AMERICAN LIGHTING P5571-66A Entwined 1 Light Black 24 in Globe Pendant Light Instruction Manual

AMERICAN LIGHTING P5571-66A Entwined 1 Light Black 24 in Globe Pendant

Light

Product Information

The product model numbers for these installation instructions are P5570-44B/66A and P5571-44B/66A. These instructions provide guidance on how to install and connect the fixture, as well as complete the installation process. The product includes a mounting plate, ground screw, mounting screws, a socket for a medium base bulb, and necessary wires for connection.

Product Usage Instructions

1. Before starting the installation, ensure that the power is shut off at the fuse box or circuit breaker.
2. Unpack the new fixture and lay out all the parts in a clear area, taking care not to misplace any small parts needed for installation.
3. Remove the two mounting screws from the side of the canopy and detach the mounting plate.
4. Attach the mounting plate to the junction box using the provided outlet box screws.
5. Loosen the allen screw with the provided allen wrench and determine the desired height for the hanging wire. Then, tighten the allen screw accordingly.
6. Connect the electrical wires as shown in Fig. 2, ensuring that all wire connectors are secured. If your junction box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the provided green screw. Neatly tuck the wire connections into the junction box.
7. Attach the canopy to the mounting plate and secure it with the mounting screws.
8. Install one medium base bulb up to 60 watts or its CFL or LED equivalent (not included) into the socket.
9. Return power to the junction box and test the fixture to ensure proper installation.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT ! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEUR

INSTALLATION INSTRUCTIONS

PREPARING FOR INSTALLATION (Fig. 1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

SUGGESTED INSTALLATION (Fig. 1 and Fig. 2)

3. Remove two mounting screws (E) from the side of canopy (D) and remove mounting plate (B).
4. Attach mounting plate (B) to the junction box (not included) with the two outlet box screws (C) provided.
5. Loosen allen screw (H) with allen wrench (F) provided, determine the designed height for hanging wire (I), then tighten allen screw (H) with allen wrench (F) provided.

6. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (B) using the green screw provided. Tuck the wire connections neatly into the junction box.

COMPLETING THE INSTALLATION (Fig. 1)

7. Attach canopy (D) to mounting plate (B) and secure it with mounting screws (E).
8. Install (1) one medium base bulb (K) up to 60 watts or CFL or LED equivalent (not included) to the socket (J).
   Your installation is now complete. Return power to the junction box and test the fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>