LAMAX eBumbleBee ATV60M Children’s Quad Bike User Manual

eBumbleBee ATV60M
USER MANUAL
Electric Quad – TYPE I –
CATEGORY Y12+

eBumbleBee ATV60M Children’s Quad Bike

WARNING!
The device is delivered disassembled. Assembly is required for full functionality. We recommend that this be handled by the manufacturer’s professional service. Improperly performed assembly or repair may lead to damage to the device
that will not be covered by the manufacturer’s warranty, and in the worst case, to injury or even death.
Neither the manufacturer, importer nor distributor shall be held liable for improperly performed installation or damage caused by such installation.

ASSEMBLING (Visual reference)

Technical and design changes may be made to the products based on regular changes and amendments to directives, and Czech and European standards. Photos and drawings in this manual may be illustrative only or may use images of another product. Therefore, the customer cannot make any claims and complaints related to this manual, (especially possible deviations from the information contained therein) as long as the product meets all the given certifications and declarations and functions as described in the manual and as long as the use of the product meets the intended purpose at the time of purchase.
This manual is written to acquaint the user with the principles of operation of this product, its assembly and installation, as well as the rules of safe use, maintenance, and storage. This manual is an integral part of the product, so please keep it carefully for future reference.
Please read this manual carefully before operating the vehicle for the first time!

SAFETY SYMBOLS

The quad bike must be used with the utmost caution. Safety symbols and stickers on the product alert the user to the type of danger and remind them of all the safety guidelines. The table below explains the meaning of all the symbols used.
Do not remove the stickers or safety labels under any circumstances.

| General warning sign
---|---
| Read the operating instructions. Before use, it is necessary to read the manual thoroughly.
| Do not use this device in rain or water, or leave it outside when it is raining.
| Electrical voltage hazard
| Do not use the quad if you are under the influence of alcohol, drugs, or medication.
| The quad bike is not intended for use on roads.
| Attention hot surface! Risk of burns!
| The quad bike is a single-seater only. Do not carry a passenger!
| Wear protective equipment.
| Use from 12 years of age onwards. Children under the age of 16 must always be supervised by an adult.
| Vehicle payload
| Tyre pressure
| Weight
| Device does not belong in household waste.
| Class II protection
****| The product complies with the relevant EU standards.

SPECIFICATIONS

*The maximum range figure indicates the approximate range that can be achieved under absolutely ideal conditions (flat terrain, constant speed – no full power, no wind, correct tyre pressure, driver weight <50 kg, no payload, ambient temperature 20 °C). In practice, the range is then primarily influenced by the weight of the driver and other loads, the altitude gradient to be overcome when riding, weather conditions, road conditions, driving style, frequency of starts (e.g. at junctions), tyre condition (especially inflation), battery wear and many other factors. In extreme conditions, the range can be reduced to less than 50% of the claimed value.

Battery specifications

Charging adapter specifications

The manufacturer reserves the right to all printing errors and differences in depiction. The manufacturer also reserves the right to make any technical changes that do not affect the basic technical parameters and function of the quad bike without prior notice!

PRODUCT DESCRIPTION

1. Seat	13) LCD display

2. Rear wheel| 14) Kill switch
3. Footrest| 15) Handlebars / handle
4. Front wheel| 16) Accelerator pedal lever
5. Front suspension| 17) Electric switch
6. Front bumper| 18) Rear RGB light
7. Front arm| 19) Rear / brake light
8. Front LED light| 20) Rear disc brake
9. Handlebar cover| 21) Differential drive
10. Brake lever| 22) Electric motor
11. Switcher on/off| 23) Rear suspension
12. Direction switch| 24) Side RGB light

FUNCTION DESCRIPTION

FUSE
The fuse is located under the seat. Switch it to the „ON“ position.

ELECTRICAL SWITCH (STARTER)
Turn the ignition key to the „ON“ position.

SWITCHES ON THE LEFT SIDE OF THE HANDLEBAR

1. On/Off switch. Turn the red switch to the „on“ position.
2. Direction switch. The pressed position of the switch means „R“ – reverse driving („R“ will be displayed on the LCD display). The pressed position of the switch means „D“ – drive forward („D“ will be displayed on the LCD display).
3. Unlocking parking mode. Press this switch before driving. „P“ (parking) disappears from the LCD display. Now select „D” or „R” on the drive direction switch and press the gas pedal lever… at that moment the ATV will go into motion.

