AURA GC2 Elite Mid Tower PC Case Installation Guide
- June 13, 2024
- Aura
Table of Contents
GC2 Elite Mid Tower PC Case
Installation Guide
GC2 Elite Mid Tower PC Case
AURA GCELITE
Mid-Tower pc Case
SPECIFICATIONS
| Product Name | AURA GC2 Elite |
|---|---|
| Case Type | MID Tower |
| Dimension (L x W x HJ | 3395 x 195 x 450mm 15.5 x 7.7 x 17.8 inch |
| Chassis Dimension (L x W x | 3350 x 195 x 435 mm 133.8 x 7.7 x 17.1inch |
| Motherboard Support | mini-lt, micro TX, A TX |
| Expansion Slots | 7 |
| Material | SPCC, ABS, Tempered Glass |
| Window | Left |
| Radiator Support | Front:360 mm |
ear:120 mm
Fan Support| Top: 2 x 120mm
Front: a3 x 120mm ,2 x 140mm
ear: 1x 120mm
Pre-installed Fans| Front: a3 x 120mm Fixed RGB Fans
ear: 1x 120mm Fixed RGB Fan
Pre-installed Control BOX| No
Motherboard Sync| No
Drive Bays| 2×3.5″ or 1x 2.5’+1x 33.5″(HDD Cage)
2 x2.5°
Clearance| CPU cooler height limitation: 160mm
VGA length limitation: 3440mm
PSU length limitation: 160mm
I/O Port| LB 3.0 X1, USE 2.0 X2,
HD Audio x1
EXPLODED VIEW & PARTS
PARTS
| 1 | Chassis Body |
|---|---|
| 2 | Tempered Glass Side Pane & Screw |
| 3 | Right Side Panel |
| 4 | Top Dust Filters |
| 5 | Mesh Front Panel |
| 6 | ID Port |
| 7 | 1220MIM AGE FAIN |
| 8 | Rubber Foot |
ACCESSORY
| FIGURE | PARTS NAME | QUY | USED FOR |
|---|---|---|---|
| Stand-off .75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x6mm | 4 | PSU | |
| Screw #6 x5mm | 8 | HOD | |
| Screw M3 5mm | 25 | 2.5″ HDD/Motherboard/0DD | |
| Cable Tie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis
Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ & 2.5″ HDD INSTALLATION
A. 3.5″ HOD
Align the HOD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
Top 2 x 120mm
Front 3 x 120mm or 2 x 140mm
Rear 1 x 120mm
RADIATOR COMPATIBILITY
Front 360 mm
Rear 120 mm
1/0 PORTS
| 1 | Power Button |
|---|---|
| 2 | USB 2.0 |
| 3 | Headphone |
| 4 | Mic |
| 5 | USE 2.0 |
| 6 | USB 33.0 |
Sync With Motherboard : Press and Hold the Fan LED Control Button for 3 Seconds.
1/0 CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.