nJoy TC2421IX 100 Ah DIY Battery Cabinet Installation Guide
- June 4, 2024
- NJOY
Table of Contents
Ah DIY Battery Cabinet
Installation Guide
Before using this product, carefully read all product documentation and retain
it for future reference.
Thank you for purchasing our products! Please read this manual before using
the product.
Focusing on quality at competitive prices, here at nJoy, we are creating
innovative and reliable power protection solutions for every customer in
casual, business and industrial environments.
This EBM together with the UPS will protect your electronic equipment from
physical damage and will provide emergency battery backup power to prevent
data loss in the vent or power problems. nJoy UPS models that are compatible
with this EBM model: Ranger Series 120KT / 180KT
Installation and assembly of the cabinet
Step 1
Assemble the first parts of the cabinet in the order shown.
Step 2
The breaker cover has two parts. Begin with the lower part (shown in the
picture as B).
Step 3
Fix the breaker on the corresponding part.
Step 4
Assemble the component on the back of the cabinet.
For complete information on the cables used for this battery cabinet, please refer to the table bellow:
No.| Name| Description| Length (cm)| Quantity
(pcs)| Observations
---|---|---|---|---|---
1| 1| Battery to Battery 2x AWG 1/0| 35| 32| Ring 8.4mm to
Ring 8.4mm
2| 2| Battery to Battery 2x AWG 1/0| 50| 6| Ring 8.4mm to
Ring 8.4mm
3| BAT+| Battery to Breaker pozitive (+)Pole 2x AWG 1/0| 80|
1| Ring 8.4mm to Ring 10.4mm
4| BAT-| Battery to Breaker negative (-) Pole 2x AWG 1/0| 180|
1| Ring 8.4mm to Ring 10.4mm
5| N1| Battery to Breaker neutral N1 Pole 2x AWG 1/0| 60|
1| Ring 8.4mm to Ring 10.4mm
6| N2| Battery to Breaker neutral N2 Pole 2x AWG 1/0| 180|
1| Ring 8.4mm to Ring 10.4mm
7| BAT +| Cabinet to Cabinet 2x AWG 1/0| 150| 1| Ring
10.4mm to Ring 10.4mm
BAT N| Cabinet to Cabinet 2x AWG 1/0| 150| 1| Ring 10.4mm to Ring
10.4mm
BAT –| Cabinet to Cabinet 2x AWG 1/0| 150| __ 1| Ring 10.4mm to Ring
10.4mm
NOTE!
The cable numbering corresponds to the ones on the connection diagram and on
the illustrations.
Each cable in the battery cabinet consists of two cables linked to the same
connector.
Step 6
Assemble the components for the second level and place 10 batteries on the
trays.
Step 7
Assemble the components for the third level and plac10 batteries on the trays.
Step 8
Assemble the components for the fourth level and place 10 batteries on the
trays.
Step 9
On the back of the cabinet wires should be connected to the breaker as shown
in the image.
NOTE!
There are a total of 4 cables that connect to the breaker from the battery
side of the cabinet, and 3 cables that connect to the breaker from the UPS (or
another cabinet) side.
All the cables shipped with the cabinet are black. We used colors on this
manual to make the connection diagram and illustrations easier to understand.
Step 10
Assemble the rest of the panels on each side of thecabinet.
Step 11
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
collection systems).
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused y inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.