OLIGHT Haloop Pro High End And Versatile Lighting User Manual

: June 17, 2024
: OLIGHT

Table of Contents

OLIGHT Haloop Pro High End And Versatile Lighting
IN THE BOX
SPECIFICATIONS
REMOTE
PRODUCT OVERVIEW
POWER BANK FUNCTION
ROTARY KNOB SWITCH OPERATING INSTRUCTIONS
REMOTE CONTROL OPERATION
How to use the APP
FCC STATEMENT
WARRANTY
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLIGHT Haloop Pro High End And Versatile Lighting

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
PRODUCT

IN THE BOX

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-1

SPECIFICATIONS

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-2

REMOTE

FEATURE SPECIFICATION

Control Distance: 25 meters(in an open, unobstructed environment.)
Dimensions: (D)56(H)24mm / (D)2.20(H)0.94in
Weight: 40g / 1.41oz
Battery: 3.0V 210mAh (0.63Wh)
Waterproof Level: IPX5 (No waterproofing requirements after a fall)
Max Drop Height: 0.8m

The above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference. Actual data varies with specific conditions.

PRODUCT OVERVIEW

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-4

CHARGING
Before first use, please fully charge the product. Connect one end of the provided USB-C cable to an external USB-C power source (power adapter not included), open the silicone dust plug that shields the USB-C charging port of the product, and then insert the other end of the cable into the USB-C charging port.

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-6

Standard Charging Time: About 4.5 Hours (18W Charging)

When charging, the battery icon indicator displays the remaining battery level.
When discharging, the battery-icon indicator displays the remaining battery level.
When rotating the rotary knob switch, the battery-icon indicator turns on (automatically turns off after 5 seconds), and the battery-icon indicator displays the remaining battery level.

NOTE: Best charging efficiency with an 18W or higher-capacity power source.

POWER BANK FUNCTION

Built-in with an 11200mAh battery pack consisting of 4 Li-ion batteries, it can charge phones and other digital devices.

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-10

FIXING THE ACCESSORY INSTALLATION GUIDE

Pass the two attachment straps through the holes on the top of the adapter.
Affix the adapter to the hub of the hanging umbrella using its strap.
Hold down the LOGO buckle and pull the lamp body outwards.
Close the lamp body around the installed adapter and ensure the latch is secure.

ROTARY KNOB SWITCH OPERATING INSTRUCTIONS

Switch on/off: Rotate the knob switch clockwise to turn on; rotate counterclockwise to turn off.
Change brightness level Steplessly: Rotate the knob switch clockwise to increase the brightness level. The output changes in the following order: warm light low→warm light high→white light low→white light high. Rotate the knob switch counterclockwise, and the output will change in the reverse order. A short vibration prompt occurs when switching between warm light and white light.
Sleep Mode: The Haloop Pro automatically enters sleep mode after being turned off for approximately 8 hours with no operation. During sleep mode, both the remote control and APP control will be disabled. Use the knob switch to reactivate the product.

REMOTE CONTROL OPERATION

When the light is off, press to turn on. press again to increase the brightness level. Press and hold to switch to the highest warm light. Press and hold again to swich to the highest white Light.
When the light is on, Press to decrease the brightness level. Press and hold to turn it off. Press to turn off when the lowest warm light is on.

Pairing the remote control and product: When the remote control and product both enter pairing mode, they will be paired automatically.
Remote control pairing mode: Press and hold the key and the key simultaneously for about 1 second until the red indicator flashes and the remote control enters the pairing mode.
Haloop Pro pairing mode: Quickly turn on and off three times, and the product will enter pairing mode, with a long vibration. In the pairing mode, the warm light will flash at low brightness. Once paired successfully, the light will switch to the lowest warm light. The pairing mode will last for approximately 3 minutes, and it will automatically exit if the pairing is not completed within the time limit.

How to use the APP

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-17

Perform a quick continuous shutdown of the host for 3 times, and the host will vibrate for a long time to indicate that it has entered the code state. In the code pairing state, the warm light will flash at low brightness.

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-19

DANGER

DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.

WARNING

DO NOT store the product in a car or any place where the temperature may exceed 60℃.
When the charging port is not in use, please keep the dust plug inserted to prevent dust or foreign matters from entering.
DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
DO NOT disassemble the product.
DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.
Please prevent it from falling and handle it with care.
Please DO NOT try to open the spring clamp wider than the allowed range.
Otherwise, the product may suffer irreversible damage.

NOTICE

Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
Please fully charge the battery before storing the product for a long time.
High-frequency operation or simultaneous control of multiple devices may result in data congestion, and delayed or interrupted device response. Please try to perform the operation again or refresh the device status.
When pairing multiple devices simultaneously, the connection process is completed one by one. If a device is not connected within 3 minutes, the connection will fail. It is recommended to limit the number of devices connected to the network to less than 5PCS.
The operating temperature for charging the Haloop Pro is -10 ℃ to 55 ℃, while the operating temperature for discharging is -20 ℃ to 55 ℃. It’s important to note that extremely high or low-temperature environments may prevent the Haloop Pro from being charged or discharged.
When Haloop Pro is discharged via Type C cable with a white light on. The discharging will stop after 1 minute to ensure the products’ battery safety.
The maximum effective control distance of the remote control and the APP control is 25 meters in an open, unobstructed environment.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

FCC ID: CONTAINS FCC ID:2ANDL-BTU

OLIGHT-Haloop-Pro-High-End-And-Versatile-Lighting-
FIG-21

FCC STATEMENT

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FCC ID: 2A3J6-HALOOP PRO

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF WARNING STATEMENT: The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal use conditions, we provide conditional quality assurance as appropriate.