BALDERIA PPS500 500W Power Cube Instruction Manual

BALDERIA PPS500 500W Power Cube

Product Specifications

• Input: 230V~50HZ, 500W (1000W Surge)
• Output: 10W Max, 110-205 KHz
• Equipment Protection: Class II with reinforced insulation

Product Usage Instructions

Safety Precautions

• Do not dispose of the product with household waste; use a collection point for waste electrical equipment.
• Keep the product away from flames, fire, and heat due to its flammable nature.
• Ensure proper grounding and avoid using the product with medical equipment, nuclear facility equipment, spacecraft manufacturing equipment, or any other unsuitable devices to prevent accidents and malfunctions.

Intended Use

• The PPS500 is designed for charging electronic devices with a maximum power consumption of 500W.

Declaration of Conformity

• Manufacturer: IN & OUT HOUSE GmbH
• Address: Landrat-Kaptain-Str. 51, DE – 52372 Kreuzau
• Date: 21.09.2023
• Location: Kreuzau, Germany
• Managing Director: Mr. Philipp Ink

FAQ

• Q: Can I use the PPS500 with medical equipment?
  A: No, the product is not suitable for use with medical equipment. Avoid using it with any prohibited devices to prevent accidents.

• Q: What should I do with the product at the end of its life?
  A: Dispose of the product via a collection point for waste electrical equipment. Do not dispose of it with household waste.

BALDERIA Power Cube
Model: PPSS00
Instruction manual

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INFORMATION
To ensure safe operation and service of the power station, read and understand all instructions. Failure to follow all instructions may result in severe injury or property damage.
The loss caused by wrong use of POWER STATION is not covered by our Warranty.

CHARGE NOW

• Please FULLY charge the POWER STATION as soon as possible once you have it in possession.
• Due to the length of time spent in transit and storage, the batteries may be reduced or in sleep mode.
• Plug in the POWER STATION into a wall outlet for 10 minutes to reactivate the battery. If it doesn’t charge after 10 minutes, please contact customer servicet team.

Note:
When turning on the AC Button, the LCD Display may show watts being drawn before you have plugged into a wall outlet. This is normal response caused by the “no-load” discharge. It is recommended that you turn off the output button(s) when not in use.

FEATURE DETAILS

1. LCD Screen Display
2. AC Outet
3. USB QC3.0
4. USB-PD
5. Cigarette Lighter Output
6. DC Input
7. Flashlight
8. Wireless Charger
9. Handle
10. LED Light
11. Protective Cover
12. Power ON/OFF Button
13. LED Light & Flashlight ON/OFF Button
14. DC/USB Outputs Power ON/OFF Button
15. ECO Function ON/OFF Button

OPERATION GUIDE

FUNCTION BUTTONS

• 12: Power ON/OFF Button
  POWER ON/OFF BUTTON is the master switch. Press POWER ON/OFF BUTTON to activate the DC/AC/ECO BUTTONS.
  13: LED Lighting & Flashlight ON/OFF Button
  Press LED Lighting & Flashlight ON/OFF Button once to turn on the flashlight, press it again to turn on the LED LIGHT.
  Press LED Lighting & Flashlight ON/OFF Button over 3 seconds to turn on the SOS mode.

• 14: DC/USB Outputs Power ON/OFF Button
  The DC/USB output ports will Not Function until the DC OUTPUT POWER ON/OFF BUTTON is pressed to activate.

• 15: ECO Function ON/OFF Button
  ECO Mode: If the output ports are not in use, the power station will automatically turn off after 1 hour for power saving.
  Press the POWER ON/OFF Button, ECO Mode will be activated by default. If you do not need this function, please press the ECO ON/OFF Button to turn it off. The ECO mode will NOT Function until the ECO Button is on to activate again.

• 16: AC Outlet Power ON/OFF Button
  The AC Outlet will NOT function until the AC OUTLET POWER ON/OFF BUTTON is pressed to activate.
  WIRELESS CHARGER
  Press ON/OFF Button before charging. Press the NO/OFF Button to shut down the output.

