PowerPac IF3266 Air Purifier Hepa Filter Instruction Manual

June 13, 2024
PowerPac

AIR PURIFIER HEPA FILTER
IF3266

IF3266 Air Purifier Hepa Filter

Parts & Description

LIST OF COMPONENTS

1. Front Cover
2. Filter
3. Air Outlet| 4. Control Panel
5. Air Inlet
6. UV-C Light| 7. Main Body
8. Dust Tray
9. Mosquito Tray
---|---|---

Control Panel’s Buttons and their Functions

Button Function Steps
Timer Touch the Timer button in the Standby state to set the duration of

2h, 4h or 6h.
| Power| Touch the Power button to ON or OFF the appliance.
On Start-up, the Ambient Light and Negative Ion Generator are turned on by default.
| Wind Speed| Touch the Wind Speed button to adjust the fan speed.
| Mosquito Catching Function| During operation, press and hold the Timer + Wind Speed buttons together for 3s to turn on/off the Mosquito Catching Function.
| Ambient LED light| During operation, press and hold the Timer button for 3s to turn on/off the Ambient LED light.

Warnings

ATTENTION:
Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical appliances:

  1. Read all instructions before using the appliance.
    The Appliance

  2. This appliance must be used only for the purpose it was expressly designed; any use NOT complying with the instructions contained in the manual is considered inappropriate and dangerous. The manufacturer is NOT responsible for possible damages caused by the inappropriate and/or unreasonable use.

  3. The installation/assembly of the appliance will be made in accordance with the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.

  4. Before use, check the integrity of the appliance and power cable. DO NOT operate the appliance when its Motor Unit is damaged. In case you are not sure, contact a qualified person. If the power cable is damaged, it must be replaced by the manufacturer or its service agent, or a qualified technician in order to avoid a shock hazard.

  5. Before powering the appliance make sure the rating (voltage and frequency) corresponding to the grid and the socket is suitable for the plug of the appliance, and that the wall socket is properly grounded.

  6. Avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only materials in compliance with the current safety regulations and according to the electrical parameters of the adapters.

  7. The appliance must NOT be switched on using external timers and/or other remote control appliances which are not specified in this manual.

  8. Only use original components & accessories provided by the manufacturer. Any non-original component or accessory (e.g. Filters, etc.) NOT recommended by the manufacturer (including those made by other manufacturers or by the same manufacturer but for other models) may cause injuries to persons or damage to the appliance.

  9. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger.
    Location

  10. This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air). Items containing these substances should never be placed in the appliance, and never be used to clean the appliance in order to avert the risk of fire or explosion.

  11.  The appliance should NOT be placed on a surface, or in the vicinity of, objects which can be damaged by heat, such as carpets or plastics. DO NOT locate multiple portable socket outlets or power supplies at the bottom or rear of the appliance. During operation, as heat is transferred away from the appliance, the surface that the appliance is placed upon as well the surface immediately above or adjacent to it may become very hot. If the appliance is operated on wooden furniture, use a protective pad to prevent damage to delicate finishes. There should be at least 20 cm of free space from the back, left & right sides, and the top of the appliance to allow adequate air circulation. Never put things on top of the appliance.

  12. Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily. Avoid placing heavy objects on the cable. The cable must NOT be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from the high traffic area, and where it will NOT be tripped over. DO NOT pull or carry the appliance by the cable.

  13. DO NOT operate the appliance next to an open window while it is raining. Rainwater splashing onto the appliance may cause an electric shock.

  14. DO NOT use or store the appliance outdoors. Store and use the appliance only indoors, or in any case, protected from weathering such as rain, direct radiation of the sun and dust.
    Operation

