Lighting Olympia F21 Pixel chasing series led neon flex Installation Guide
- June 5, 2024
- Lighting Olympia
Table of Contents
Lighting Olympia F21 Pixel chasing series led neon flex Installation Guide
Dimension
-
Gross weight: 0.52kg/m
-
Controlled: SPI controller
-
Installation Temp.: 0°C to +55°C
-
Ambient Temp.: -25°C to +55°C
-
Min. Bending : 120mm
-
Beam Angle : 270 degree
Eco-friendly PVC Housing material
Features
- Uniform and even light output
- Dome surface with 270 degree beam angle
- UCS8903, 8904 IC built in
- Connect with SPI/TTL Signal Controller
- Full encapsulated with IP68 Level
- High Reliability
- 3 or 5 Years warranty
Applications
-
Building facade, outline
-
Applications
-
Cove lighting
-
Sign and advertising lighting
-
Linear lighting
-
Additional lighting
-
Decorative lighting
Model Encoding
Technical Specification
Model | F21-24V-5050-70-SPI-RGB | F21-24V-5050-56-SPI-RGBW |
---|---|---|
Operating voltage | 24V | 24V |
Power consumption | 16W/M | 15W/M |
Working Mode | SPI(8903) | SPI(8904) |
LED type | SMD5050 | SMD5050 |
LED Quantity | 70 pcs/m | 56 pcs/m |
Available Color | RGB/3000K/DW | RGBW(2200K/3000K/4000K) |
Min. cutting Unit | 7 LEDs | 7 LEDs |
Min. cutting length | 10cm | 12.5cm |
Pixels Qty/m | 10 Pixels | 8 Pixels |
Max. length single feed | 8m | 8m |
Max. length double feed | 16m | 16m |
Bending direction | Horizontally | |
Lumen maintenance | 70 000 Hours L70 25°C , 50 000 Hours L70 50°C | |
Housing material | Eco PVC | |
Installation temperature | 0°C to +55°C | |
Ambient temperature | -25°C to +55°C | |
Ingress protection | IP68 wet location submersible* to 2m | |
Warranty | 3 years as standard, 5 years warranty maximum |
Construction
Physical Specification
Min. bending diameter
Mold injection connector
DIY snap & screws kit (IP67 Only)
Other Accessories
Female & Male Connector
Mounting Channel
Model
| Description| Dimension|
Drawing
---|---|---|---
ALC15S01| Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy
Optional color:AS/AB/PW Type: Standard| |
ALC15S02| Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy
Optional color:AS/AB/PW Type: Anti-drop for upside down installation| |
ALC15H02| Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy
Optional color:AS/AB/PW Type: Cable hiding| |
ALC15V01| Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy
Optional color:AS/AB/PW Type: Vertical installation| |
ALC21S01| Use for : F15 & F21 Length option:1m,2m,35mm Material:Aluminum alloy
Optional color:AS/AB/PW Type: Standard| |
SSC15FLX| Use for : F15 & F21 Length option:10cm,30cm,50cm,100cm Material:
Stainless steel Optional color: Polished Type: Flexible|
|
SSC15S01| Use for : F15 & F21 Length option: 5cm Material: Stainless steel
Optional color: Natural color Type: 316 stainless steel| |
PC15S01| Use for : F15 & F21 Length option:1m,2m,35mm Material:Plastic Color:
Transparent Type: Standard| |
Packing
Standard: Carton ( Paper reel inside)
Custom: Carton ( White box+plastic plate inside)
Testing
- Please note it is under normal range if there is 20-30% yellowing of PVC housing material when the product is used under direct sunlight or long-term high temperature & wet enviroment in 3 years.
- About the tolerance range of optical parameters (luminance, CCT, Watt, RA) for all product, the volume is plus and minus 10% fluctuation refering to IEC Standard.
- It’s normal for the tolerance range in total length, it occurs from the different production technology, environmental temperature and installation. the volume would be 0.1-5M±7mm, 5.1-10M±15mm, 10.1-20M±30mm.
Loading Chart
Power supply
Rated power | 35W | 60W | 75W | 80W | 100W | 120W | 150W | 185W | 240W | 320W |
---|---|---|---|---|---|---|---|---|---|---|
12W | 2m | 4m | 5m | 6m | 7.5m | 8m | 10m | 12.3m | 16m | 20m |
15W | 1.5m | 3m | 4m | 4.3m | 5m | 6m | 6.5m | 9.5m | 15m | 17m |
18W | 1.5m | 2.5m | 3m | 3.5m | 4m | 5m | 6m | 8m | 10m | 14m |
Lead Type
Note: These are the max recommended run lengths based on power supply,the signals transfer from the left end. For example: It is recommended to use one 80W power supply for a single-feed run of 6m at 12W/m.
Recommendation of extension wire
Maximum extension wire length according to Light power
Watts of light
| 22AWG| 20AWG| 18AWG| 17AWG| 16AWG| 14AWG|
12AWG| 10AWG
---|---|---|---|---|---|---|---|---
| 0.34mm 2| 0.53mm 2| 0.82mm 2| 1.04mm 2| 1.38mm 2|
2.07mm 2| 3.29mm 2|
5.62mm 2
10W
| 36m| 60m| 100m| 120m| 140m| 240m| 400m| 600m
20W| 18m| 30m| 50m| 60m| 70m| 120m| 200m|
300m
30W
| 12m| 20m| 30m| 38m| 45m| 80m| 130m| 200m
40W| 8m| 15m| 22m| 28m| 35m| 60m| 95m|
140m
50W
| 6m| 12m| 18m| 22m| 28m| 48m| 75m| 105m
60W| 5m| 10m| 15m| 18m| 22m| 36m| 60m|
88m
70W
| /| 8m| 12m| 14m| 18m| 30m| 50m| 72m
80W| /| 6m| 10m| 11m| 14m| 24m| 40m|
58m
90W
| /| 4m| 7m| 8m| 10m| 18m| 30m| 45m
100W| /| /| 5m| 6m| 7m| 12m| 22m|
32m
110W
| /| /| 3m| 4m| 5m| 8m| 15m| 22m
120W| /| /| 2m| 2.5m| 3m| 0m| 8m|
12m
Note:
- The values doesn’t include the 0.6m cable connected to the front connector.
- To ensure the reliability of wire connection and avoid problem of voltage drop, the extension wire length should be smaller than the above recommended values.
Connection Diagram
SPI LED NEON Connection
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>