LAMAX Sounder2 30W 360° Bluetooth Speaker Instruction Manual
- October 30, 2023
- LAMAX
Table of Contents
LAMAX Sounder2 30W 360° Bluetooth Speaker
Product Information
The Sounder2 is a wireless speaker that comes with various features like Bluetooth connectivity, microSD card slot, and AUX/USB-C inputs. It has a Li- Ion 4000 mAh battery that provides up to 12 hours of playback time and takes 3 hours to charge. The speaker also has LED indicators that show the status of pairing and playback modes. It has a weight of 600 g and comes with a user manual that can be downloaded from the manufacturer’s website.
Product Usage
Power On / Off
To turn on the speaker, press and hold the POWER button. The LED lights up,
and a beep sound confirms the speaker is on. To turn off the speaker, hold
down the same button.
Pairing
- Turn on the speaker by holding down the POWER button. The LED starts blinking, indicating it’s ready to pair.
- Activate Bluetooth on your device and select LAMAX Sounder2 from the list of available devices. Upon successful pairing, the speaker emits a sound, and the LED lights up.
- You can control playback either on the paired device or directly on the speaker itself. The LED blinks slowly during playback.
- Turn on the speaker by holding down the POWER button. The LED starts blinking and the speaker is ready to pair.
- Activate the Bluetooth connection on your phone or other device. Select “LAMAX Sounder2” from the list of available devices. When pairing is successful, the speaker emits a sound and the LED lights up.
- Playback can be controlled either by the paired device or directly on the speaker itself. The LED blinks slowly during play-back.
TWS
To pair two speakers, turn on both speakers and make sure they are not paired
with any multimedia device. On one of them (the main one), press and hold the
MODE button until it beeps. After successful pairing, a second beep sounds,
and the main speaker acts as the left channel. To unpair the speakers, hold
the same MODE button on the main speaker.
Audio Input
You can play music from any device by connecting it to the AUX jack via the
supplied audio cable. However, when playing back through the audio input, you
cannot control the tracks directly on the speaker.
By connecting to the AUX jack via the supplied audio cable, you can play music
from any device. When playing back through the audio input, you cannot control
the tracks directly on the speaker.
Handsfree
When pairing your phone via Bluetooth, the handsfree function is activated. To
answer/end the call, press PLAY, reject the incoming call by holding down
PLAY, and double-tap PLAY to redial the last dialled number.
Controls
Other
LED Indicators
LED is colored according to the audio mode
Charging indicators
When charging, the status LED lights up red, when fully charged it lights up
green.
Main Features
- Total power of 30 W
- IP67 water resistance
- Built-in rechargeable lithium battery with a capacity of 4000 mAh, which can handle 12 hours on a single charge
- TWS for pairing with a second identical speaker
Charging
The speaker can be charged using the supplied USB cable from a suitable USB
device – adapter, PC, power bank. Do not charge the speaker with an input
voltage higher than 5V, as the speaker may be damaged. An audible signal
sounds when the battery is running low. When charging, the LED lights up red
and when fully charged, the LED lights up green.
Parameters
The
latest version of the user manual can be downloaded here: https://www.lamax-
electronics.com/downloads/lamax-sounder2/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>