LAMAX Dots3 ANC Wireless Earbuds User Guide

: June 13, 2024
: LAMAX

Table of Contents

LAMAX Dots3 ANC Wireless Earbuds
Product Information
Product Usage Instructions
Overview
Controls
- Pairing
ANC and Transparency mode
Charging
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAMAX Dots3 ANC Wireless Earbuds

Product Information

The product is called Dots3 ANC. It consists of a pair of wireless earphones with active noise cancellation (ANC) feature. The earphones have LED notification lights, a multifunction button, and built-in microphones for calls and voice commands.

Product Usage Instructions

Controls:

Switch on: Hold down the multifunction button for 5 seconds.
Switch off: Hold down the multifunction button for 5 seconds.
Play / Pause: Tap the multifunction button.
Volume up: Double tap the multifunction button on the right earphone.
Volume down: Double tap the multifunction button on the left earphone.
Next song: Hold down the multifunction button on the right earphone for 3 seconds.
Previous song: Hold down the multifunction button on the left earphone for 3 seconds.
Answer call: Tap the multifunction button.
End call: Hold down the multifunction button for 1 second.
Reject a call: Hold down the multifunction button for 2 seconds.
ANC on / ANC off / Transparency modes: Triple tap the multifunction button on the right earphone.
Music / Game mode: Triple tap the multifunction button on the left earphone.
Activate mobile assistant: Hold down the multifunction button on the left earphone for 5 seconds.

Switching on:
The earphones automatically switch on when removed from the charging station. To switch on manually, hold the multifunction button for 5 seconds. An audible notification will sound when switching on.

Switching off:
The earphones automatically switch off when inserted into the charging station. To switch off manually, hold the multifunction button for 5 seconds. An audible notification will sound when switching off.

Pairing:

Remove the earphones from the charging station. The earphones will automatically connect to each other. One of the earphones will be the master and ready for pairing, indicated by a white flash. The other earphone will glow white.
Switch on Bluetooth on your device and search for “LAMAX Dots3 ANC” in the list of available Bluetooth devices. After successful pairing, an audio notification will sound and the LEDs in both earphones will turn off.

If there are problems with pairing, remove the earphones from the list of paired devices on your phone. Insert the earphones into the charging station. Press the multifunction button on both earphones simultaneously five times. The LEDs on both earphones will flash white five times. Then pair them as described in step 1

Charging :

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and connect the other end of the cable to a USB power supply with a maximum input voltage of 5V and current of 2A. The LED will flash white when charging and glow white when fully charged. If the charging station is discharged, the LED will flash red for 4 seconds.
Before using for the first time, remove the transparent protection film on the charging pins from the inside of both earphones.
To charge the earphones, insert them into the charged charging station. The LED on the charging station will light red for 4 seconds. When charging, the LED in the earphones will glow red. When fully charged, the LEDs will glow white for 30 seconds, then turn off.

Specifications:

Wireless technology
Max. pairing distance
Supported codecs
Earphones battery capacity
Charging station battery capacity
Playback time
Charging time of earphones
Charging time of charging station
Weight of one earphone
Weight including charging station

Overview

LED notification
Multifunction button
Microphone

Controls

Switch on Hold down the multifunction button for 5 seconds
Switch off Hold down the multifunction button for 5 seconds
Play / Pause Tap the multifunction button
Volume up Double tap the multifunction button on the right earphone
Volume down Double tap the multifunction button on the left earphone
Next song Hold down the multifunction button on the right earphone for 3 seconds
Previous song Hold down the multifunction button on the left earphone for 3 seconds
Answer call Tap the multifunction button
End call Hold down the multifunction button for 1 second
Reject a call Hold down the multifunction button for 2 seconds
ANC on / ANC off / Transparency modes Triple tap the multifunction button on the right earphone
Music / Game mode Triple tap the multifunction button on the left earphone
Activate mobile assistant 4× taps on the multifunction button

Switching on
The earphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 5 seconds. An audible notification sounds when switching on.

Switching off
The earphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off .

Pairing

Remove the earphones from the charging station. The earphones will automatically connect to each other. One of the earphones will be the master and ready for pairing, this is indicated by a white flash. The other earphone will glow white.
Switch on Bluetooth on your device and search for LAMAX Dots3 ANC in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LEDs in both earphones will turn off.

If there are problems with pairing, remove the earphones from the list of paired devices on your phone. Insert the earphones into the charging station. Press the multi-function button on both earphones
simultaneously five times. The LEDs on both earphones will flash white five times. Then pair them as described in step 1.

ANC and Transparency mode

Mode order:

ANC off – switching off of active noise cancellation. Standard music mode.
ANC on – switching on of active noise cancellation.
Transparency mode – amplification of ambient sounds thanks to microphones in the earphones.

Charging

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2A. The LED will flash white when charging. When fully charged, it will glow white. If the charging station is discharged, the LED will flash red for 4 seconds.
Before using for the first time, be sure to remove the transparent protection film on the charging pins from the inside of both earphones.
To charge the earphones, insert them into the charged charging station, the LED on the charging station will light red for 4 seconds. When charging, the LED in the earphones will glow red. When fully charged, the LEDs will glow white for 30 seconds, then turn off.