SAFETY „KILL SWITCH“

1. The red head of the safety emergency switch is attached to the right side of the handlebars. Pin the other side anywhere on your clothing. In the event of an emergency, the red end disconnects, instantly cutting off the power circuit and thus the engine power.
   If you need to continue using the quad bike, put the safety cap back in place.

USB PORT
USB port for charging a mobile phone.

LCD DISPLAY

1. Driving mode mode. „D“ – drive forward / „R“ – drive reverse / „P“ – park
2. Speed indicator
3. Battery charge indicator in „%“
4. Odometer
5. Battery charge status indicator (graphical)

Pay special attention to the instructions highlighted below:

WARNING!| Potentially dangerous situations that could have a fatal outcome (death or serious injury) if not avoided.
---|---
PROHIBITED!| Potential danger (minor or moderate injury) and/or damage to vehicle or property if these instructions are not observed.
ATTENTION|
NOTE| Provides useful information.

ABOUT THE LAMAX ELECTRIC QUAD EBUMBLEBEE ATV60M

The LAMAX eBumbleBee ATV60M electric quad bike is designed for leisure activities. It is powered by a chain-driven electric motor that provides quiet and emission-free operation. Speed is controlled by turning

the throttle grip on the right handlebar. Next to the handle, there is a battery charge indicator. The rough tread tyres ensure good ground clearance. Front and rear adjustable suspension ensure a comfortable ride.

CONDITIONS OF USE

CATEGORY Y12+ quad bike

• The quad is intended for recreational use by a single driver without a passenger aged 12 years and over, with the speed limiter being set at 6 km/h. Children under the age of 16 must be supervised by an adult at all times and must be trained in the operation of the vehicle before their first ride. It is always the responsibility of the supervising adult to assess the child‘s fitness to operate the vehicle. Children must understand and follow all instructions in this manual before driving.
• In the event of an apparent defect caused by transport or unpacking, notify your dealer immediately. DO NOT OPERATE.
• Recommended rider height: 120–170 cm

WARNING!
READ THE ENTIRE INSTRUCTION MANUAL CAREFULLY! Read all instructions in the manual before operating the vehicle. Pay particular attention to the safety instructions.
FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS MAY RESULT IN PRODUCT DAMAGE OR SERIOUS INJURY OR DEATH.

WARNING!
The quad bike may not be operated or handled by a person:

• who is not physically fit enough,
• who is unable to operate the quad bike to its full extent, or who does not understand the instructions in this manual,
• who is under 12 years of age. Persons under 16 years of age may use this quad bike only under the constant supervision of an adult.

WARNING!
THIS QUAD BIKE IS NOT A TOY!
PROHIBITED!
All legal standards, state and local laws must be followed when using this vehicle. These may differ in each country, region or municipality.
SPECIFIC TERMS OF USE
This quad bike is intended solely for:

• Recreational and/or commercial use by a person 12 years of age or older. Persons under the age of 16 may only use the quad bike under the supervision of an adult.
• Operation OFF public roads.
•  Use that complies with the safety guidelines in this user manual.
• No other use not consistent with the intended purpose.
  Any other use not in accordance with the intended purpose will void the warranty or result in the manufacturer‘s disclaimer of any liability.
  Any unauthorised modifications will void the warranty and also exclude the manufacturer‘s liability for damages resulting therefrom.

Do not overload – use the quad only for the purpose for which it was designed.
This quad bike was not designed for trade, commercial or industrial use. Therefore, the manufacturer assumes no liability if this product is used in these or similar conditions.

ATTENTION
Observe legal guidelines and regulations to avoid possible accidents during operation.
The user is liable for all damages caused to third parties and their property.
PROHIBITED!
Do not use the quad bike near children or pets.
NOTE
Keep this manual carefully for future reference. If you do not understand any of the instructions, contact your dealer. If the motorcycle is passed on to another person, this instruction manual must also be passed on to them.
DO NOT exceed the weight limit stated in the technical specifications!
WARNING!
DO NOT CARRY OTHER PERSONS. THE VEHICLE IS A SINGLE-SEATER.
WHERE AND HOW NOT TO RIDE

PROHIBITED!
DO NOT USE THE QUAD IN ROAD TRAFFIC.

•  Do not use the vehicle indoors. Using the quad bike indoors risks damaging surfaces such as carpets or floors.
• Do not ride the quad bike near stairs or swimming pools.
• Wet, slippery, uneven or rough surfaces increase the risk of accidents. Avoid surfaces such as puddles, mud, water, snow or ice.
• Avoid the possibility of the quad bike tipping over by not riding in areas with a slope greater than 15 degrees.
• If the quad overturns, the rider can be seriously injured or even killed.
• Do not drive in reduced visibility or in the dark without the front headlights on.
• Do not use the vehicle to tow other vehicles or tow it behind other vehicles.
• No driving in heavy rain.

