AMERICAN LIGHTING P5571-66A Entwined 1 Light White 24 in Globe Pendant Light with White Rattan Shade Instruction Manual
- June 13, 2024
- American Lighting
Table of Contents
AMERICAN LIGHTING P5571-66A Entwined 1 Light White 24 in Globe Pendant
Light with White Rattan Shade
Product Information
The P5570-44B/66A and P5571-44B/66A are lighting fixtures designed for installation in residential or commercial spaces. The fixtures come with a mounting plate, canopy, and necessary hardware for installation. The fixtures support medium base bulbs up to 60 watts or CFL/LED equivalents (not included).
Installation Instructions
- Before installation, make sure to shut off the power at the fuse box or circuit breaker.
- Remove the old fixture, including the mounting hardware.
- Unpack the new fixture and lay out all the parts in a clear area. Ensure no small parts are misplaced.
- Remove the two mounting screws from the side of the canopy and take off the mounting plate.
- Attach the mounting plate to the junction box using the provided outlet box screws.
- Loosen the allen screw with the allen wrench provided. Determine the desired height for hanging wire, then tighten the allen screw.
- Connect the electrical wires as shown in Fig. 2. Ensure all wire connectors are secured. If your junction box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided. Tuck the wire connections neatly into the junction box.
- Attach the canopy to the mounting plate and secure it with the mounting screws.
- Install one medium base bulb or CFL/LED equivalent up to 60 watts into the socket.
Your installation is now complete. Restore power to the junction box and test the fixture.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT ! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEUR
INSTALLATION INSTRUCTIONS
PREPARING FOR INSTALLATION (Fig. 1)
- Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
SUGGESTED INSTALLATION (Fig. 1 and Fig. 2)
- Remove two mounting screws (E) from the side of canopy (D) and remove mounting plate (B).
- Attach mounting plate (B) to the junction box (not included) with the two outlet box screws (C) provided.
- Loosen allen screw (H) with allen wrench (F) provided, determine the designed height for hanging wire (I), then tighten allen screw (H) with allen wrench (F) provided.
CONNECTING THE WIRES (Fig. 2)
- Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (B) using the green screw provided. Tuck the wire connections neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
- Attach canopy (D) to mounting plate (B) and secure it with mounting screws (E).
- Install (1) one medium base bulb (K) up to 60 watts or CFL or LED equivalent (not included) to the socket (J).
Your installation is now complete. Return power to the junction box and test the fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>