  15. If you are using the appliance for the first time, you should:
    a. Clean the exterior parts of the appliance with warm water & dish-washing agent with a soft cloth and wipe dry. DO NOT use metal scouring pads. Make sure that the Motor Unit DOES NOT come into contact with water.
    b. Check that the Air Outlet and Fan Blades are NOT damaged.
    c. Hold both sides of the Front Cover and slide the Front Cover upwards. The Front Cover detaches from the Main Body. Take out the Filter and remove the plastic bag around the Filter.
    Remove the Styrofoam protection below the Motor Unit and above the normal position of the Filter in the Main Body.
    Replace the Filter in the correct position in the Main Body.
    Operate the appliance with the Filter inserted (without the plastic bag), the Styrofoam protection removed and the Front Cover locked in place.
    d. Place the appliance upright on a horizontal, stable, dry and heat-resistant surface. Damage may occur if the appliance is placed on an incline or decline.
    e. To turn ON: Insert one end of the power cable into the socket at the back of the Main Body and the plug of the power cable directly into the wall socket and switch ON. Ensure that the plug fits tightly into the socket. Touch the Power button to switch the appliance ON.
    f. On Start-up, the Ambient Light and Negative Ion Generator are turned on by default.
    g. (optional) Touch the Wind Speed button for the Fan speed you desire (Low – 1, Mid – 2, High – 3).
    h. To turn OFF: Touch the Power button to switch the appliance OFF.
    i. Make sure to remove any label or protective sheet which may prevent its proper functioning.
    DO NOT:
    • use the appliance without the Filter in place, or without removing the plastic bag around the Filter;
    • operate the appliance in a room (or location) with high air humidity, such as a bathroom, shower or swimming pool, as moisture can accumulate in the appliance and cause an electric shock;
    • cover the appliance during functioning;
    • obstruct totally nor partially the Air Inlet & Air Outlet;
    • place the appliance on a soft surface such as a mattress, pillow, cushion or sofa, as this could cause the appliance to tip over, blocking the Air Inlet & Air Outlet;
    • insert objects or body parts (including clothing and hair) through the Air Inlet/Outlet to avoid personal injury or damage to the appliance when in operation. The blades are rotating at very high speeds, which may lead to injury to your fingers and hands;
    • attempt to force the fan blades to turn or stop the blades from turning, which may lead to the motor overheating. If the motor is operating, but the Fan Blades do not move, switch the appliance off;
    • touch the power, Timer or Wind Speed buttons too forcefully;
    • use the appliance near curtains or textiles;
    • use the appliance to dry wet clothes;
    • use any spray (e.g. pesticides, insecticides, etc.) in the room;
    • add aromatic oil to the Filter;
    • use any of the following agents as a cleaner: alcohol, gasoline, thinner, or benzene;
    • operate the appliance at temperatures lower than 0 °C or higher than 40 °C, and operate the appliance for more than 6 hours without turning it off for at least 30 minutes to let the appliance cool down for a total usage of 12 hours a day – failure to heed this warning may result in motor failure;
    • leave the appliance unsupervised during operation.

  16. During operation, DO NOT touch the appliance with wet body parts, and it is recommended to have between you and the standing surface, an isolating element (for example, wearing shoes with rubber soles).

  17. DO NOT soak the appliance (especially the Motor Unit) in water or other liquids, wash it under the tap, or let any liquid flow into the internal casing of the appliance to prevent electric shock. In case of accidental fall in water, DO NOT try to take it out, but first of all switch OFF the appliance.

  18. Switch the appliance OFF before unplugging the appliance. Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power cable to avoid overheating and if it is NOT used for a long period, before storing, assembling & disassembling, cleaning or performing any maintenance operation. Before storing, cleaning or maintenance operations, leave to cool for 30 minutes.

  19. In case of malfunction or anomaly during the functioning, switch the appliance OFF immediately, turn off the power and check the cause of the anomaly, if possible, with the support of a qualified person.

  20. If smoke is observed coming out of the appliance, switch the appliance OFF & detach the plug of the power cable from the wall socket immediately.

  21. This appliance is NOT intended for commercial use but to be used in households and similar applications, such as:
    • Staff kitchen areas in shops, offices & other working environments;
    • By clients in dormitories, hotels, motels & other residential environments;
    • Bed and breakfast type environments.

  22. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall NOT play with the appliance. Cleaning and user maintenance shall NOT be made by children unless they are older than 8 and supervised. Keep the appliance and its cable out of reach of children less than 8 years old.