LCD FEATURES

• A: Battery Level
• B: Remaining Usage Time
• C: Output Power
• D: Remaining Charging Time
• E: Input Power
• F: Low Voltage Warning
• G: Temperature Warning

DETAILS DISPLAYED ON LCD

• Battery Level: The battery level is provided by the percentage of battery charge corresponding to the number of bars and percentage displayed.
• PLEASE BE AWARE that this value can adjust multiple times as the energy draw changes from the connected devices. This is evident during the initial activation of ports with a connected device.
• RECOMMENDED charge the POWER STATION when battery indicates less than 20%.Note that when you first plug into a power source, whether a solar panel or a wall charger, the POWER STATION may take a couple of minutes to detect and adjust its charge circuitry before it starts to draw power.
• Remaining Charging Time: The POWER STATION can provide remaining charging time in hours and minutes.
• Input Power: The POWER STATION can provide input energy in watts.
• Remaining Usage Time: The POWER STATION can provide remaining usage time in hours and minutes.
• Output Power: The display will provide the total output watts of the Cigarette Lighter Port, USB-A, USB-C and AC Outlet(s).
• Low Voltage Warning: If the Low Voltage Warning indicator is on, please recharge  the power station.
• Temperature Indicator: The Temperature Indicator lights on means the battery temperature of POWER STATION is too low/high. All functions of input and output will be stopped until the battery temperature returns to the working range.

GENERAL SPECIFICATIONS

ACCESSORIES

NOTICES:

• Check the input charge cable. The ports will be efficient when the input charge cable meets the specification outlined in the GENERAL SPECIFICATIONS section.
• Only charge POWER STATION with provided AC wall adapter.

NOTICE:
Power stations are available in different types of AC outlets, which are suitable for different countries. Please check the below AC Outlet list for your references.

OPERATION GUIDE

HOW TO CHARGE

RECOMMEND TO DISCONNECT THE POWER STATION WHEN IT FULLY CHARGED.

POWERING / CHARGING DEVICES

Select the type of output required by pressing either the DC (DC/USB outputs), AC, or ECO
outlet button. The ports will NOT function until the appropriate button(s) are pressed to
activatethe port. When the ports are activated, the indicator on the button will illuminate green, indicating that the output(s) are active. The LCD screen will turn on and provide details on the chargingoutput.
Press the ON/OFF BUTTON(s) to shut down the output(s) when not in use.

PASS-THROUGH CHARGING
The advanced battery management system of the POWER STATION allows it to charge a connected device via DC outputs & USB outputs & AC output while charging the POWER STATION.

OVERLOAD CONDITION
If an overload condition occurs on the OUTPUT ports, POWER STATION will:
Automatically turn off the outlet’s power.

• The indicator light of the LCD Screen will still be illuminated.
• The DC Output’s status will still be the same status as usual.

OPERATING INSTRUCTIONS

CHARGING POWER STATION
When charging, the LCD will show battery level. POWER STATION is fully charged when it shows 100%.
It is recommended to FULLY charge POWER STATION every 3 months to maintain the health of the battery pack.

Please power/charge the electric devices within the rated power of power station.
The Watts/Watt Hours of these listed devices are simply an estimation and not applicable to all appliances.
Please check the device’s user manual for the actual power Watts.

MAINTENANCE

MAINTENANCE
Recharge as needed. There are no pre-designated intervals at which to recharge as long as the POWER STATION is being used regularly. Avoid fully draining the battery to 0%, as this can impact the quality and life span of the battery. Periodically inspect all ports and wall chargers for any debris, dirt, damage, and corrosion. DO NOT attempt to fix it. DO NOT cover the POWER STATION with towels, clothing, or other items. Regularly inspect the side vents to make sure there is no dirt or dust. If there is debris, clean the unit following the cleaning procedures noted in the manual.

CLEANING
Be sure that POWER STATION is disconnected from all input power sources and output devices. Use a clean, dry, soft lint-free cloth to wipe it down. Remove any debris, dirt, or other blockages on both side vents. When cleaning debris from the side vents, do not allow the debris, dirt, or other blockages to enter the body of POWER STATION.
DO NOT use abrasive cleaners or solvents.
DO NOT use compressed air to clean side cooling vents.
To avoid the risk of electrical shock, DO NOT use metal objects to clean the ports.

STORAGE

If storing for more than 1 month, charge it completely before storing it. Recharge the unit approximately every 3 months to avoid full discharge and possible damage. Store indoors in
cool temperatures with only mild humidity, and away from direct sunlight (See GENERAL SPECIFICATIONS section). Leaving the unit in a vehicle or other confined spaces in extremely hot temperatures would lead to decrease the service life, cause overheating, and even fires. Extreme cold temperatures can harm the POWER STATION performance and service life. Keep away from corrosive chemicals and gases. After taking the unit out of storage, inspect the unit and make sure all the accessories look satisfactory. Review the intake and the exhaust side vents to ensure they are clear of debris. Allow the POWER STATION to return to safe ambient conditions before recharging or charging other devices.

