OzSpy MDC-KP05 WIFI FM Alarm Clock Radio Camera User Manual

OzSpy MDC-KP05 WIFI FM Alarm Clock Radio Camera

Radio Clock Camera Operational Manual

Radio instructions

1. Connect to the power, touch the “POWER” button to turn the radio on, and tap again to turn off the radio.
2. Long press the “M” button to automatically search the channel and save the channel. Up to 20 radio channels can be stored.
3. After the automatic search is completed, touch the “M” button to play the saved channel continuously. At this time, touch the “TUNING” button to play the previous channel or the next channel.
4. When the radio is playing a certain channel, touch the “TUNING” button gently to adjust the frequency unit of the channel. Long press will automatically search and play a channel.

Bluetooth speaker instructions

1. Turn on the power and touch the “POWER” button, then touch the “BT/FM” button to select Bluetooth playback.
2. The “BT” icon flashes on the display, turns on the Bluetooth switch of the mobile phone or other electronic device, and searches for “KT-V100” to connect with the device. The “BT” icon will be always on when the connection is successful.
3. Tap the “M” button to play or pause the music.
4. The “VOL.+/-” button adjusts the volume, and TUNING can choose to play the previous or next track.

The clock and alarm settings

1. In the state of the clock display, (with the radio and Bluetooth speakers turned off), long press the “M” icon, and the “24H” on the screen will start to flash. Touch “-VOL/SET+” button to select 12H or 24H version; touch “M” again to set clock, alarm clock, and alarm clock sound types separately. Press “ENTER” to complete setting anytime.
2. After setting the alarm clock time, the alarm clock icon will be illuminated. When the alarm rings, touch any button except the “SNOOZE” to stop the alarm. Touch the “SNOOZE” button to pause for a few minutes and then ring again, repeat twice. Long press the “SNOOZE” button to turn off the alarm.
3. The battery at the bottom of the machine is for saving the clock, and radio channel information in case of AC power off.

Long press the “POWER” button to turn on/Off Camera (default is on)

Quality Assurance: 1-Year Warranty

Notice: Connect the power supply and the camera starts up automatically. then set up your camera by your phone or tablet device.

Quick Guide For APP Installation

For iOS Devices:

• Scan QR Code for the iOS operating system to download and install the “Yoosee” APP with iPhone or iPad devices.
• Search “Yoosee” in App Store with your iOS devices, and download and install the APP.
• Input www.yoosee.co on PC web browser for iOS or Android devices QR code, and download and install the APP.

For Android Devices

• Scan QR Code for the Android operating system to download and install the “Yoosee” APP with Mobile or tablet devices.
• Search “Yoosee” in Google Play with your iOS devices, and download and install the APP.
• Input www.yoosee.co on a PC web browser for iOS or Android devices QR code, and download and install APP.

Account Registration & Login:

• Click the “Yoosee” App and “Quick register” for an account for new users.
• Input mobile phone or email address for registration and set account password as APP prompt.
  •  Mobile phone number registration is available only in certain countries.
• Login with a registered account to start camera device pairing or viewing. Login is also available with a WeChat or Line account.

Adding New Camera Device:
Power the camera device and follow the prompts as an APP indication. If a beeping sound or voice prompt is not heard from the camera device, please press and hold the reset button for the camera device for 5 to 10 seconds to activate and reboot for device to factory default settings. (The Pan & Tilt IP Camera reset button is located at back bottom or base, Bullet or Dome models reset button is located at the cable end area)

Pairing Camera Device to Wi-Fi Router

• Connect mobile device to Wi-Fi router signal. (Ensure mobile is connected to 2.4Ghz Wifi signal as camera device does not support 5Ghz Wifi signal currently.)
• Start the “Yoosee” APP, click “+” icon on top right corner or center of the APP interface, Click “Add new device” and select “Fast Networking” (For camera device that supports AP connection) or Smartlink (For camera device that supports sound wave connection) to start pairing installation.
  • APP interface might vary from APP version or Devices Operating System.
  • For old-version camera devices or firmware, please use Smartlink to pair to a Wi-Fi router.
• Click “Hear a beep for connection” when beeping sound or sound prompt is heard from the camera device. Click “Connect the AP hotspot”for the next APP interface. Select the hotspot at the interface from our product’s corresponding hotspot (generally GW IPC XXXXXXX, “XXXXXXX” refers to camera device ID number) to connect and proceed to complete all steps as APP prompts to complete camera device pairing installation procedures.

Using Camera Device with AP Standalone Mode:

1. Press and hold the reset button for camera device for 5 to 10 seconds to activate rebooting for device to factory default settings.
2. Wait for 5 minutes after camera device is restored to factory default settings. Press and hold reset button till sound prompt is heard.
3. Go to network settings for mobile or tablets device and select GW_AP_XXXXX ( generally XXXXX refers to camera ID number).
4. Open “Yoosee” APP and select “skip,shift to AP mode”. Select “Confirm” and shift to AP Standalone mode for camera device.

Understanding Yoosee APP

Diagram 1:

• a. Camera device name. Click on the icon to change the device name.
• b. Add a new camera device to the APP.
• c. Camera status (Online or Offline).
• d. Arm (On Guard) or disarm ( Disable Alerts) for the camera device.
• e. Share camera devices with other users.
• f. Playback video clips for camera devices.
• g. Camera device settings and features.
• h. Camera main interface (display all added camera devices).
• i. Display all alarm alert messages.
• j. Snapshots of camera devices.
• k. APP account information and details.
• l. One key arm or disarm for all camera devices within the APP.
  • Available only for the new version camera model. Ensure the Firmware and APP version is upgraded to the latest version. If the feature is not available, please select the “My” icon on the right bottom of the app interface, click “General settings” and turn on “Quick set alert mode”. The feature is made available for 2 or more camera devices.

