RS6100 Wearable Scanner User Guide

ZEBRA Wearable Scanner User Guide

Batteries

Batteries for RS5100 and RS6100 Wearable Scanners

BTRY-RS51-4MA-01

Lithium Ion battery, standard capacity 480 mAh. Power Precision+ advanced battery technology, provides higher level of intelligence on battery state of charge and state of health.

BTRY-RS51-7MA-01

Lithium Ion battery, extended capacity 735 mAh. Power Precision+ advanced battery technology. Provides longer run time than standard battery and cold operation to -30oC.

BTRY-RS51-7MA-10
10-pack Extended Battery

BTRY-RS51-7MA-02
India/South Korea Extended Battery

Corded Adapters

Corded Adapter for RS5100 & RS6100 Wearable Scanners

CBL-RS5X6-ADPWT-01

RS5100 / RS6100 Corded Adapter for WT6000 and WT6300, Terminal Supplies Power to Scanner, Communication via Bluetooth. Replaces battery in RS5100 or RS6100.

CBL-RS5X6-ADPTC-01

RS5100 / RS6100 Corded Adapter with USB-C connector for TC21, TC26, TC53 and TC58. Terminal Supplies Power to Scanner, Communication via Bluetooth. Replaces battery in RS5100 or RS6100.

Charging Options

Single Cradles

RS6100 Four Slot Ring Scanner Cradle

CRD-RS61-4SCHG-01: Four slot charge-only cradle, charges four RS6100 ring scanners. LEDs on the RS6100 indicate charge status of each ring scanner.

Requires: Power Supply PWR-BGA12V50W0WW, DC Line Cord CBL-DC-388A1-01 and Country Specific 3 wire AC Line Cord.

Additional accessories for single slot cradle

PWR-BGA12V50W0WW
Level VI AC/DC Power Supply (Brick, replacement for PWRS-14000-148R)
AC Input: 100-240V, 2.4A
DC Output: 12V, 4.16A, 50W
Requires: DC line cord and Country specific grounded AC line cord. Additional accessories for single slot cradle

CBL-DC-388A1-01
DC Line Cord for running the single slot cradles or battery chargers from a single
Level VI power supply PWRBGA12V50W0WW, Level VI replacement for PWRS-14000-148R.

23844-00-00R
US AC line cord, 7.5 feet long, grounded, three wire for power supplies.

Charging LED indicators

Single Cradles

RS6100 / RS5100 Eight Slot Battery Charger

SAC-RS51-8SCHG-01: Eight slot spare battery charger, charges eight RS6100 / RS5100 batteries. LEDs on the cradle indicate charge status of each battery.

Requires: Power Supply PWR-BGA12V50W0WW, DC Line Cord CBL-DC-388A1-01 and Country Specific 3 wire AC Line Cord.

Additional accessories for single slot cradle

PWR-BGA12V50W0WW
Level VI AC/DC Power Supply (Brick, replacement for PWRS-14000-148R)
AC Input: 100-240V, 2.4A
DC Output: 12V, 4.16A, 50W
Requires: DC line cord and Country specific grounded AC line cord.

CBL-DC-388A1-01
DC Line Cord for running the single slot cradles or battery chargers from a single Level VI power supply PWRBGA12V50W0WW, Level VI replacement for PWRS-14000-148R

23844-00-00R
US AC line cord, 7.5 feet long, grounded, three wire for power supplies.

Charging LED indicators

Multi-Slot Cradle

RS6100 20-Slot Ring Scanner Cradle

CRD-RS61-20SCHG-01: 20 slot cradle, charges twenty RS6100 ring scanners. LEDs on the RS6100 indicate charge status of each ring scanner.

Requires: Power Supply PWR-BGA12V108W0WW, DC Line Cord CBL-DC-381A1-01 and Country Specific 3 wire AC Line Cord.

Additional accessories

PWR-BGA12V108W0WW
Level VI AC/DC Power Supply (Brick, Replacement for PWRS-14000-241R)
AC Input: 100-240V, 2.8A
DC Output: 12V, 9A, 108W
Requires: DC line cord and Country specific grounded AC line cord.

CBL-DC-381A1-01
DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW, Level VI replacement for PWRS-14000-241R

23844-00-00R
US AC line cord, 7.5 feet long, grounded, three wire for power supplies.

BRKT-SCRD-SMRK-01
Rack/Wall Mounting bracket for multi-slot cradles.

