BAHCO BH1EU3000 Trolly Jack Instruction Manual

June 4, 2024
BAHCO

BH1EU3000 Trolly Jack
Instruction Manual

BAHCO BH1EU3000 Trolly Jack

BH1EU3000 Trolly Jack

BAHCO BH1EU3000 Trolly Jack - Fig 1

BAHCO BH1EU3000 Trolly Jack - Fig 2BAHCO
BH1EU3000 Trolly Jack - Fig 3BAHCO BH1EU3000 Trolly Jack - Fig
4BAHCO BH1EU3000 Trolly Jack - Fig 5

Ref| | MAX
(mm)| MIN
(mm)| A| B| C|   D
---|---|---|---|---|---|---|---
BH1EU3000| 3000| 462| 130| 119| 157| 1400| 617

Warnings:

  1. Study, understand and follow all instructions before operating this jack.

  2. Do not exceed rated capacity.

  3. Use only on hard-level surfaces.

  4. Do not move or transport the vehicle while on the jack.

  5. Lifting device only. Immediately after lifting, support the vehicle with support stands.

  6. Lift only on areas of the vehicle as specified by the vehicle manufacturer, and only centrally on the lifting saddle.

  7. No person shall remain in, on, or get bodily under a load that is being jacked or is supported only by a jack.

  8. Only original accessories and spare parts shall be used.

  9. No alterations shall be made to this jack.

  10. Failure to follow these warnings may result in personal injury and/or property damage.

  11. Maintenance and repair must always be carried out by qualified personnel.
    a. Daily: Inspect jack for damages.
    b. Monthly: Lubricate all mechanical parts with a few drops of oil.

  12. Trouble shootings:
    a. The jack does not lift to maximum position: refill with oil ISO VG15.
    b. The load is dropping due to leaking pump valves or worn seals: Contact your distributor.

  13. According to national legislation – a minimum of once a year through – the jack must be inspected by a professional: damages, wear and tear, adjustment of the safety valve, and hydraulic unit for leakages.
    Possible faults and how to overcome them.

  14. Disposal: Oil must be drained off and legally disposed of.

EC DECLARATION OF CONFORMITY

SNA Europe SAS
BP 20104 Eragny
F.95613 Cergy Pontoise- France

Hereby declares that./ The device:

Type(S) BH1EU225 Product Hydraulic jack Year 2015

Was manufactured in conformity with the provisions in the:

2006/42/EC +BS EN1494

A person authorized to compile the technical file:| SERGIO
CAL VO
Quality manager
NA Europe SAS
BP 20104 Eragny
F.95613 Cergy Pontolse­
Franc
Date 01/11/2015
---|---

WWW.SNAEUROPE.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals