CAT C20T Auto Floor Scrubber with Traction Drive User Manual

C20T Auto Floor Scrubber with Traction Drive

User Manual
C20T
Auto Floor Scrubber with Traction Drive, 20″ Cleaning Path
Model 641746
GLOBALINDUSTRIAL.COM US: 1-800-645-2986
Canada: 888-645-2986

C20T

Model 641746

WARNINGS

PLEASE READ THE INSTRUCTIONS CAREFULLY PRIOR TO USING THIS PRODUCT.
WARNING – to reduce the risk of fire, electrical shock, and/or injury/damage to persons or property:
· DO NOT operate the machine unless trained and authorized. · The charger must be plugged into a 3-prong grounded outlet. · DO NOT use flammable materials in the tank or as a cleaning agent in the machine. · DO NOT use the machine to clean up flammable or combustible spills. · Always turn off and unplug the machine prior to setting up the machine, performing routine
maintenance, or when not using the machine. · DO NOT operate the unit if the cord/plug is damaged. · DO NOT place objects on the unit or allow objects to obstruct the inlets or outlets. · DO NOT expose unit or power cord to moisture. · DO NOT attempt to fix the machine by yourself. All repairs must be made by authorized
personnel. · DO NOT modify the machine. · DO NOT touch moving parts. DO NOT wear loose fitting clothing while using or servicing
the machine. · DO NOT operate on inclines. · DO NOT use an extension cord. · DO NOT use your fingers to remove debris from the squeegee rubber blades, as injuries
may occur. · Foam must not enter the Shut-off Float or damage can occur to the vacuum motor. Foam
will not activate the machine’s Shut-off Float device. · This machine is intended for commercial and indoor use only. · Empty the Solution and Recovery tank before storing the machine. · Always empty Recovery tank before filling solution tank. · Store the machine indoors only.

1

C20T

Model 641746

TECHNICAL SPECIFICATIONS

Cleaning Width Squeegee Width Coverage Efficiency Brush Pressure Brush RPM Brush Motor Suction Motor Traction Motor Drive Speed Solution Tank Recovery Tank Machine Dimensions (Excluding Squeegee) Battery Battery Weight Machine Weight Total Weight (Machine, Battery, and Charger)

20″ 30.7″ 24218 sq. Ft/hr. 62.95lbs/100 lbs. 220 24V/550W 24V/390W 24V/180W 0-2.8 miles/h 14.6 gallon 17.2 gallon 51″ x 21.65″ x 40.6 “(L x W x H) 2 x 120Ah 85.8lb x 2 276 lbs. 408 lbs.

Model # RP6414 262000 262001

Replacement Parts Item
Charger 24V Front Rubber Squeegee Blade Rear Rubber Squeegee Blade

Contact Global Industrial for replacement batteries.

2

C20T

Model 641746

MACHINE COMPONENTS

1. Recovery Tank Cover 2) Solution Tank Cap 3) Solution Tank 4) Pad Driver/Brush Head Assembly 5) Rubber Skirt

2. Wheel 7) Recovery Tank 8) Dirty Water Outlet 9) Debris Filter 10) Shut-off Float

3. Recovery Tank Handle 12) Suction Motor 13) Batteries

3

C20T

Model 641746

31

14. Power Button 15) Recovery Tank Drain 16) External Charging Port 17) Squeegee Lever 18) Pad Driver/Brush Handle 19) Pad Driver/Brush Foot Pedal

15. Water Level Indicator 21) Squeegee Assembly 22) Vacuum Hose 23) Solution Drain Plug 24) Water Flow Ball Valve 25) Cup Holder

16. Phone Holder 27) Left Drive Switch 28) Emergency Stop 29) Right Drive Switch 30) Touchscreen 31) Pad Driver/Brush

4

C20T

Model 641746

MACHINE SET UP

Package Contents: 1. Machine 4. Jumper cable & battery connector plug 2. Charger 5. Battery

Controller Plug

Jumper Cable

3. Pad Driver 6. Squeegee Assembly

Machine set-up prior to each use

1. Connect the 24V batteries.

a. Connect the batteries in series using the included jumper

cables to the positive (+) and negative (-) poles. b. Connect the Battery Connector Plug to the Controller Plug 2) Attach the Squeegee Assembly. See Squeegee Assembly Installation.

External Charging Port Cable

Battery Connector Plug

3. Attach Pad Driver and Scrubber Pad or Scrub Brush. See

Pad/Driver Brush Installation.

4. Ensure the walking-working surfaces can support the

maximum weight of the machine.

5. Always close Recovery Tank cover fully before use.

Charging the batteries 1) Turn off the power of the machine; 2) Connect the charger to the External Charging Port on the back of the machine. 3) Connect the charger to the power supply. If the indicator light on the Charger is red, there’s a fault. If the indicator light is a steady yellow, the battery is charging. If the indicator light flashes yellow, there is no connection. If the indicator light is green, the battery is fully charged.
WARNING RISK OF EXPLOSION: Keep sparks and fires away from the batteries at all times. Batteries emit hydrogen gas and an explosion or fire can occur. Avoid short circuits.
· Leave the battery compartment open while charging. · Use only Global Industrial approved chargers with output current of 10-20 amps, output
voltage of 24 volts, an automatic shut off circuit, and deep cycle charging. · DO NOT place the battery charger on wet surfaces. · DO NOT tilt the battery as acid may flow out of the vent openings. · Battery acid is highly caustic. Always wear protective gloves and eye protection. CAUTION For the best performance, keep batteries charged at all times. DO NOT store batteries while they are empty. Wear eye protection.

5

C20T

Model 641746

SQUEEGEE ASSEMBLY INSTALLATION

1. Disconnect the power. 2. Loosen the 2 knobs on the Squeegee
Assembly. 3. Connect the Vacuum Hose to the Vacuum
Hole in the squeegee assembly. 4. Align the knobs on the Squeegee
Assembly with the slots and tighten the knobs.

Vacuum Hose Squeegee Assembly Knobs

POWERING ON AND OFF

Press the power button for 2 seconds. The touch screen will turn on and a password screen will

open.

Enter the password on the Touchscreen. The preset password is

0000. Press enter to log in.

If needed, press backspace

and re-enter the password. When

the password is incorrect, a pop-up will notify you that the password

submitted is incorrect. If the wrong password is entered five times,

the system will be locked for 5 minutes.

If you don’t remember the password, please contact Global Industrial at 1-800-645-1232.

Press the power button for 2 seconds to turn off the machine.

Touchscreen

1. Fault/Error Display 2. Settings 3. Running Time Display 4. Uninstall Pad
Driver/Brush 5. Water Flow Display 6. Water Flow Button 7. Brush On/Off Button 8. Drive Display 9. VAC ECO Mode Button

10. Vacuum On/Off Button 11. Date and Time Display 12. Remaining Battery 13. Forward Button
14. Neutral/Park Button 15. Drive Speed Display 16. Drive Speed Button 17. Backward Button

6

C20T

Model 641746

PAD DRIVER/BRUSH INSTALLATION

1. Power off the machine.

2. Place the Pad Driver/Brush under the head assembly.

3. Lower the head assembly to the floor by stepping on the Pad

Driver/Brush Foot Pedal, guiding it to the right, and letting it rise

to the middle position. Remove your foot from the pedal.

4. Line up three studs on top of the Pad Driver/Brush to the holes on

the head assembly. Lift up the Pad Driver/Brush to

insert the three studs into the holes of the head

assembly and turn clockwise to lock them.

5. Power on the machine. Lower the driving speed to the lowest by using the Touchscreen.
6. Press the drive button to make the Pad driver/Brush lock in completely.

Pedal

Handle

Lowest position

SOLUTION TANK

Middle position

1. Remove the solution tank cap and fill with clean water for regular cleaning. Contact Global Industrial (1-800-645-1232) for recommendations on proper cleaning solutions for various surfaces.
2. Check water level indicator for water level.

Water Level Indicator

7

C20T

Model 641746

OPERATION

Traction Drive – This machine is equipped with electronic traction control · Press the Driving Speed button or slide your finger along the Driving Speed Display

Section to adjust the driving speed of the machine.
· Press the Forward button to drive forward. Press the Left and Right Drive Switches to drive the machine.
· Put the machine in Neutral to switch between Forward or Reverse. Press the Neutral button to park the machine. Always leave the machine on Neutral when not using the machine to prevent accidents.
· Press the Reverse button to drive backwards. The safety buzzer will go off. Press the Left and Right Drive switches to drive the machine.
· To move the machine without the power on, locate the red Brake Lever by the left wheel. Pull the Brake Lever clockwise to release the automatic brakes. DO NOT leave the Brake Lever released during normal use. Always pull the Brake Lever back counterclockwise to enable automatic braking before using the machine to prevent accidents.
· Press the emergency stop button to quickly stop the machine. To deactivate the emergency stop and start the machine again, turn the emergency stop button clockwise.

Locking

Releasing

Emergency stop

8

C20T

Model 641746

Using the Pad Driver/Brush The Pad Driver/Brush Foot Pedal can adjust the Head Assembly to 3 various levels. 1. To lift the Pad Driver/Brush off the floor, lift up the Pad Driver/Brush Handle and guide the
handle to the right to disengage the Pad Driver/Brush Pedal. Push the handle or foot pedal down and guide it to the left to lock it at the lowest position. 2. To use the Pad Driver/Brush, step on the Pad Driver/Brush Foot Pedal to loosen it, guide it to the right, and let it rise to the middle position. Remove your foot from the pedal. This will

place the brush onto the floor and apply 77 lbs. of pressure. Press the Brush button

on

the Touchscreen to turn on the Brush Motor. The Brush Motor will automatically rotate when

the machine is moving forward or backwards. Press the Brush button to turn off the Brush

Motor.

3. To increase the pressure of the Pad Driver/Brush to the maximum of 110 lbs., first adjust the

Star Nut located on the front of the machine above the Pad Driver/Brush. Turn the Star Nut

counter-clock wise until the spacing between the Star Nut and the round black nut is at least

0.4” (10 mm). Tighten the black round nut by rotating it clockwise. Then set the Pad

Driver/Brush Foot Pedal to the highest position by pulling the Pad/Driver Brush Handle up and

to left.

Handle

Star nut

Pedal Lowest position

Middle position

Highest position

Spacing Round black nut

WARNING: It is necessary to hold the machine body with both hands while the brush pressure is increased to prevent accidents. Press the Emergency Stop Button in case of emergency.

Removing the Pad Driver/Brush
1. To lift the Pad Driver/Brush off the floor, lift up the Pad Driver/Brush Handle and guide the handle to the right to disengage the Pad Driver/Brush Pedal. Then push the handle or foot pedal down and guide it to the left to lock it at the lowest position.

2. Press and hold the Remove Brush button automatically uninstall the Pad Drive/Brush.

for 5 seconds. The Brush Motor will

9

C20T
Using the Vacuum: · Lower the Squeegee Lever. · Turn on the Vacuum by pressing the Vacuum button on the
Touchscreen. · Pressing the Vacuum button again will turn it off within 10 seconds. Energy Saver Mode: · Press the VAC ECO button to reduce the power consumption of the
vacuum motor. Press the VAC ECO button again to deactivate the Energy Saver mode. Water Flow: · Press the Water Flow button or slide your finger along the Water Display Section to set the water flow to 1 of the 6 levels. · The solenoid valves and pumps start when the Brush Motor starts. · You can also adjust the water flow with the Water Flow Ball Valve. Settings Press the Settings button to adjust or view any of the below features.
1 2 3 4 5 6 7
1. Press Brightness adjustment to change the brightness of the screen.
2. Press Running time to check the total running time of the machine and its motors.

