INTELLINET 510530 WDM Bi Directional Ethernet Media Converter Instructions
- June 13, 2024
- INTELLINET
Table of Contents
INTELLINET 510530 WDM Bi Directional Ethernet Media Converter
Important : Read before use.
For additional benefits:
Scan to register your product warranty or go to:
register.intellinet-network.com/r/510530
register.intellinet-network.com/r/510547
register.intellinet-network.com/r/545068
register.intellinet-network.com/r/545075
Thank you for purchasing the Intellinet WDM Bi-Directional Single Mode Media
Converter. Media converters connect two Ethernet networks over a longer
distance using fiber optic cable.
WDM BI-DIRECTIONAL VERSUS STANDARD MEDIA CONVERTER
Standard Media Converter
To create a connection between two media converters you need two fiber cables,
referred to as a fiber duplex cable.
WDM Bi-Directional Converter
One fiber cable between both media converters is sufficient in order to create
a connection. The signal travels both ways.
MODELS
-
Fast Ethernet WDM Bi-Directional Single Mode Media Converter (510547)
10/100Base-TX to 100Base-FX (SC) Single-Mode, 20 km (12.4 mi.), WDM (RX1550/TX1310) -
Fast Ethernet WDM Bi-Directional Single Mode Media Converter (510530)
10/100Base-TX to 100Base-FX (SC) Single-Mode, 20 km (12.4 mi.), WDM (RX1310/TX1550) -
Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter (545068)
10/100/1000Base-TX to 1000Base-LX (SC) Single-Mode, 20 km (12.4 mi.), WDM (RX1550/TX1310) -
Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter (545075)
10/100/1000Base-TX to 1000Base-LX (SC) Single-Mode, 20 km (12.4 mi.), WDM (RX1310/TX1550)
Connections
Twisted Pair–RJ45
Connect the UTP port of the media converter to an RJ45 port on the network;
e.g., to an Ethernet switch.
Cat5e or better cabling is recommended.
Fiber Optic
As shown above, one fiber optic cable needs to be connected between two WDM
media converters. As a rule, these media converters must be used in pairs.
Model 510547 connects to model 510530 (Fast Ethernet), and model 545068
connects to 545075 (Gigabit Ethernet).
Power
Plug the power adapter into the 5 V DC input jack on the media converter, then connect it to a regular power outlet. Only use the included power adapter or one with matching specifications (output of 5 V DC, at least 1 A).
Status
| LEDs | Description |
|---|---|
| PWR | The power adapter is connected when lit. |
| 1000M | 1000 Mbps link on the twisted |
pair connection when lit.
100M| 100 Mbps link on the twisted
pair connection when lit.
Link/Act (TP = RJ45; FX = Fiber)
| Active link when lit; data traffic when flashing; no active network link when unlit.
FDX/COL (for TP/RJ45)
| Full duplex connection when lit; data collisions when flashing; half duplex
when unlit.
SD (for FP/Fiber)| Fiber optic signal is detected when lit; no signal
when unlit.
For specifications, go to intellinet-network.com. To register your product warranty, go to the weblink or scan the QR code for your model, which you can find on the cover of this manual.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality
WARRANTY
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manufacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment. CE/UKCA This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and/or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity is available at:
support.intellinet-network.com/barcode/510530
support.intellinet-network.com/barcode/510547
support.intellinet-network.com/barcode/545068
support.intellinet-network.com/barcode/545075
North America
IC Intracom America 550 Commerce Blvd. Oldsmar, FL 34677 USA
Asia & Africa
IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei
City 221 Taiwan
Europe
IC Intracom Europe Löhbacher Str. 7, D-58553 Halver Germany
All trademarks and trade names are the property of their respective owners
intellinet-network.com
© IC Intracom. All rights reserved. Intellinet is a trademark of IC Intracom,
registered in the U.S. and other countries
Printed on recycled paper.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration
- Intellinet Network Solutions Account and Product Registration
- Intellinet Network Solutions Account and Product Registration
- Intellinet Network Solutions Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>