Charging LED indicators

Multi-Slot Cradle

RS6100/ RS5100 40-Slot Battery Charger

SAC-RS51-40SCHG-01: 40 slot spare battery charger, charges forty RS6100 / RS5100 batteries. LEDs on the cradle indicate charge status of each battery.

Requires: Power Supply PWR-BGA12V108W0WW, DC Line Cord CBL-DC-381A1-01 and Country Specific 3 wire AC Line Cord.

Additional accessories

PWR-BGA12V108W0WW
Level VI AC/DC Power Supply (Brick, Replacement for PWRS-14000-241R)
AC Input: 100-240V, 2.8A
DC Output: 12V, 9A, 108W
Requires: DC line cord and Country specific grounded AC line cord.

CBL-DC-381A1-01
DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW, Level VI replacement for PWRS-14000-241R

23844-00-00R
US AC line cord, 7.5 feet long, grounded, three wire for power supplies.

BRKT-SCRD-SMRK-01
Rack/Wall Mounting bracket for multi-slot cradles.

Charging LED indicators

Trigger Options

**Single Trigger

**

SG-RS51-TRGSS-02:

• Intended for use in aggressive environments in warehouse and manufacturing
• Long trigger lifecycle (2+ million presses).
• Remove and rotate for left and right hand mounting
• Can be worn over heavy work gloves

Additional accessories

SG-RS51-CMPD-05
RS5100 / RS6100 replacement comfort pads, to be used with single sided trigger (5-pack).

SG-RS51-STRPNY-10
RS5100 / RS6100 spare nylon finger straps single sided trigger (10-pack).

Trigger Options

Double Trigger

SG-RS51-TRGDS-01:

• Designed for use in less aggressive use cases in retail, warehouse and manufacturing.
• Ambidextrous, for right and left hand mounting without removal or rotation.
• Cannot be worn over heavy gloves
• Long trigger lifecycle (millions of presses)

Alternative Versions

SG-RS51-TRGDU-01
Double Sided trigger w/ USB-C Charge battery using a USB-C cable without the use of a charge cradle.

SG-RS51-TRGDV-01
Double Sided trigger w/ Vibration

Provides the user with haptic feedback while scanning.

Lanyard

SG-RS5X6-LNYD-01

• Single, large trigger button for handheld scanning, compatible with RS6100 and RS5100

Additional accessories

SG-RS51-RLYD1-01
Retractor with Magnetic Recoil, For Use with Lanyard Trigger, Includes Adjustable Cord for Wearing Around the Neck

• Allows lanyard to be worn around the neck or on the hip

Mount Options

Back of Hand Mount

SG-RS5X6-BHMT-01
Back of Hand mount for RS6100 and RS5100

SG-RS51-BHSTP-01
Spare Hand Strap

• Mount is NOT a glove. Can be worn without gloves or over standard, low-cost gloves.
• Durable materials which resist wear – only the strap is fabric.
• Long trigger lifecycle (millions of presses).
• One-size-fits-all and ambidextrous, so customers don’t need to buy right / left hand and small / medium / large versions.
• Allows swapping of spare batteries for back to back shifts.

Low Temperature Back of Hand Mount

SG-RS5X6-BHMTX-01
Low Temp Back of Hand mount

SG-RS5X6-BHSTX-01
Low Temp Spare Hand Strap

SG-RS5X6-BHFSS-10
Spare Finger Strap, Small, 10 pack

SG-RS5X6-BHFSM-10
Spare Finger Strap, Small, 10 pack

SG-RS5X6-BHFSX-10
Spare Finger Strap, Extra Large, 10 pack

• Mount is designed for use with RS6100 in freezer operations, down to -30oC / -22oF or for RS5100 in cooler operations, down to -20oC / -4oF
• Hand strap fits over heavy freezer gloves and mittens
• Mount ships with small size finger strap, intended for mounting trigger on index finger
• Spare straps: small (one finger), medium (two fingers), extra large (full hand/mitten)

Enterprise Hand Mount

• Small, medium and large sizes, in left and right hand, for a custom fit for every worker
• Mount is designed for use with RS6100 and RS5100
• Mount (SG-RS5X6-HNMT-01) and hand wrap (SG-WEAR-HNWPxx-01) sold separately.

SG-RS5X6-HNMT-01
RS6100 / RS5100 Enterprise Hand Mount

Documents / Resources

| RS6100 RS6100 Wearable Scanner [pdf] User Guide
RS5100, RS6100, RS6100 Wearable Scanner, RS6100, Wearable Scanner, Scanner
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>