Model 641746

10

C20T

Model 641746

3. Press Historical fault query to see all the past errors that have occurred on this machine.

Press the search button to enter an error code and check the date and time it occurred. 4. Press Language management to change the language 5. Press Date & Time to change the date or time. Press the right arrow button next to “Date” to change the date. Press the Save button to set the date. Press the right arrow next to “Time” to change the time. Press the button next to the “24-Hour Time” to toggle between 12-hour or 24-hour display. Press to set the time.
6. Press Password to change the login password used to access the machine · To change the password, input the same password
twice and press Save. · Note that the default password is “0000”. · To disable passwords, leave the password field
blank and press Save. The next time the machine is rebooted, the machine will enter the warning page instead of the lock screen.
11

C20T

Model 641746

MACHINE STORAGE

1. Store the machine indoor in a dry location. 2. Always store the machine with the squeegee and pad/driver raised off the floor. Step on and
set the foot pedal to the lowest position. 3. Always drain the solution and recovery tank fully before storing, especially when storing in a
cold location.

BATTERY MAINTENANCE

1. Keep the top of the battery and the terminals free from corrosion. A mix of baking soda and water solution helps keep the batteries corrosion free. DO NOT ALLOW THE BAKING SODA/WATER SOLUTION TO ENTER THE BATTERY CELLS.
2. Use a wire brush with the baking soda solution to clean the battery posts and connections. 3. Check battery connections for wear and loose terminals. Replace if necessary. Disposal : · Old batteries must be disposed of in compliance with local regulations. · Never dispose of old batteries with municipal waste.
DAILY MAINTENANCE

WARNING Before performing any maintenance on the machine, make sure that the power is turned off or the
batteries are disconnected. Repairs are to be completed by authorized service centers only.

1. Wipe the whole machine with a clean/damp cloth. WARNING ­ Check local regulations for properly
disposing wastes before emptying tanks. 2. Empty the solution tank by removing the Solution Drain
Plug located at the bottom-left corner of the back of the machine.

Solution Drain Plug

Water Flow Ball Valve (closed position)
12

C20T

Model 641746

3. Empty the recovery tank by removing the Recovery Tank Drain

Hose from the hook on the back of the machine and opening the

hose lid. Rinse out the Recovery Tank with clean water.

4. Open the Recovery Tank Door to remove the Vacuum Filter and

rinse with water.

5. Remove the Shut-off Float and rinse with water. Ensure

there is no foam in or on the filter screen. 6. Remove the Pad Driver/Brush and Squeegee
Assembly and clean with clean water.

Recovery Tank Drain Hose

Shut-off Float

Debris Filter

Vacuum Intake Hose

MONTHLY MAINTENANCE

1. Flush out solution tank with clean water. 2. Remove and clean the Solution Drain Plug. 3. Clean the Rubber Skirt on the Brush Head
Assembly by removing the Spring Lock. 4. Turn on and off the Pad/Brush and Vacuum
motors to ensure the motors are still working properly.

Spring Lock of Rubber Skirt on Brush Head Assembly

SQUEEGEE RUBBER BLADE REPLACEMENT

1. Remove the squeegee assembly from the unit (refer to squeegee assembly installations). 2. Unlock the spring lock and slide out the blades. Replace with new blades and re-assemble.

13

C20T

Model 641746

TROUBLESHOOTING

PROBLEM No power Little or no water yield
Poor water pickup

Cause · Not connected to the power. · Water flow tap closed.
· Solution tank filter is clogged. · Solution tank is empty. · The suction hole of squeegee
is blocked. · The squeegee blade is worn. · The suction squeegee is not
installed correctly · The suction hose is abraded
or loose.
· The suction hose is blocked.
· The cap of the drain pipe is loose.
· The cover of drain tank is opened.
· The drain tank is full. · Vacuum motor is loose.