  23. Save these instructions.

HOW TO USE

Operating the Air Purifier

  1. Place the appliance upright on a horizontal, stable, dry and heat-resistant surface. DO NOT place the appliance on a soft surface such as a mattress, pillow, cushion or sofa, as this could cause the appliance to tip over, blocking the Air Inlet & Air Outlet.
  2. Insert one end of the power cable into the socket at the back of the Main Body and the plug of the power cable directly into the wall socket and switch ON. Ensure that the plug fits tightly into the socket.
  3. Touch the Power button to switch the appliance ON.
  4. During operation, the Ambient LED Light and Negative Ion Generator are turned on by default. The appliance works as an air purifier by releasing negative ions into the surroundings.
  5. To turn off (or on again) the Ambient LED Light, press and hold the Timer button for 3 seconds.
  6. (optional) Touch the Wind Speed button for the Fan speed you desire (Low – 1, Mid – 2, High – 3).
  7. (optional) To turn on (or off) the Mosquito Catching Function, press and hold the Timer + Wind Speed buttons together for 3 seconds.
  8. (optional) You can select the desired time for the appliance to operate for 2 hours, 4 hours or 6 hours if you wish. Press the Timer button once for 2 hours, twice for 4 hours and 3 times for 6 hours.
  9. Touch the Power button to switch OFF (or switch ON again) the appliance.
  10. Unplug the power cable from the wall socket when not in use and before cleaning or replacing the Filter, or cleaning the appliance.

CLEANING

  1. When the service life of the Filter has expired, the appliance emits three beeps “ding”~ “ding”~”ding”~ and the 3 buttons of the Control Panel keep flashing.

  2. Touch the Power button to switch the appliance OFF. Unplug the power cable from the wall socket when not in use and before cleaning or replacing the Filter, or cleaning the appliance.
    Removing and Inserting the Filter

  3. Hold both sides of the Front Cover and slide the Front Cover upwards. The Front Cover detaches from the Main Body.

  4. Remove the Filter. Wrap the Filter with a plastic bag to avoid pollutants falling to the floor.

  5. If the appliance is being operated for the first time, remove appliance for the first time, remove the Styrofoam protection below the Motor Unit and above the normal position of the Filter in the Main Body.

  6. The Filter consists of 3 filters: Preliminary Filter, HEPA Filter and Charcoal Filter.
    It is recommended to clean the Filter once every month. If the operating environment is poor, the cleaning frequency should be increased. If the Filter is blocked, it will lead to poor air purification, increase the power consumption and eventually lead to the breakdown of the appliance.
    Note: due to the different pollution levels of the actual environment, the life cycle of each Filter will be different. In households with a large number of smokers, the Filter replacement cycle may be shortened to once in every 6 months. If bad odours are released from the Air Outlet, it means that the Filter’s filtration and adsorption volume is saturated. The Filter should be cleaned first and if there is no improvement, it should be replaced.

  7. The Filter is either cleaned if it had not reached its replacement cycle, or thrown away if it has. Please note that a Filter that reaches its replacement cycle cannot be used even if it is cleaned up. Please treat it as non-combustible waste.

  8. Use a vacuum cleaner to clean the surface dust on the Filter when the surface is dusty, which can extend the service life of the Filter. The vacuum cleaner can also be used to suck up dirt from the Air Inlet and Air Outlet.
    Note: The Filter that has reached the replacement cycle cannot be reused even if it is clean. Please dispose of it as non-combustible garbage.

  9. If a new Filter is required, take the new Filter out of the plastic bag. Place the new/cleaned Filter in the correct position in the Main Body.

  10. After the Filter is replaced, reset the Filter reminder; press and hold the Timer + Power buttons together for 3 seconds to reset the Filter life timer.
    General cleaning

  11. Clean the exterior parts of the appliance thoroughly with warm water (below 40°C) & dish-washing agent and a damp cloth, and immediately wipe dry. Take special care that the Control Panel is kept dry and that the Motor Unit DOES NOT come into contact with water.
    DO NOT use a scrubbing brush.
    DO NOT use any of the following agents as a cleaner: gasoline, thinners, or benzene.

  12. Never run water over the appliance as malfunctions may occur if water seeps inside the appliance.

Problem Solving

If your air purifier is not working properly, please check the following before sending it for repairs.

