re blindfolded to the real
world. If you’re playing at home, for example, it is a good idea to warn other
people that you’ll be going into VR before you go in and that they know your
play area boundaries too. Also, be careful of pets — if you have a
particularly affectionate animal and plan to play a pretty active VR game, it
might be a good idea to keep them in a separate room until you’re done
playing.
Take Breaks
It may help to take regular breaks as often as every 20 minutes. Many games on
Quest tend to be fairly comfortable, but some games can simulate movement in
ways that might lead some people to feel queasy. If you do start to feel
queasy, though, you should stop immediately. Over time with regular use, some
people may become more adjusted to being in VR but others may not, so always
pay attention to what your body is telling you and don’t try to “push through”
any feelings of discomfort. If you do feel uncomfortable it can help to take a
break, drink some water, eat something, get good sleep and try VR again when
you
are ready.
Keep Lenses Away from Direct Sunlight
Sunlight can cause permanent damage to the lenses, therefore please keep the
headset away from windows and don’t use it outside.
Where can I find the Games?
As soon as you set up a Guardian you’ll be able to see the VR Menu. You can
find the names in one of the following two folders:
Library / Apps
Library / Unknown Sources / Quest App Launcher
Download PDF:Oculus Quest All-in-one VR Gaming Headset User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>