DISPOSAL/RECYCLE
Do not place the unit or its accessories in the trash. These items must be appropriately disposed of in accordance with local regulations. See your local government’s laws for additional information.

TROUBLESHOOTING

**** E1

| AC Output Overload Warning| Please charge/power the devices within the rated power. Otherwise , the AC button will automatically turn off.
E2| AC Output Off| Please charge/power the devices within the rated power. And then push the AC button to restart.
E3| **** DC Output Overvoltage I Undervoltage| Please charge/power the devices within the rated

Voltage of DC and then press the ON/OFF Button to resume the functions.

E7| DC Output Overload Protection| Please charge/power the devices within the rated power of DC and then press the ON/OFF

Button to resume the functions.

E8| USB Output Overload Protection| Please charge/power the devices within the rated power  of USB and then press the ON/OFF Button to resume the functions.
E4/E5/E6/E9| Output Overload Protection| When E1/E7/E8 occurs, E4/E5/E6/E9 will be displayed to determine the problem more accurately. Please charge/power the devices within the rated powers and then push the corresponding button to restart.
E62| Over-long Charging Reminder| Stop charging after 100%.
**** E72| Charging Safety Protection| Unplug the charging cable and turn off the device, plug again after a period of time.

NOTICE:
If none of these solutions works, or if you see a different warning code than the listed codes above, please stop using the power station, make note of the warning codes, and contact customer service for further instruction.

**** Unable to Charge

| Check if the power adapter’s cord is

inserted fully into the DC input and wall plug.

| Confirm whether it is a connecting problem.
Check if the adapter indicator is on if connected well.| If the light is still off, please contact customer service for help.
The charging indicator is on, still can’t charge.| Contact customer service for help.

No Output

| Ensure that the DC/USB/AC output ports are activated by pressing the DC/USB/AC OUTPUT ON/OFF BUTTON(S) for the port(s) in use.| Once the corresponding button (s) is pressed, the output Watts will show on the LCD screen.
Check the connected cables are appropriately inserted into the devices and power station.|

Confirm the connection condition.

Confirm the power station is charged by reviewing the battery level.| Low battery will affect the outputs.
**** Verify the watt data displayed on the LCD screen for an overloadcon d i tion.| Overload will shut off the outputs (For more information, please see the error codes section).

Suddenly Interrupted When Using Output (s)

|

• The power used by the electronic device exceeds the rated power of this product.
• Check if the connected device (s) is suitable for the power station by reviewing the output  specifications in the GENERAL SPECIFICATIONS section.

| Only plug in devices that DO NOT exceed the rated Watts. If you need a unit with a larger watUhour capacity, you can either go to our website or contact customer service to see which unit is right for you.
Check to see if the output power is low. If it is too low for some hours, the power station will automatically shut down. Please press the ON/OFF button to start the product.| Automatic shutdown for  saving power
If you do not want the function, press the ECO button to turn it off.
Check if it turns off automatically in case of the protection, lick overcurrent, over/under temperature , overloading, etc. If so, just press the power  ON/OFF button to resume after the power station turns normal.| **** Several protections to ensure the safety use of power station.

If you are experiencing any other problems not listed above, please contact customer service for help.

WARNINGS
The warnings in this manual cannot cover all possible conditions or situations that could occur.
Please use the POWER STATION with common sense and caution. Always be aware of the environment around you while using the device and ensure the POWER STATION is being used safely and responsibly.

• DO NOT use the POWER STATION over its output rating. Overloading may risk instances of fire or personal injury, even though we have built-in overload protection.

• DO NOT use the POWER STATION or AC Wall plug power adapter if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion,
  or risk of injury.

• DO NOT subject to vibration, impacts, or drops. Secure the POWER STATION during transport. The housing may not show signs of damage, but internal components may have been compromised. It is advisable to replace it if any such severe events occur.

• DO NOT expose the POWER STATION to moisture, rain, or snow.

• DO NOT charge, use or store the POWER STATION in a bathroom or an area exposed to water, rain, or moisture.

• DO NOT leave children or persons with reduced physical/sensory or mental capabilities/or
  lack of experience and knowledge, along with the POWER STATION, unless they have been given supervision or instruction concerning use of it by a person responsible for their safety.

• DO NOT attempt to repair the POWER STATION or AC Wall plug power adapter.
  There are no user-serviceable components inside.

• DO NOT handle the POWER STATION with wet hands.