AREA OF USE

WARNING!
NEVER OPERATE THE QUAD ON PUBLIC ROADS!

• The quad bike is intended for operation on a dry, firm, dust-free and non-slip surface.
• Before using the vehicle, check the terrain where you want to use it. Remove any objects that could catcher knock the vehicle, such as branches, cameras, wires, toys or other similar objects. Failure to remove these items could result in injury to the operator or bystanders, damage to the vehicle, or overturning of the vehicle.
• Do not operate the vehicle in a potentially hazardous environment, such as near flammable substances, flammable gases or powders. An explosion could occur, resulting in damage to the vehicle or injury resulting in death.

TRAINING

ATTENTION
All users of this quad bike must be fully trained in use, operation, and set- up, and familiarized with prohibited activities.

• The quad bike is not intended for use by persons with reduced sensory capacity or mental impairment.
  The quad bike is also not intended for use by persons with reduced mobility or insufficient physical disposition. Pregnant women are strongly advised not to use this vehicle.

SAFETY INSTRUCTIONS

• Always use extra caution when driving this quad bike. Do not use this product if you are tired or under the influence of alcohol, drugs or narcotics.
• Before your first ride, carefully read this instruction manual, especially the restrictions, risks and method of use. You must be able to stop and switch off the vehicle quickly.
• Report any damaged switches to an authorised workshop immediately. Do not operate the vehicle with such damage.

WARNING!
Driving this vehicle can be dangerous. RIDE AT YOUR OWN RISK. The manufacturer is not responsible for any personal injury caused by improper or irresponsible use.

ATTENTION
Do not use the quad bike in the dark or in reduced visibility.

• Start the quad bike (by turning the ignition key) in an outdoor environment and in a safe place for driving.

RIDER
WARNING!
Don‘t overestimate your abilities. Dangerous driving increases the risk of injury or damage to the vehicle.

• Always place your feet on the footrests provided when riding.
•  Hands, fingers and other parts of the body must always be kept a safe distance away from the drive chain, gears, wheels and all other moving parts. Otherwise, there is a risk of injury.
• It is prohibited to use headphones or mobile phones while riding.
• Do not touch the brakes or the motor of the quad bike. Surfaces can be very hot.

PROPER CLOTHING, PROTECTIVE EQUIPMENT AND GEAR

ATTENTION
Safety aids and equipment are an important prerequisite for safe riding.

WARNING!
THE DRIVER MUST USE THE PRESCRIBED PROTECTIVE EQUIPMENT.

• The driver of the quad bike must always be equipped with a helmet with a protective visor.
• For greater rider safety, we recommend using protective gloves, knee, elbow and spine protectors while riding.
• When riding the quad bike, do not wear loose clothing that could get caught in the controls or moving parts.
• Always wear protective equipment that covers the legs, ankles and feet when riding. Riding barefoot or in open shoes is not permitted.

BATTERY CHARGING

WARNING!
Failure to follow these instructions may result in electric shock, fire, and/or serious personal injury.

•  The battery is the most important part of the quad bike. The quad bike is equipped with Lead-acid batteries and these batteries have a life cycle.
  In order to maximise their life, it is important to take care of your batteries regularly.

• To charge the battery, use only the original charger from the manufacturer, supplied with the quad bike.

• If the battery indicator shows low battery capacity, connect the quad bike to the charger.

• Always make sure the charging port is clean and dry before charging. If the charger is not currently connected to the quad bike, the power input must always be covered with a rubber cap to prevent dust or other dirt from entering the input.

• Connect the power cord to the charger and then plug the charger into the outlet and make sure the light on the charger is GREEN.

• Insert the end of the charger into the power input on the quad bike. The charger light should turn RED – charging. When the light turns GREEN, the quad bike is fully charged. The time to full charge is approximately 6-8 hours.

• After charging the quad bike, disconnect the charger from the electrical outlet and the power cord from the quad bike.

• Do not leave the quad bike connected to the charger longer than necessary to fully charge.

• Do not use the charger if the cable or connectors are damaged.

• If the charger or any part of it is damaged, it must be replaced with a new one. Do not use such a charger under any circumstances. Risk of electric shock. For replacement, contact your dealer, device manufacturer or authorised service.

• Never use the motorcycle while it is connected to the charger.

• Never cover the charger.

• Charge the battery in a dry place at room temperature between 5°C and 40°C.

• Never leave the quad bike charging unattended. Charging must take place under constant supervision.

BATTERY– SAFETY GUIDELINES

• Fully charge the battery before first use.
• Charge regularly, preferably after every ride.
• Never let the battery run down completely!
• Operating temperature can affect overall battery life.
• Never connect mechanically damaged or swollen batteries to the charger. Do not use the battery in this state at all, there is a risk of explosion.
• Do not use a damaged power adapter or charger.
• Charge at room temperature, never charge below 0°C or above 40°C.
• Take care not to drop, puncture or otherwise damage the battery. Do not repair a damaged battery.
• Do not expose the charger or battery to moisture, water, rain, snow or various sprays.
• Do not expose the battery to sunlight or place it near heat sources. Strong light or high temperatures can damage the battery.
• Never leave batteries unattended during charging, a short circuit or accidental overcharging can cause the release of aggressive chemicals, explosion or subsequent fire!
• If the battery overheats while charging, disconnect the battery immediately.
• When charging, do not place the charger and the battery being charged on or near flammable objects.
• Pay attention to curtains, carpets, tablecloths, etc.
• It is strictly forbidden to use a mobile phone or other similar devices while riding.
• Keep the battery out of the reach of children and animals.
• Never disassemble the charger or battery.
• If the battery is integrated, never disassemble the device unless otherwise specified. Any such attempt is risky and may result in product damage and subsequent loss of warranty.
• Do not throw used or damaged batteries in the trash, fire, or into heating devices, but hand them in at hazardous waste collection points.
• If you do not comply with these policies, you assume full responsibility for any resulting damage.
• Always charge the device under constant supervision.
• If you have any suspicion of a possible flash fire, if the equipment starts to smoke or catches fire, notify the fire department immediately and, if possible, place the equipment in an open area and stay a safe distance away from the equipment. Battery cells may explode as a result of combustion and leak out of the device.
• Do not use water-based extinguishers to extinguish the device. Suitable extinguishers are snow CO 2, halation or with F-500 extinguishing agent.

INSPECTION, MAINTENANCE AND STORAGE

• A quad bike needs regular inspection and maintenance just like a bicycle or a motorcycle. Always make sure the quad bike is turned off and the power cord is disconnected before performing the following operations.

Checking and cleaning the quad bike

• Regularly inspect the structure and tyres for damage or excessive wear. In case of excessive wear, the tyre must be replaced. Do not use water or other liquids or cleaning agents for cleaning. Moisten a clean cloth with clean, soapy water and apply to the frame of the quad, then rinse the cloth thoroughly and wipe down the quad. Clean so that water does not get into the battery cover, power input, display, or tyres.
• Regularly check the tightness of all connections and screws.
• Check the front and rear shock absorbers regularly. The damper should spring and return to its original position after pushing on the quad.
• Check the brake function before each ride. If the brake function is not sufficient, it will be necessary to shorten the cable directly at the brake. Loosen the screw that secures the cable and pull the cable so that it is not too tight. Tighten the screw again and fine-tune the lever.

Maintenance and service

•  A quad bike requires regular maintenance and regular service just like a bicycle.
• The recommended service check is at least once a year.

Quad bike storage

•  Fully charge the battery before storing. If you store the quad bike for longer than two months, charge the battery to half capacity at least once every 30 days. If this is not done, it is very likely that the device will
  malfunction, and the repair will not be covered by the warranty.

• If the indoor storage temperature is below 0°, do not charge the quad bike immediately. Before charging, you must place the quad bike in a warmer environment (5–40°C) for at least 2 hours. Store the quad bike indoors, in a dry place and at the correct storage temperature.

SAFETY GUIDELINES AND PRECAUTIONS

•  The box contains small parts that can be dangerous for children. Always store the product out of the reach of children. The bags can cause suffocation if placed on the head and the parts they contain are a choking hazard.

• Failure to follow basic instructions and any of the following safety precautions may result in damage to the motorcycle, loss of manufacturer‘s warranty, other property damage, serious injury and even death.
  Always use only original accessories, including the battery. If incompatible accessories are used, you risk voiding the warranty and possible damage to the device.

• Before each use, check the technical condition of the quad bike.

• Always check the brakes and tyre condition before riding. Make sure that there are no objects in the wheel wells that interfere with riding!

• Look where you are going and perceive the road conditions, people, places, property and objects around you.

• Operate the quad bike with consideration for pedestrians, cars and cyclists.

• Give your full attention to riding.

• It is strictly forbidden to use a mobile phone or another similar device while riding.

• Do not ride a quad bike unless it is permitted in the area.