Solution · Connect the machine to the batteries. · Open the Water Flow Ball Valve by
turning it until the handles run parallel to the pipes. · Clean solution tank filter. · Fill the solution tank. · Clean the squeegee with damp towel.
· Replace the squeegee blade. · Reinstall the suction squeegee.
· Replace the suction hose or re-install the suction hose and tighten it.
· Check the hose and remove the blocked things.
· Tighten the cover of the drain pipe.
· Make sure the cover of the drain tank is closed and sealed.
· Empty the drain tank. · Tighten the mounting screws of the
motor. Overtightening the screws can damage the motor.

14

C20T

Model 641746

TROUBLESHOOTING ERROR CODES

Error code F01 F02 F03 F04
F05
F06 F07 F10
F11
F12
F13
F14
F16 F18 F19

Problem
Emergency Stop Alarm Triggered Eeprom Failure 1 Low Battery Voltage
High Battery Voltage
Pre-Charging Failure 1
Key Switch Voltage Failure Controller Self-Checking Error Traction Motor MOS Tube Failure
Brush Motor MOS Tube Failure
Vacuum Motor MOS Tube Failure
Brush Up/Down Motor MOS Tube Failure
Squeegee Up/Down Motor MOS Tube Failure
Error: Traction Motor Short Circuit Error: Brush Motor Short Circuit Error: Vacuum Motor Short Circuit

Solution
Release the emergency stop. Turn the machine off and back on.
Rewrite the configuration parameters, then restart. 1. Charge the batteries, then restart the controller 2. Replace the controller If the batteries volts are higher than what is set, wait until the volts recover to normal status then restart the controller 1. Check drive motor/electromagnetic brake to make sure there is no short circuit 2. Replace the controller Make sure no wiring issue Replace the controller 1. Make sure no water entered into the brake, then restart 2. Make sure no wiring issue of the drive motor (if it is short- circuited with batteries) 3. Replace the controller 1. Make sure no wiring issue of the Brush Motor (if it is short-circuited with the batteries) 2. Replace the controller 1. Make sure no wiring issue of the vacuum motor (if it is short-circuited with the batteries) 2. Replace the controller 1. Make sure no wiring issue of the brush Up/Down motor (if it is short-circuited with the batteries) 2. Replace the controller 1. Make sure no wiring issue of squeegee UP/Down motor (if it is short-circuited with the batteries) 2. Replace the controller 1. Check the wiring of the drive motor 2. Replace the controller 1. Check the wiring of the Brush Motor 2. Replace the controller 1. Check the wiring of the vacuum motor 2. Replace the controller

15

C20T

Model 641746

Error code F21 F22 F23
F24
F26 F29 F30 F33 F34 F35 F36 F37 F52 F55
F56
F57 F82 F83 F85 F86

Problem

Solution

Error: Squeegee Up/Down Motor Short Circuit Error: Controller Disconnection Accelerator Connection Failure
Warning: Do Not Step on The Accelerator to Start
Temperature Sensor Failure
Error: Brush Motor Open Circuit Error: Vacuum Motor Open Circuit Error: Traction Motor Overload Error: Brush Motor Overload Error: Vacuum Motor Overload Error: Brush Up/Down Motor Overload Error: Squeegee Up/Down Motor Overload Warning: temperature of controller is too high Warning: No Clean Water
Warning: Dirty Water Full
Warning: Pressure Switch Not Triggered Error: Electronic Brake Open Circuit Error: Electronic Brake Short Circuit Speed Limiter Failure
Warning: Beeper Open Circuit

1. Check the wiring of the squeegee Up/Down motor 2. Replace the controller Check if the CAN communication line is well connected. 1. Check the pedal wiring 2. Replace the pedal 3. Replace the controller 1. Check the pedal wiring 2. Release the pedal and restart 3. Replace the pedal 1. Controller temperature is too high or low 2. Replace the controller Check the wiring of Brush Motor, and restart the controller Check the wiring of vacuum motor, and restart the controller Make sure no motor stall Make sure no motor stall Make sure no motor stall Make sure no motor stall
Make sure no motor stall
Controller temperature is too high, please check load
1. Add clean water 2. Check the wiring of water volume indicator 3. Replace the switch of water indicator 1. Drain the dirty water 2. Check the wiring of water indicator switch 3. Replace the water indicator switch Check the wiring of pressure switch, and restart the controller Check the wiring of brake, restart the controller
1. Check the wiring of electromagnetic brake 2. Replace the electromagnetic brake Check the voltage of the speed limiter, and restart the controller Check the wiring of horn

