LAMAX W10.1 Action Camera User Guide
- June 3, 2024
- LAMAX
Table of Contents
W10.1 Action Camera
User Guide
W10.1 Action Camera
|
---|---
https://www.lamax-
electronics.com/downloads/w101/app
https://www.lamax-electronics.com/downloads/w101/manual
PACKAGE CONTENTS
- LAMAX W10.1 action camera
- Case, waterproof up to 40 m
- Remote control, waterproof up to 2m
- Li-ion battery
- Micro USB cable for charging / transferring files
- Microfibre cloth
- Mini tripod
- Mounts
INTRODUCTION TO THE CAMERA / CONTROLS
A POWER
B REC button
C MODE button
D Door to micro USB and micro HDMI connectors
E Door to battery and microSD card slot
F Thread to attach the camera to a tripod or selfie stick
Note: To avoid damaging the camera, only use the recommended accessories.
Camera controls
Turn on and off| Hold down the POWER button or drag your thumb down and then
press the POWER icon
---|---
Select a mode| Touch the icon or press the MODE button drag your thumb up to
select the desired mode
Mode settings| Touch the icon 4K60 or press the „POWER”
Settings| Touch the icon
View files| Touch the icon
Switch between displays| Hold down the MODE button
Return back| Touch the icon <
USING THE CAMERA FOR THE FIRST TIMF
A Insert the microSD card into the camera as shown (connectors toward the lens)
- Press the lock button at the bottom of the camera. Slide the door outwards and open it.
- Insert the card only when the camera is turned off and not connected to the computer.
- Format the card directly in the camera itself the first time you use it.
- We recommend memory cards with a higher write speed (UHS Speed Class – U3 and higher) and a maximum capacity of 256 GB.
- Note: Only use microSDHC or SDXC cards from reputable manufacturers. Generic cards do not guarantee the proper functioning of the data storage.
B Connecting the camera to the power
- You can charge the camera either by connecting it to a computer or using an optional AC adapter.
- It takes approximately 4.5 hours to charge the battery from 0 to 100 %. The charge indicator turns off after charging.
- Note: Charging the battery from 0 to 80 % takes 2.5 hours.
WIFIAPPLICATION
Thanks to the mobile app, you will be able to change camera modes and settings or view and download recorded videos and photos directly to your mobile device.
A Scan the QR code to download the application.
B Install the application on your mobile device.
C Turn on WiFi on the camera by swiping down and then touching the WiFi icon.
B On your mobile device, connect to the WiFi network with the camera’s name.
The WiFi password is displayed on the camera screen (factory setting is
12345678).
FLIPTHFP INFOPMATION
For complete instructions, firmware updates and the latest news about LAMAX
products scan the QR code.
http://www.lamax-electronics.com/lamax-w101
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>