• Always follow local ordinances and regulations.

• Do not drive in places with a large number of pedestrians.

• Do not remove the signalling elements of the quad bike, such as reflective stickers or LED lighting.

• Do not remove the warning safety and technical labels from the quad. If they become damaged or illegible, contact the manufacturer who can provide you with new labels.

• Never ride in the rain.

• Do not hang bags, backpacks or other objects on the quad bike.

• Do not attempt to disassemble, repair or modify the vehicle in any way. Disassembly, modification or any attempted repair will void the warranty and may result in damage to the unit or even injury or property
  damage.

• Do not operate the vehicle under the influence of alcohol, drugs or other addictive substances and substances affecting the ability to coordinate and react.

• Do not use the quad bike if you are tired or sleepy.

• Use your best judgement to avoid dangerous situations with your quad bike.

• Do not turn sharply, especially at high speeds.

• Do not ride in or near puddles of water, mud, sand, rocks, gravel, or on rough and uneven terrain. There is a risk of damage to the quad bike.

• Do not drive in bad weather: snow, rain, hail, on icy roads or in extreme heat. Skidding can occur more easily on damp or wet roads.

• Do not drive near swimming pools or other large bodies of water.

• Handle the quad bike very carefully when indoors.

• The quad bike is intended for use by one person, NEVER try to ride with two people.

• Children must only operate or otherwise handle the quad bike under the supervision of a qualified adult.

• The same applies to people with reduced mobility.

• Always consider longer stopping distances at higher speeds.

• Do not exceed the maximum load capacity of the quad bike.

• Avoid driving near hazardous or flammable substances.

• In ideal conditions and with a fully charged battery, the quad bike can cover a distance of up to 20 km.

• Factors that affect the maximum range of a quad bike: terrain, rider weight, ambient temperature, weather conditions and driving style.

ADDITIONAL INFORMATION

• For households: The indicated symbol ( ) on the product or in the accompanying documentation means that used electrical or electronic products must not be disposed of together with municipal waste. In order to properly dispose of the product, hand it in at designated collection points, where it will be accepted free of charge. By disposing of this product correctly, you help preserve valuable natural resources and help prevent potential negative impacts on the environment and human health that could result from improper waste disposal. Ask your local authority or nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations. Information for users on the disposal of electrical and electronic equipment (company and business use): For the correct disposal of electrical and electronic equipment, ask your dealer or supplier for detailed information. Information for users to dispose of electrical and electronic equipment in other countries outside the European Union: The above symbol (crossed-out bin) is only valid in the countries of the European Union. For the correct disposal of electrical and electronic equipment, request detailed information from your authorities or equipment dealer. Everything is expressed by the crossed-out bin symbol on the pro- duct, packaging or printed materials.

WARRANTY REPAIRS

•  Please contact your dealer for warranty repairs. In case of technical problems and questions, please contact your dealer who will inform you of the next steps. Observe the rules for working with electrical equipment. The user is not authorised to disassemble the equipment or replace any of its components. There is a risk of electric shock if the covers are opened or removed. Incorrect assembly and wiring of the equipment also exposes you to the risk of electric shock.
• Products are guaranteed for 24 months unless otherwise stated. The warranty does not cover damage caused by non-standard use, mechanical damage, exposure to aggressive conditions, handling contrary to the manual and normal wear and tear. For more information regarding the warranty, please visit www.elem6.com/warranty
• The battery is guaranteed for 24 months, 6 months or 300 cycles (whichever comes first). Keep in mind that the maximum capacity of the battery decreases over time or use. Battery life is also dependent on how the battery is used, charged and stored. The normal warranty period does not cover a reduction in the maximum capacity of the battery or its life cycle as this is not a defect in material.
• Hardware or software interference with the configuration of the device, such as interference with the control unit, motor, battery or other controls, may void the warranty. In this case, the manufacturer is not obliged to accept the device for warranty claim.
• The warranty period does not apply to equipment components referred to as consumables, such as bearings, tyres and tubes, brake discs and pads, light bulbs, etc.
• If the equipment was sold at a reduced price, the warranty does not cover defects or interferences for which the lower price was set.
• The manufacturer, importer or distributor shall not be liable for any damage caused by unauthorised tampering, installation, use contrary to the user manual, normal wear and tear or overloading.
• Out-of-warranty service can be ordered from the manufacturer‘s authorised service centre.
• In order for a warranty claim to be accepted, it is assumed that the equipment has been operated in accordance with this user manual, including operation, maintenance, cleaning and storage. Only equipment that is clean, complete and has been properly packaged for shipment can be accepted for warranty claims.