Problem Possible Causes How to Solve
The appliance does not work The plug is not properly inserted into the wall
socket. Insert the plug into the wall socket. Do not use adaptors or

extensions.
The wall switch is not switched on.| Ensure that the wall switch is switched on.
The motor has overheated.| Disconnect the power cable from the wall socket and leave the motor to cool.
The power cable is defective.| Have the power cable replaced at the authorised Service Centre.
Lack of power.| Check that the power cable is not loose.
Motor or PCBA breakdown.| Have the appliance checked at the authorised Service Centre.
The Filter had not been installed correctly in position, and is preventing the Front Panel from closing.| Remove the Front Cover and check the alignment of the Filter.
If needed, re-install the Filter.
Close the Front Cover.
Bad odours are released from the Air Outlet of
the appliance| The Filter’s filtration and adsorption volume is saturated.| Have the Filter replaced.
The odour concentration of the indoor air is too high.| Open nearby windows for ventilation, and check if the bad odour is emanating from the appliance itself.
The purification effect is not significant, and
the air quality is not significantly improved| The Filter had not been installed.| Install the Filter.
The appliance is tucked within narrow confines or near obstacles that affect the ability of the appliance to draw in air.| Place the appliance on a flat, stable surface or remove the obstacles.
The Filter is too dirty.| Clean or replace the Filter.
The appliance is too noisy| Foreign objects have fallen into the appliance.| Check to see whether there is any blockage, and if so, attempt to remove them. If the foreign object(s) is wedged too deeply, bring the appliance to the authorised Service Centre.
The appliance has been situated on uneven ground.| Place the appliance on a flat, stable surface.
The parts may have been incorrectly assembled.| Check to see whether the Filter or parts around it had been incorrectly re-positioned during the last replacement or cleaning.
The Fan speed is set too high.| Set a lower speed.
The Filter is too dirty.| Have the Filter replaced.
The Filter is being installed upside down.| Adjust the correct orientation of the Filter and align it with the bottom slot.

ENVIRONMENTAL TIP

This appliance, along with all other electronic appliances, should, when it is no longer capable of functioning, be disposed with the least possible environmental damage according to the local regulations in your area. In most cases you can discard the appliance at your local recycling center.
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

SPECIFICATION

MODEL / FILTER IF3266 / IF3266FIT
RATED VOLTAGE & POWER 220 – 240 V  ~50 – 60 Hz   24 W
NEGATIVE ION OUTPUT 10 million per cubic metre
CLEAN AIR DELIVERY RATE 200 cubic metres per hour
COVERAGE AREA 20 – 30 square metres
DIMENSIONS (APPLIANCE) 205 (L) x 205 (D) x 386 (H) mm

8.1 (L) x 8.1 (D) x 15.2 (H) inch
DIMENSIONS (FILTER)| 100 (L) x 100 (D) x 207 (H) mm
3.9 (L) x 3.9 (D) x 8.2 (H) inch

WARRANTY

Warranty Conditions

  1. This warranty provides against defective materials and manufacturing faults throughout for two years from the date of purchase of the appliance. The warranty on the Compressor is 10 years subject to the same conditions as above.
  2. This warranty also does not cover normal wear and tear, replacement of consumable materials and accessories, and the cost of maintenance of the appliance.
  3. This warranty does not cover the repair or replacement of part/s damaged by misuse, accidents, negligence, alterations, or modifications in any way, or repairs done by any repair organisation without the prior consent of PowerPac Electrical Pte Ltd.
  4. Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045. A transport fee will be charged for personal doorstep service.
  5. The original purchaser of the appliance must furnish proof of purchase to our Service Centre with the email or number as registered during submission of warranty when this appliance is sent for repair/service. Failure to do so may delay the receipt of said repair/service by the customer.
  6. Under no circumstances whatsoever shall the serial number be erased, defaced or altered by the customer and/or his representatives, or the dealer and/or his agents. Failure to ensure this shall invalidate the warranty.
  7. This warranty is deemed to be void if the defect is cause by the attack of household pests, fire, lightning, natural disasters, pollution, abnormal voltage or the usage of generators.
  8. This warranty is valid in Singapore only.
  9. This warranty will be honoured subject to the customer’s registration of the warranty inclusive of original invoice or valid purchase receipt. Failure to present these documents will result in denial of service. However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
  10. Please refer to the attached picture for the location of one of our appliance’s serial number, as an example.

Please complete the on-line registration warranty form available on our website.
There is no further requirement to send us any hard copy as part of our efforts to save the environment.
In accordance with the terms and conditions of this limited warranty as stated above, PowerPac Electrical Pte Ltd, at its expense shall provide free services for the appliance within the warranty period from its date of purchase from our Authorised dealers.

PowerPac Electrical Pte Ltd
sales@powerpac.com.sg
www.powerpac.com.sg
PowerPacSG
@powerpacsg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals