Intellinet 510493 IMC-SFPG Gigabit Ethernet to SFP Media Converter Instructions

June 13, 2024
INTELLINET

Intellinet LOGO Gigabit Ethernet to SFP Media Converter
Instructions Model 510493 (IMC-SFPG)

510493 IMC-SFPG Gigabit Ethernet to SFP Media Converter

Intellinet 510493 IMC SFPG Gigabit Ethernet to SFP Media
ConverterImportant: Read before use.

For additional benefits: Scan to register your product warranty or go to: register.intellinet-network.com/r/510493

Intellinet 510493 IMC SFPG Gigabit Ethernet to SFP Media Converter - QR
Code https://register .intellinet-network.com/r/510493

For specifications, visit intellinet-network.com. To register your product warranty, go to the weblink or scan the QR code for your model, which you can find on the cover of this manual.
Model

  • 510493: 10/100/1000Base-TX to SFP slot, empty

Connections

Intellinet 510493 IMC SFPG Gigabit Ethernet to SFP Media Converter -
Connections

Fiber Optic
This product requires an SFP transceiver module that provides fiber optic connections.

  1. Insert the transceiver into the media converter and route the fiber optic cable into the transceiver.
  2. Route the other end of the fiber optic cable into a suitable port in your fiber optic network.

Maximum length and fiber cable specification depend on the model.
Twisted Pair – RJ45
Connect the UTP port of the media converter to an RJ45 port on the network (e.g., to an Ethernet switch). Cat5e or better cabling is recommended.

Front panel

Intellinet 510493 IMC SFPG Gigabit Ethernet to SFP Media Converter - Front
panel

LED Description
PWR The power adapter is connected when lit.
1000M 1000 Mbps link on the twisted pair connection when lit.
100M 100 Mbps link on the twisted pair connection when lit.

FX/ACT
TP/ACT
(TP = RJ45; FX = FIBER)|  –Active link when lit;
–Data traffic when flashing;
–No active network link when unlit.
FDX/COL (for TP/RJ45)|  –Full duplex connection when lit;
–Data collisions when flashing;
–Half duplex when unlit.

Rear Panel

Intellinet 510493 IMC SFPG Gigabit Ethernet to SFP Media Converter - Rear
Panel

Power
Plug the power adapter into the 5 V DC input jack on the media converter, then connect it to a regular power outlet. Only use the included power adapter or one with matching specifications (output of 5 V DC, at least 1 A).

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.
WARRANTY AT:intellinet-network.com 

REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manuafacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.
CE/UKCA
This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity for is available at: support.intellinet- network.com/barcode/510493

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
---|---|---

All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved.
Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.

Intellinet LOGO intellinet-network.com
Printed on recycled paper.
INT_510493_QIG_0823_REV_5.11

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

INTELLINET User Manuals

Related Manuals