PREVENTION AND FIRST AID

NOTE
Recommended safety equipment

• In the event of a fire, use a suitable extinguisher (snow CO2, halation, F-500 extinguisher).
• First aid kit in case of an accident.
• Mobile phone for calling emergency services.

ATTENTION

In case of injury, treat the injured person in accordance with the principles of first aid.

• In the event of an electric shock, it is necessary more than ever to emphasize the safety and elimination of the risk to the rescuers. The victim usually remains in contact with the electrical device (the source of  the injury) due to the convulsive contraction of the muscles caused by the electric current. In such a case, it is necessary to first turn off the current in any possible way. Then call the emergency services (112) or another professional service and only then provide first aid! It is necessary to ensure the airways are clear, check breathing, check the pulse, place the affected person flat on their back, tilt their head and pull down their lower jaw. Initiate mouth-to-mouth resuscitation and CPR if necessary.
• If battery fluid gets on your skin, wash it off quickly with soap and water. Seek medical attention if necessary.
• If battery fluid gets into your eyes, flush them with clean water for several minutes. Seek medical attention immediately.

RESIDUAL RISKS

Even if the product is used according to the instructions, it is not possible to exclude all risks associated with its operation. The following risks may occur due to the design of the product:

• Mechanical hazards such as dropping, crushing, cutting, winding, being pulled. These hazards can be caused by rider error, misuse, mishandling of the equipment, underestimation of the situation or fatigue, or unforeseen terrain conditions such as sloping or uneven terrain.
•  Electrical hazards that can be caused by contact with live parts (direct contact) or parts that have become live under faulty conditions (indirect contact).
• Thermal hazards which may result in burns, scalding or other injuries caused by possible contact of persons with high-temperature objects or materials including heat sources.
• Hazards arising from neglect of ergonomic principles in the design of the product, such as hazards caused by poor body positioning or excessive overloading and unnatural to human hand-arm anatomy, rela ting to handle design, product balance, etc.
• Noise hazards which may result in hearing loss (deafness) and other physiological disturbances (e.g. loss of balance, loss of consciousness).
• Vibration hazards that can result in vascular and neurological damage to the hands, such as Raynaud‘s disease.

WARNING!
The product creates an electromagnetic field of very weak intensity. However, this field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult their
physician and pacemaker manufacturer regarding vehicle use.

UNPACKING

• After unpacking the product from the box, carefully inspect all parts.
• Before disposing of the packaging materials, always carefully check whether any parts of the quad bike are left inside the packaging.
• Keep packaging components (plastic bags, clips, etc.) out of reach of children.
• If the product is damaged during unpacking or if the delivery is incomplete, contact your dealer immediately.

BOX CONTENTS

• Quad bike body, handlebars and their mounts (2 upper, 2 lower, 4 screws), front and rear wheels, LCD display, charger, instruction manual, tools.
• Standard accessories are subject to change without notice.
• This product requires assembly. The vehicle must be properly assembled before use.

ASSEMBLY

• We recommend assembling the quad bike with an experienced mechanic. In the case of assembling the quad bike yourself, we recommend two people assemble it.
• Assembly takes approximately 30-40 minutes.
• The initial battery charge can take up to 12 hours.
• Do not shorten this charging time!
• Inflate all 4 wheels to the appropriate pressure (69 kPa / 10 PSI).
• Unpack the quad bike from the box.
• Remove the bolts that attach the quad bike to the iron frame.
• Remove all loose parts from the packaging (quad body, front and rear wheels, charger, and a set of screws and tools).

Step No. 1
Remove the top carton. You remove the screws that hold the metal structure and the screws that attach the quad to the iron structure… fig. 1 to 3.
Step No. 2
Remove all wheels and accessories.. fig. 2.
Step No. 3
Attach the rear frame with the reflector… fig. 4.
Step No. 4
Attach the handlebars… fig. 5 and 6.
Step No. 5
Install the LCD display… fig. 7.
Step No. 6
You mount the gas pedal on the right side of the handlebars, the brake lever on the left side of the handlebars and finally the handlebar keeper… fig. 8.9 to 10.
Step No. 7
Loosen the screws with which it is attached in front of the four-wheels to the iron structure… fig. 11.
Step No. 8
Inflate all four wheels… fig. 12.
Step No. 9
Tighten all four wheels and screws properly… fig. 13 to 14.

FUSE

• There is a box with a fuse under the seat. Switch it to the „ON“ position.

STICKERS

• If the stickers are protected by protective foils, remove the foils.

