Comfort Zone CZ45E Fan Forced Personal Heater Instruction Manual

: June 13, 2024
: Comfort Zone

Table of Contents

Comfort Zone CZ45E Fan Forced Personal Heater
Features
INTENDED USE
IMPORTANT INSTRUCTIONS
IMPORTANT SAFETY FEATURES
CARE AND MAINTENANCE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Comfort Zone CZ45E Fan Forced Personal Heater

Features

Adiustable Thermostat
Three Heat Settings:
- E nergy S ave Mode
- High – 1500 watts (5120 BTU)
- Low – 600 watts
Fan Only Setting
Safety Tip-Over Switch
Power Indicator Light
Safety Overheat Protection
Comfortable Carry Handle
Stay Cool Body
120V A.C., 60Hz, 12.5A

INTENDED USE

This product is intended for indoor residential and office use only, not for industrial or other commercial applications. Use only electrical wiring that is in good working order and that meets applicable codes and ordinances. This heater must be plugged into a 120V AC, 15 Amp. (or larger) circuit. Do not plug anything additional into the same circuit. If you have any questions about whether your wiring is adequate, consult a qualified electrician. Risk of fire, overheating, malfunction, property damage, injury, or even death may result if not adhered to. Use your heater fan only with a working smoke detector located in the vicinity of your heater/fan. While using your heater/fan, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of those instructions, we have used the word “WARNING” to indicate the level of hazard:

WARNING indicates a hazard which, if not avoided, could result in injury or death

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

Read all the instructions before using this heater/fan.
This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use the provided handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater fan and keep them away from the sides and rear.
Do not use the heater unattended. Use of extreme caution is necessary when any heater is used by or near children, invalids, disabled persons, or pets.
Do not operate the heater with a damaged power cord or after the heater malfunctions, or has been dropped or damaged in any manner. Return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
Do not use a heater outdoors.
Use your heater only in dry environments. This heater is not intended for use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools, or other sources of water. Never locate the heater where it may fall into a bathtub or other water container. Do not use it in damp environments such as flooded basements.
Do not place the heater on a small, unlevel, uneven, or any surface that might allow the heater to tip or fall.
For proper operation, the heater should be placed on a smooth, non-combustible surface. Do not place on rugs, carpets, vinyl flooring, or other plastic surfaces. Not for use outdoors or in wet areas.
This heater is not designed as a primary heat source.
Always plug heaters directly into a wall outlet/receptacle. Never use an extension cord or relocatable power tap (outlet/power strip). Always unplug the heater when not in use.
Do not run the power cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from the traffic area where it will not be tripped over.
To disconnect the heater, turn the controls off then remove the plug from the outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons or property.

WARNING: SHOCK HAZARD
Use your heater only in dry environments. This heater is not intended for use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate the heater where it may fall into a bathtub or other water container. Do not use a heater outdoors. Do not use it in damp environments such as flooded basements.

WARNING: HOT SURFACES
Do not touch the body of the heater when in use. This heater is hot when in use, to avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.

WARNING: FIRE HAZARD
The heater has hot and arcing or sparking parts inside. Do not use near combustible materials flammable gases or sources of heat. DO NOT USE in areas where gasoline, paint, or flammable materials are used or stored. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage to the heater.

WARNING: ELECTRICAL SHOCK HAZARD
Do not use a damaged cord or plug. Use with adequate electrical system that is up to code.

The supply cord has a polarized plug. As a safety feature, this plug will fit in a polarized outlet only one way. To prevent electric shock, match the wide blade of the plug to the wide slot, and fully insert the plug. If the plug does not fit contact a qualified electrician.

Do not operate any heater with a damaged cord or plug or after heater malfunctions, has been dropped or damaged in any manner. Do not operate the heater with a broken heating element or ceramic cone or any visual imperfections. For repairs covered under warranty, see warranty statement. For all other repairs contact Comfort Zone® Customer Service by telephone or mail for information and assistance

PET OWNERS NOTE
The health of birds and some small pets is extremely sensitive to the fumes given off during the initial use of many appliances. Although these fumes are not harmful to humans, it is recommended that this heater not be used around birds and small pets during its initial use until the manufacturing corrosion coatings burn off.