Diagram 2:

• m. Camera device settings & features.
• n. Display the number of users viewing the camera and connection bandwidth
• o. Set Preset View Position options. (Available for Pan & Tilt Models with Preset View option).
• p. View resolution option. LD (Lowest Resolution), SD (Standard), HD (High Resolution).
• q. Mute or disable the mute feature for camera device
• r. Video recording to mobile phone option.
• s. Voice intercom feature. (Single or Duplex defers to camera processing chipset).
• t. Click to capture a snapshot view of the camera device.
• u. Enlarge camera device view

Camera Device Settings & Features

• Camera device information.
• Set the time zone and time for the camera device.
• Adjust picture resolution and volume for the camera device.
• Recording settings for the camera device. (Micro SD Card is inserted and made available)
• Alarm settings for the camera device. (Receive Alarm prompt, Alarm Buzzer, Motion Detection & RF 433 MHz Sensors).
  • : Camera Arm and Disarm Time;
  • : Motion Detection On/Off and adjustment to Motion sensitivity control.
  • : Alarm notifications, alarm intervals, and alarm buzzer settings.
• RSTP settings and RSTP password option.
• Networking settings for the camera device. Switch to Wi-Fi or Ethernet option.
• Check camera device firmware updates
• Unbind devices (To switch camera device location or pair to new WiFi router).

Sharing Camera Device

Due to higher security for camera devices, Yoosee camera devices are made to recognize only one account. To add camera device to other users, camera can only be shared and managed via:

• Mobile number or email
• Sharing or QR code or link via social media ( WeChat or Line)
• Scanning of QR code.

CMS Client Software for PC (Windows Operated System)

Input www.yoosee.co on your computer browser. Select the CMS Client icon to download software for the PC (Windows Operated System). Log in with the below options:

• Admin login ( LAN environment with a blank password)
• Mobile number login (ensure the mobile number is registered with the account)
• Email or Yoosee account number ( Yoosee account number can be found in “Account Information” at the “My” icon.

CMS software will automatically search for available devices in LAN or the same WLAN network environment. A dialog box will pop up if any devices are found, click “Add all” devices and add them to the device list.

Add Camera Device Manually:
Click”+” on CMS left interface, select “Manual add device”, input the device name, device ID, and password and click OK to complete adding process.

Monitoring with CMS:
Open CMS software, right-click on Device List and select “all connect” option in the CMS menu or select an added device in Device List and right-click to start monitoring.

Related Parameters

Straight line 6 meters

Minimal Illumination| 1LUX
Compressed Format| H.264
Night Version| 4~6M
Consumption| 12V/1A
Storage Temperature| -20-80 degree centigrade
Operating Temperature| -10-60 degree centigrade
Operation Humidity| 15-85%RH
Memory Card Type| TF card
Player Software| Mainstream player
Computer Operating System| Windows/Mac OS X
Mobile Phone Operating System| Android/iOS
Web browser IE7 and above, chrome, Firefox Safari.etc

Frequently asked questions

1. The device indicated offline status on the APP device list Ensure the camera is connected to Wi-Fi and has access to the intranet. Please check if the Wi-Fi router has internet access and indicator light is functional.

2. When the APP of a mobile phone cannot receive an Alarm push notification. Ensure the Alarm (Motion Detection or Sensors are available) and Alarm Push notification is activated. Arm camera device at APP device main interface (icon indicates On Guard status. Check your mobile device if the notification is forbidden.

3. Motion Detection false alarm notification is high. Adjust the motion detection sensitivity option under Alarm settings. If the option is unavailable, please update the APP version and camera device Firmware.

4. Recording or video file is unavailable. .
   Ensure the Micro SD card is formatted to FAT32. Please also check if the Micro SD card is damaged.

   • Micro SD card capacity above 64GB, please use a C10 (Class 10) card.

5. The camera device cannot connect to WiFi.

   • Check if the Wi-Fi signal is 2.4Ghz bandwidth as the camera device does not support 5Ghz Network currently. Please ensure the Wifi password is correct and as the requested format as per APP indicated.
   • Ensure the Wi-Fi router does not limit Wi-Fi access such as AP isolation, limit the number of devices for internet use, anti-free loading, etc…
   • Some mobile phone version requires location services for Wifi list.

6. AP hotspot or Camera device ID is not indicated in the WiFi list.

   • Ensure camera device supports AP (Camera supporting sound wave Smartlink does not support AP hotspot or Fast Networking option.
   • The mobile phone and camera device is too far apart. Please shift the distance to 10 meters.

RSTP Password:
To further enhance safety for the camera devices ( iOS 4.3 & Android 34 version above), Please set the RSTP password as indicated in the app. You can switch off or set the RSTP option via APP if required. RSTP password is used for recording devices or software like NVR, CMS Client, and Onvif protocol purposes to enhance better security and privacy.

Regulatory Compliance Information:
The camera device complies with the rules of the CE, FCC, and Quality Management 14 Rules as well as PDCA (Plan, Do, Check, and Act). The equipment generates and can radiate radio-frequency or Wi-Fi energy. Please use and install equipment in strict accordance. The equipment has been tested and found to comply with CE & FCC rules. These specifications are designed to provide reasonable protection against such interference, however, there is no guarantee that interference will not occur.

References

• 深圳技威时代科技有限公司 - 有看头下载
• 深圳技威时代科技有限公司 - 有看头下载

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>