GEOMETRIE

• After assembly, it is sometimes necessary to adjust the geometry of the front axles.
• Adjust the toe-in/out by turning the steering rod (fig. 1). Loosen both tie rod nuts (one thread is right and the other is left). Enable both mothers (to the same side).
• Align the handlebars and by turning the rod set the desired direction of the wheel (wheel geometry)… fig. 2 and 3. The wheels should be slightly diverging.
•  After adjustment, carefully tighten all nuts.

NOTE
Estimate the geometry adjustments. For such small recreational vehicles, precise adjustment is not critical.

CHECK BEFORE THE DRIVE

RELEASED PARTS

• Before each ride, check that the steering and brake bolts are not loose. There must be no unusual noises, rattling, loose or damaged components.
  BRAKES

• Check the correct operation of the brakes by pressing the lever. If you find that the four-wheeler does not brake, you need to contact an authorized service center.

FRAME, FORK AND HANDLEBAR

• Check for cracked joints or broken parts. If you discover any of these defects on your ATV, contact an authorized service center. Do not use the quad in any case!!!

TIRE PRESSURE

• Check tire pressure (69 kPa / 10–24PSI) and tread condition regularly. Always carry out tire pressure and any re-inflation when cold. In the case of a run-down sample and the need to replace the wheel casing,
  contact the service department.

CONTROLS

The quad bike is controlled only by hands.
RIGHT HAND SIDE

• Lever / Accelerator – speed is regulated with the right handle.

LEFT SIDE HANDLEBAR

• On/Off switch. Turn the red switch to the „on“ position

• Direction switch. The pressed position of the switch means „R“ – reverse driving („R“ will be displayed on the LCD display). The pressed position of the switch means „D“ – drive forward („D“ will be displayed on
  the LCD display).

• Unlocking parking mode. Press this switch before driving. „P“ (parking) disappears from the LCD display.
  Now select “D” or “R” on the drive direction switch and press the gas pedal lever…at that moment the ATV will go into motion.

CHARGING PORT

• The charging connector can be found at the back of the quad bike in the space between the seat and the engine.

OPERATION

• Insert the key into the main switch box located on the right under the handlebars and turn to the right to the „On“ position.
• On/Off switch. Turn the red switch located on the right side of the handlebars to the „on“ position.
• The pressed position of the switch means „D“ – drive forward („D“ will be displayed on the LCD display).
• Press the black switch to unlock the parking position. „P“ (parking) disappears from the LCD display. Now select “D” or “R” on the drive direction switch and press the gas pedal lever…at that moment the ATV will go into motion.

ATTENTION

Never flip the switch while the vehicle is in motion.

• Carefully twist the accelerator (throttle) grip towards you and the quad bike will start moving.
• Stop by releasing the throttle grip.
• Use the brake levers to stop immediately
• right for the front brake, and left for the rear brake.
• When the brake lever is pressed, the motor is automatically disengaged until the brake levers are released again.
• The wheels may „throw“ slightly at higher speeds.

RIDING

PROHIBITED!
Failure to follow the following instructions may result in an accident or injury.
Always apply the throttle slowly and smoothly. Rapid acceleration may result in an accident or injury.
BRAKING

• To stop, release the throttle and press the brake lever. Never brake hard.
• Do not brake when turning. The quad bike could skid or overturn.

TURNING
The correct turning technique is as follows:

1. Turn the handlebars in the direction of the turn.
2. Shift your weight slightly to the inside and on the inner footrest.
3. Tilt your upper body against the centrifugal force.

Turning at higher speeds:

•  Use the same technique as for turning at low speeds, just lean more.
• Since centrifugal forces increase as speed increases, you need to lean your upper body more against the centrifugal force. But remember to keep your weight on the inner footrest.
• The rider should practice this technique at low speeds in a wide-open area until it is mastered.

SKIDDING / SLIDING

•  If unintentional skidding or sliding of the wheels occurs under braking, you can use the following techniques.

Front wheels skidding / slipping

• Try to get front grip by releasing the throttle and leaning forward slightly (shifting your weight forward).

Rear wheels skidding / slipping

• Steer in the direction of the skid (space permitting), move slightly (shift your weight) away from the skid, and avoid using the throttle or brake lever until you regain full control of the vehicle.

ATTENTION
Skidding and sliding can result in an accident, so the rider should take extra care when driving on slippery surfaces and adjust their speed accordingly.

MAINTENANCE

PROHIBITED!
We strongly recommend that you have your quad bike repaired and replaced by an authorised service centre. If you do it yourself, use only original spare parts. In case of an improperly performed service, the customer loses the warranty provided by the manufacturer!