• DO NOT place the POWER STATION on its side or upside down while in use or storage.
  If rust, odor, overheating, or other abnormal circumstances are observed, stop using and contact customer service.

• Children should be supervised to ensure that they DO NOT play with the POWER STATION alone.

• The POWER STATION is only used for the emergency power station. It cannot always replace the standard AC or DC power of household appliances.

• Keep away from high voltage electrical fields.

• Risk of fire and burns. DO NOT open, crush, or heat above 104 ° F (40°C) or incinerate.

• Use of a power supply, charger, or cable not recommended or sold by portable battery manufacturers may risk fire or injury to persons.

• Should fluid from the inside of the POWER STATION come in contact with your skin or clothing, wash the affected areas with water.

• The accessories included in the box should only be used with the POWER STATION.

• KEEP POWER STATION AWAY FROM PETS.

CAUTIONS
Transportation: POWER STATION complies with all legal requirements for the transport of dangerous goods. The capacity of the lithium battery pack exceeds 100Wh. Based on international standards, if POWER STATION is transported by airplane, it must be transported by lATA standard packaging. IATA instructions and labeling requirements and the relevant declarations must be completed.

Product Disposal
In accordance with European Directive 2012/19/EC on waste electrical and electronic equipment
(WEEE): when it has to be scrapped because it has become unusable or for any other reason whatsoever, this product cannot under any circumstances be treated as household waste. To safeguard the environment and to minimize harmful impact on the environment, carefully follow recycling procedures or when disposing of the product, taking it to a local waste collection centre or any other authorized treatment centre. If in doubt, contact the local authorities responsible for collection and treatment, who will inform you about possible solutions for recycling and/or treatment.

Intended use
PPS500 is mainly used for charging electronic devices. The maximum power consumption of electronic devices is 500W. Our product is not suitable for use with medical equipment, nuclear facility equipment, spacecraft manufacturing and other equipment. So, we do not assume any responsibility for accidents related to personal safety, fires, or machine malfunctions caused by the use of our products with the aforementioned equipment.

DECLARATION OF CONFORMITY

• We:
• IN & OUT HOUSE GmbH
• Landrat-Kaptain-Str. 51
• DE – 52372 Kreuzau
• Product: PORTABLE POWER STATION
• Identification: PPS500
• Tested acc. to:
• EN 303417 V1.1.1:2017
• EN 50665:2017
• EN IEC 62311:2020
• EN 301489-3 V2.1.1:2019
• EN 301489-1 V2.2.3:2019
• EN 61547:2009
• EN IEC 55015:2019+A11
• EN IEC 61000-6-3:2021
• EN IEC 61000-6-1:2019
• EN 62368-1:2014+A11
• IEC 62321-3-1:2013
• IEC 62321-4+AMD1:2017
• IEC 62321-5:2013
• IEC 62321-6:2015
• IEC 62321-7-1:2015
• IEC 62321-7-2:2017
• IEC 62321-8:2017

The subject of the declaration described above complies with the provisions of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Product model: PPS500 meets the provisions of Directive 2014/30/EU, 2014/35/EU, 2014/53/EU, 2011/65/EU and 2015/863/EU which apply to them.The product concerned has been manufactured under a quality management system according to the Directive 2014/30/EU, 2014/35/E, 2014/53/EU and RoHS Directive 2011/65/EU and 2015/863/EU. Compliance of the product with Directive
2014/30/EU, 2014/35/EU, 2014/53/EU, 2011/65/EU and 2015/863/EU have been assured via assessment of the quality management system by the Notified body:
TÜV Rheinland (China) Ltd.
Certificate No.: AK 50578035 0001
Issue date: 13.03.2023
TÜV Rheinland (China) Ltd.
Certificate No.: AK 50578035 0002
Issue date: 13.03.2023
Shenzhen Deesev Testing International Corporation (DTI)
Certificate No.: DTIBW20212540BDC
Issue date: 29.08.2022
Following the procedure relatlng to the Declaration of Conformity set out in TÜV Rheinland (China) Ltd. and Shenzhen Deesev Testin international Corporation (DTI). This Declaration of conformity is valid in connection with the release document for the respective batch of produced devices.The above mentioned declaration of conformity is exclusively under the responsibility of
Company: IN & OUT HOUSE GmbH
Address: Landrat-Kaptain-Str. 51, DE – 52372 Kreuzau, Germany

Download current instruction manual

IN & OUT HOUSE GmbH | Landrat-Kaptain-Straße 51 | 52372 Kreuzau info@in-out- house.de | Desianed in Germany. Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>