16

C20T

Model 641746

Error code F92
F93
F94
F95
F100
F101
F104
F105 F112
F120

Problem
Warning: Warning Light Open Circuit Error: Warning Light Short Circuit Warning: Solenoid Valve Open Circuit Error: Solenoid Valve Short Circuit Warning: Front Light Open Circuit Error: Front Light Short Circuit
Warning: HCLO Open Circuit
HCLO Short Circuit Error Warning: Controller Low Temperature Warning: HCLO Module usage time out

Solution
Check the wiring of warning light
1. Check the wiring of warning light 2. Replace the warning light Check the wiring of solenoid valve
1. Check the wiring of solenoid valve 2. Replace the solenoid valve Check the wiring of front light
1. Check the wiring of front light 2. Check the driving circuit of the front light 1. Check wiring of HCLO module 2. Check whether the waterway is working properly Check wiring of the HCLO module Restart the controller after the controller recover to normal temperature. Replace the HCLO module, and clear the HCLO running time manually

17

C20T

Wiring Diagram

Model 641746

18

C20T

Model 641746

GLOBAL EQUIPMENT COMPANY INC. FLOOR CARE EQUIPMENT WARRANTY

1. LIMITED WARRANTY

Global Equipment Company Inc. (DBA Global Industrial) (“Global”) hereby warrants to you, the original purchaser and

end user (“you” or “your”), that the product that you purchased which accompany this Limited Warranty (“Product”)

shall be free from defects in materials and workmanship under normal use consistent with the accompanying

documentation for the specified warranty duration set forth below and commencing upon the date of purchase (the

“Warranty Period”):

Product

Plastic

Motor

All Other

Battery

Labor

Travel

Housing

Parts

Electric Corded

8 Years

2 Years

1 Year

n/a

1 Year

6 Months

Floor

Scrubbers

Battery

8 Years

2 Years

1 Year

1 Year

1 Year

6 Months

Operated Floor

(or 2000 hrs.) (or 1000 hrs.)

Scrubbers

Ride-On

8 Years

2 Years

1 Year

1 Year

1 Year

6 Months

Battery

(or 2000 hrs.) (or 1000 hrs.)

Operated Floor

Scrubbers &

Sweepers

2. WARRANTY SERVICE Pursuant to this Limited Warranty, Global will, at its option, (i) repair the Product using new or reconditioned parts or (ii) replace the Product with a new or reconditioned product. For warranty service, you must first contact Global, by telephone at 800-645-2986 (US) or 888-645-0878 (Canada) to confirm that such Products are covered by this Limited Warranty. Repaired and replaced Products shall be subject to the balance of the Warranty Period otherwise applicable. Any reconditioned parts used by Global shall be subject to all the same provisions as otherwise applicable to new parts. If Global determines that you should return a Product, you shall obtain from Global a return materials authorization (“RMA”) number and shipping instructions prior to any shipment of such Product to Global, and you must include such RMA number with any corresponding Product shipment, along with a true and correct copy of the original receipt showing the date of Product purchase by you, and a detailed, written description of any associated Product problems. Please note that you are responsible for all shipping charges incurred in returning a Product for exchange