BRAKE ADJUSTMENT

• Loosen the adjusting nut and adjust the horizontal stroke of the brake. Keep brake travel between 5–8 mm. Check the brake lining thickness regularly. If the wear exceeds 1 mm, it should be replaced.
  Regularly check that the brake fluid level is not lower than min. mark. If so, drain the remaining brake fluid and add new (DOT4 only). If the level is fine and the brakes still do not work, the system needs to be bled, so contact your authorized service center.

DIFFERENTIAL OIL

• Unscrew the engine gearbox drain screw located in the lower part of the gearbox… fig. 1. Drain the lubricating oil and then tighten the screw again.
  Remove the engine transmission fuel hole bolt and add 130ml of lubricating oil… fig. 2. Tighten the screws and check for leaks.

• Only use gear oil for highly loaded cardan gears, differentials and gear units… oil type: 80W / 90 GL-4 / 465 ml

TYRE PRESSURE

•  Check tyre pressure regularly (69 kPa / 10 PSI) and sample status.

CONNECTIONS AND SCREWS

• Regularly check the tightness of all connections and screws.

TROUBLESHOOTING

motorcycle if it is overloaded, or if the driving conditions are too extreme. The fuse must be manually deactivated.
Fuse blown due to overload| Replace blown fuse with a new one
Loose wires or connectors| Check and secure all wires and connectors
Non-functioning battery| An old or unmaintained battery can be inoperable. Replace the battery with a new one.
Uncharged battery| Charge the battery properly according to the instructions.
Damaged/failing switches or motor| Have it checked and repaired at an authorised service centre.
Quad starts, but suddenly stops| Loose wires or connectors| Check and secure all wires and connectors
Short circuit fuse activated| The fuse will stop the motorcycle if it is overloaded, or if the driving conditions are too extreme. The fuse must be manually deactivated.
Reduced operating time| Uncharged battery| Charge the battery properly according to the instructions.
Old battery no longer at full capacity| Replace the battery with a new one.
Quad motor power is weak| Loose wires or connectors| Charge the battery properly according to the instructions.
Old battery no longer at full capacity| Replace the battery with a new one.
Quad bike is overloaded| D
Do not overload the quad bike, use it in accordance with the operating instructions.
Driving conditions are too bad/ difficult| The quad bike is designed for operation on level ground. Do not operate the quad in excessively difficult terrain or in poor driving conditions.
Intermittent operation| Loose wires or connectors| Check and secure all wires and connectors
Damaged/failing switches or motor| Have it checked and repaired at an authorised service centre.
Motor (gearbox) is making loud noises (clicking, grinding, etc.)| Damaged motor or gearbox| Have it checked and repaired at an authorised service centre.
Charger heats up while charging| This is quite usual| No need to take any action
Battery gurgles or hisses when charging| Some noises when charging are normal| No need to take any action

NOTE
The table contains a list of the most common faults and how to resolve them. If you are not sure how to resolve the issue or the issue can’t be resolved, always contact an authorised service centre.

TECHNICAL AND CONSUMER INFORMATION

SERIAL NUMBER LOCATION

•  The serial numbers of the frame or engine are used to identify the vehicle. You will need this information when ordering spare parts and when enquiring about technical details or warranty.

SERVICE AND SPARE PARTS

•  In the event of a malfunction, have this product repaired by an authorised service centre.
•  For technical assistance, repair or to order original spare parts, we recommend that you always contact the nearest authorised service: elem6.com/warranty
• Information on service locations can be found at elem6.com/warranty

DECLARATION OF CONFORMITY

The company elem6 s.r.o. hereby declares that all devices with the reference designation LAMAX eBumbleBee ATV60M supplied by the manufacturer elem6 s. r. o. to the EU market are in compliance with the basic requirements and other relevant provisions of the directive 2014/30/EU, 2011/65/EU Annex II 2015/863 and 2006/42/EC. The products are intended for sale without restrictions in Germany, the Czech Republic, Slovakia, Poland, Hungary and other EU member states. The warranty period for products is 24 months unless otherwise specified. The warranty period for the battery is 24 months, and 6 months for its capacity. The Declaration of Conformity can be downloaded from www.lamax- electronics.com/support/doc.

MANUFACTURER:
elem6 s.r.o.,
Braškovská 308/15, 16100 Prague 6, Czech Republic www.lamax- electronics.com
Printing errors and changes in the manual reserved.

References

• LAMAX Electronics | EN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>