TELWIN 955064 Professional Battery Chargers User Manual

MULTIFUNCTION BATTERY CHARGER

LCD DISPLAY

LCD DISPLAY (page 2)

1. Battery charge level.

2. Choice of battery type:
   • GEL: Lead-Calcium (PbCa), solid electrolyte, gel, completely sealed battery. They are maintenancefree batteries.
   • AGM (ABSORBENT GLASS MAT): lead batteries with electrolyte absorbed in “breglass. Completely sealed. They are maintenance-free batteries.
   • AGM+: they ensure a higher number of start-ups at higher current and more in-depth discharge than standard AGM. Used on vehicles with Start-Stop system. Compact dimensions, greater resistance to vibrations and fast recharge times.
   • Lithium (Li): batteries with reduced weight, high energy density and very low auto-discharge. They are mainly used in the world of motorsport.
   • EFB (Enhanced Flooded Battery): liquid electrolyte batteries with a higher recharge capacity and which support a higher quantity of cycles (start-ups) than traditional ones. Ideal for vehicles with Start-Stop system.
   If no type of battery is selected, the battery charger automatically sets the type of battery.

3. Charges at low temperatures.

4. Battery voltage set.

5. RECOVERY mode.

6. Generic alarm for polarity reversal, short circuit, worn or faulty battery.

7. SUPPLY mode.

8. PULSE-TRONIC charge phases.

9. BOOST mode.

10. TEST mode.

11. Alternator test and Starting Load E#ciency test (CCA).

12. Outcome of TEST, RECOVERY and charge end.

13. FUNCTION – Setting button:
    – PULSE-TRONIC CHARGE (GEL, AGM, AGM +, Li, EFB and low temperatures ****).
    – TEST (battery status, battery starting load e#ciency, vehicle alternator).
    – Advanced Programs: BOOST, RECOVERY, SUPPLY.

14. VOLT – Setting button:
    – 12/24V battery voltage.

FUNCTIONS

A. PULSE-TRONIC CHARGE
B. TEST
– CHARGE STATUS TEST
– BATTERY CRANKING EFFICIENCY TEST (CCA)
– ALTERNATOR TEST
C. BATTERY MAINTENANCE
– RECOVERY
D. POWER SUPPLY
– SUPPLY
OPTIONAL
INFO ALARM

CHARGER CABLES CONNECTION

LOAD/MAINTENANCE

PULSE-TRONIC TECHNOLOGY

1. VOLTAGE SELECTION

2. Pulse-Tronic PROCESS SELECTIONIf no type of battery is selected, the battery charger automatically sets the type of battery.

3. OPTIONAL: ADVANCED MENU SELECTIONOptional for faster charging

4. CLAMPS CONNECTION

5. PULSE-TRONIC GRAPHIC1 Battery test
   2 Sulphated/very discharged battery pulse recovery
   3 Integrity check
   4 Charge up to 80%
   5 Charge up to 100%
   6 Charge endurance monitoring
   7 Charge holding ()
   8 Pulsed charge recovery ()
   (*) Maintenance phases after charging has ended.
   They are interrupted only on disconnecting the battery charger.

6. CHARGE END – EXAMPLEPulse-Tronic charge end – Positive resultPulse-Tronic charge end – Negative result

TEST

CHARGE STATUS

1. VOLTAGE SELECTION
2. TEST SELECTION
3. CLAMPS CONNECTION
4. TEST END – EXAMPLE

BATTERYY STARTING LOAD EFFICIENCY

1. VOLTAGE SELECTION
2. TEST SELECTION
3. CLAMPS CONNECTION
4. TEST END – EXAMPLE
5. TEST END – EXAMPLE

ALTERNATOR

1. VOLTAGE SELECTION
2. TEST SELECTION
3. CLAMPS CONNECTION
4. VEHICLE START
5. TEST END – EXAMPLE

MAINTENANCE

RECOVERY

1. VOLTAGE SELECTION
2. ADVANCED MENU SELECTION
3. CLAMPS CONNECTIONWith symbols !ashing in succession, the RECOVERY process in progress is indicated.
4. PROCESS END – EXAMPLE
5. EXIT FUNCTION

POWER SUPPLY

SUPPLY

1. VOLTAGE SELECTION
2. ADVANCED MENU SELECTION
3. CLAMPS CONNECTION TO VEHICLE BATTERY CABLES
4. VEHICLE POWERED
5. EXIT FUNCTION

OPTIONAL
SUPPORT BRACKET MAGNETIC KIT

Documents / Resources

| TELWIN 955064 Professional Battery Chargers [pdf] User Manual
955064 Professional Battery Chargers, 955064, Professional Battery Chargers, Battery Chargers, Chargers
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>