or repair. For one year from date of purchase, Global shall pay for return shipping of repaired and/or replaced Products to addresses within the continental United States and Canada only. If Global determines that any Product is not covered by this Limited Warranty, you must pay all parts, labor charges and return shipping for such Product. THE FOREGOING DESCRIBES THE SOLE LIABILITY OF GLOBAL, AND YOUR SOLE REMEDY, FOR ANY BREACH OF THIS LIMITED WARRANTY. 3. WARRANTY EXCLUSIONS AND LIMITATION OF LIABILITY This Limited Warranty does not cover (i) defects or damages resulting from acts of God, casualty, freight damage, accident, misuse, abuse, negligence, overloading, usage of non-approved chemicals or cleaning agents, engine oil and pump lubricant, modification, service or repair by other than Global or its independent third party service providers; (ii) any Product for which the serial numbers have been removed, modified or defaced.; (iii) normal wear and tear; (iv) damage to or loss of repaired or replaced products during shipping by Global except when such damage or loss is caused by poor or inadequate packaging by Global; or (v) products purchased or transported or exported outside the continental United

19

C20T
States or Canada. For the avoidance of doubt, this Limited Warranty shall be null and void for any product exported or transported outside the continental United States and Canada. UNDER NO CIRCUMSTANCES WILL GLOBAL BE LIABLE FOR ANY LOSS OF USE, INTERRUPTION OF BUSINESS OR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY OR OTHERWISE, EVEN IF GLOBAL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE TOTAL LIABILITY OF GLOBAL HEREUNDER EXCEED THE GREATER OF $50 OR THE AMOUNT YOU ACTUALLY PAID FOR THE PRODUCT GIVING RISE TO SUCH LIABILITY, REGARDLESS OF THE CAUSE OF ACTION, IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE. NOT ALL JURISDICTIONS ALLOW SUCH LIMITATIONS OF DAMAGES SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU. 4. WARRANTY DISCLAIMER AND LIMITATIONS EXCEPT AND TO THE EXTENT EXPRESSLY SET FORTH ABOVE THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND GLOBAL EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN. EXCEPT AND TO THE EXTENT EXPRESSLY SET FORTH ABOVE, THE PRODUCTS ARE PROVIDED ON AN “AS IS” BASIS, AND GLOBAL MAKES NO ADDITIONAL WARRANTIES, EXPRESS, IMPLIED, ARISING FROM COURSE OF DEALING OR USAGE OF

Model 641746
TRADE, OR STATUTORY, AS TO THE PRODUCTS OR ANY MATTER WHATSOEVER. THIS IS A LIMITED WARRANTY AND IS THE ONLY WARRANTY MADE BY GLOBAL. THE AGENTS, EMPLOYEES, DISTRIBUTORS, AND DEALERS OF GLOBAL ARE NOT AUTHORIZED TO MAKE MODIFICATIONS TO THIS LIMITED WARRANTY, OR MAKE ADDITIONAL WARRANTIES BINDING ON GLOBAL. ACCORDINGLY, ADDITIONAL STATEMENTS SUCH AS DEALER ADVERTISING OR PRESENTATION, WHETHER ORAL OR WRITTEN, DO NOT CONSTITUTE WARRANTIES BY GLOBAL AND SHOULD NOT BE RELIED UPON. GLOBAL DOES NOT WARRANT THAT THE PRODUCTS WILL OPERATE WITHOUT FAILURE, OR THAT THE PRODUCTS WILL MEET YOUR NEEDS OR EXPECTATIONS. NOT ALL JURISDICTIONS ALLOW SUCH WARRANTY LIMITATIONS SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU. 5. CHOICE OF LAW AND JURISDICTION FOR PURCHASES WITHIN THE CONTINENTAL US This Limited Warranty shall be subject solely to the laws of the State of New York as applied to contracts entered into in the State of New York between New York residents. Any dispute arising hereunder shall be subject to the sole jurisdiction of the State and Federal Courts located in Nassau County, New York. The parties hereby consent to the personal jurisdiction of such courts. FOR PURCHASES WITHIN CANADA – This Limited Warranty shall be subject solely to the laws of the Province of Ontario. Any dispute arising hereunder shall be subject to the sole jurisdiction of Ontario, Canada. The parties hereby consent to the personal jurisdiction of such courts.

20

GLOBALINDUSTRIAL.COM 1-800-645-1232
© 2021 Caterpillar. All rights reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Global IndustrialTM a licensee of Caterpillar Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>