USAGE:
HEATER OPERATION: Always operate the heater in the upright position following all instructions and recommendations listed in this manual HEATER

LOCATION: Place the heater in the area of the room that is coldest.

HEATER CONNECTION: Plug the heater directly into 120 volts A.C., 60 Hz wall outlet. Be sure the plug fits tightly in the outlet. A loose connection may cause overheating and damage to the plug or heater. NOTE: To prevent overloading a circuit, do not plug the heater into a circuit that is servicing other electrical needs. Power Indicator Lights: This heater is equipped with a Power Indicator Light. The power light will illuminate when the unit is turned on.

TURNING HEATER ON: To start the heater, turn the Power Control dial from the OFF position to the FAN, LOW, HIGH, or ENERGY SAVE setting. Then rotate the Thermostat Control clockwise to the HIGH THERMOSTAT position as described below. (During the heater’s initial use, you may experience a slight odor or smoking. This is the result of the heating element lubrication “burning off”. This is normal and will go away after a few minutes of use.)

POWER CONTROL DIAL: This heater has 3 heat settings: ENERGY SAVE, HIGH, and LOW. Select the heat setting that best meets your heating needs. The ENERGY SAVE heat setting provides comfortable heating in most rooms while saving you money on energy costs.

SETTING THERMOSTAT: After the heater has been turned on and the room has reached the desired temperature, slowly rotate the thermostat knob counter- clockwise until the heater shuts off (you should hear a faint “click”). By leaving the thermostat at this setting it will automatically maintain this temperature. To lower the temperature, rotate the knob further counter- clockwise (towards the LOW position). To raise the temperature, rotate the thermostat knob clockwise (towards the HIGH position).

TO OPERATE FAN ONLY: Turn the Power Control dial to the Fan setting. Turn the thermostat fully clockwise so the fan will run continuously
TURNING OFF: To disconnect the heater, turn the controls off, then remove the plug from the outlet.

IMPORTANT SAFETY FEATURES

The power indicator light, located near the control panel, lights whenever the heater or fan is turned on. The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the heater grill is obstructed, or if the heater gets too hot for any reason, the automatic overheat protection device will turn the heater off. To reset the heater, simply turn the power off and unplug the heater for 10 minutes until it cools down and you may plug in and restart the heater. Be sure that the heater is on a smooth level surface with no obstructions. The heater is also equipped with a safety tip-over switch to turn the power off the heater when the heater tips over. To resume heater functions simply stand the heater upright

CARE AND MAINTENANCE

CLEANING : CAUTION- Before cleaning the heater be sure to disconnect the power cord and allow the heater to cool completely. Clean the outside surface with a clean damp cloth. Do not use harsh chemicals or abrasive cleaners. DO NOT IMMERSE THE HEATER

IN WATER. Allow the heater to dry completely before use.
REPAIR: DO NOT OPERATE THE HEATER WITHOUT THE GRILL IN PLACE. DO NOT USE THE HEATER IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
STORAGE: Keep the original carton for storage of the heater. Coil and tie the power cord to avoid damage during storage.

SAVE THESE INSTRUCTIONS

WARRANTY

LIMITED WARRANTY
This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period of one year from the date of the original purchase. If this unit fails because of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. After 30 days, but within the warranty period, if the unit was purchased within the continental United States, return it, freight prepaid, to World and Main for repair or replacement. If the unit was purchased outside the continental United States, return the unit to the place of purchase. This warranty does not cover damage caused by misuse, abuse, overheating, or alteration. Repairs made by anyone other than World and Main are not covered in this warranty. World and Main will not be held liable for any losses due to neglectful operation. All implied warranties, including the warranties of merchantability and of fitness of purpose, if applicable, are hereby limited in duration to the period of one year from the date of original retail purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Incidental or consequential damages arising from a breach of either express or implied warranties are hereby disclaimed and excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. Upon the expiration of this warranty, all such liability will terminate. No other warranties are expressed or implied.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No informal dispute settlement mechanisms are available. This limited warranty is given in lieu of all other warranties

Energy Save Technology helps save energy and reduces your heating costs. The Energy Save heat setting provides comfortable heating using 30% less energy than a standard heater*!

Note: Compared to a 1,500-watt space heater on high heat. Patent Pending

Manufactured for: