SW-MOTECH BC.HTA.08.740.11501/B Saddlebag Set Installation Guide

ANBAUANLEITUNG
mounting instructions
BC.HTA.08.740.11501/B
content
BC.HTA.00.740.11001/B

BC.HTA.08.740.11501/B Saddlebag Set

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required le.g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work! Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behavior and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country: specific regulations concerning vehicle registration/operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that all items on the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer’s specifications or replaced by parts delivered by SW- MOTECH. Secure all threads, unless otherwise specified, with a medium-strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation makes sure that all parts and connections previously removed are properly replaced. Also, make sure that no moving parts are obstructed and that no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.

PRODUCT SPECIFIC INFORMATION

ATTENTION:
Pay attention to the mounting instructions included in the panniers!

* All measurements in millimeters. ** The second number indicates the total quantity of the part in the delivery.
*** No torque specifications: Use the torque defined by the vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer’s specifications.

Irrttimer und Anderungen vorbehalten. Technische und Design-Anderungen vorbehalten. Errors and omissions excepted. Technical and design modifications are subject to change.

MOUNTING

Attach the connector holders (2) to the mounting brackets (1), as shown in the drawing (left side mounting bracket shown).
ATTENTION: Tighten the screws as specified in the parts list! Over- tightening the screws will damage the plastic parts!

Attach the support arms (6) to the connectors (71, as shown in the drawing.
ATTENTION: Connect the “U’ connector (7) to the “L” support arm (6); Then connect the components marked with “R”! Also make sure the engraving of the support arms 161 is located as shown in the detail drawing!
ATTENTION: Tighten the screws as specified in the parts list! Over- tightening the screws will damage the plastic parts!
ATTENTION: Make sure the support arms (6) fit properly after tightening the screws 191!
Irrtiimer und Anderungen vorbehaften. Technische und Oesign-Anderungen vorbehalten. Errors and omissions excepted. Technical and design modifications are subject to change.

Remove the buckles from your panniers. Then attach the buckles to the fastening lugs (11), as shown in the detailed drawing. Tighten the screws as specified in the parts list. Attach the mounting brackets (11 and fastening lugs (1 1) with the passenger footrest mounts to the vehicle, as shown in the drawing.
ATTENTION: Use a liquid thread locker! Tighten the screws as specified in the parts list. Attach the exhaust with the original parts (Orig.) and the spacer (19) to the passenger footrest mount on the right side. Tighten the original screw (Orig.) with the manufacturer’s specified torque.

Insert the connectors (7) of the support arms into the connector holders (2) on both sides of the vehicle, as shown in the drawing.
ATTENTION: Pay attention to the audible clicking sound! Before riding check the proper fit of the support arms.
ATTENTION: Before mounting the panniers to the support arms, pay attention to the mounting instructions included in the panniers!
Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required le. g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop!
SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work! Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behavior and/or stability of your vehicle.
GENERAL INFORMATION Observe the country-specific regulations concerning vehicle registration/operation as well as TOy regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION : Read the mounting instructions carefully and make sure that all items on the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
FUNCTION CHECK: After fixation also makes sure that no moving parts are obstructed and the function of the vehicle is not hindered in any way. Lamps as taillights and turn signals must not be limited in their function. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. Before riding and at each stop (every 200 km) check the proper fixation of the product!
ATTENTION: All components of the product must not contact any hot or moving parts of the vehicle. All parts should also remain 5 cm away from hot parts of the vehicle and remain clear of the exhaust stream. For this reason, compress the suspension fully several times with your vehicle stationary.
LOADING INFORMATION ATTENTION: Modifications will void any warranty.
ATTENTION: Riding with this product may affect motorcycle driving and braking performance! Make sure the weight is evenly distributed! This product must be used in pairs!
ATTENTION: Cornering and ground clearance can be reduced by using this product!
ATTENTION: Maximum load per side / pannier: 5 kg / 11 lbs! The maximum vehicle load specified by the manufacturer must not be exceeded!
ATTENTION: Maximum speed with this product: 130 km/h!
ATTENTION IS NOT FOR OFFROAD USE!

After mounting the pannier frames you need to protect the surface of the motorcycle against scratches with the included protection foil la Clean the surface from grease and dirt before applying the protection film.
ATTENTION: Sharp edges have to be covered with several layers of protection foil! After mounting the bags, check if the affected parts of the vehicle are sufficiently protected against abrasion.

Slide each pannier sleeve of the panniers (3) onto the corresponding pannier frame, one at a time.
Fasten the panniers (3) with the Velcro flaps over the rear (passenger seat( of the motorcycle, as shown in the drawing.
ATTENTION: Make sure after loading the panniers (3) there is NO weight on the pannier frames! The weight of the panniers (3) must be supported by the Velcro flaps, NEVER by the pannier frames. After loading, the pannier frames must be positioned in the pannier sleeves, as shown in the detailed drawing!
ATTENTION: All parts of the panniers (3), including straps, must not contact any hot or moving parts of the vehicle! All parts should also remain 5 cm away from the exhaust and remain clear of the exhaust stream!

Fix the panniers 13) with the safety straps on the loosely mounted buckles 11). Then tighten the screws of the buckles (1). Tighten the safety straps to secure the panniers (31. ATTENTION: Make sure BEFORE each ride that the Velcro flaps and safety straps of the panniers 13) are firmly tightened and there is NO weight on the panniers frames! Wrong-mounted panniers (3) can damage the product and vehicle! Finally, roll up the excess strap length and secure it with the attached Velcro strap, to avoid flapping.
CARE : Clean the product periodically or after each trip, as dust and dirt have a wear effect and permanent stains can be prevented. Clean the product after riding in salty conditions, to avoid damage from salt. First, remove dust and encrustations with a soft dry brush. Remove stubborn deposits with a soft cloth and warm soapy water. Do NOT use strong cleaning agents, rough cleaning tools or a high-pressure washer! Then rinse with clear water. Before re-use dry the product for at least 24 hours in the air (not in direct sunlight).
ATTENTION: Surface materials can experience color changes or fading when exposed to direct sunlight for extended periods of time and by environmental factors SMOG, acid rain, etc.)! SW-MOTECH assumes no liability for this.
ATTENTION: Dirt on the product and vehicle has an abrasive effect and can damage surfaces, such as the paint. Make sure that all areas of the vehicle, which have contact with the product or parts of the product as straps, are protected with an adhesive protection film from scratches and abrasions. SW- MOTECH assumes no liability for paint damage and abrasions.
Packed by:
Date of packaging:
Copyright by SW-MOTECH GmbH & Co. KG
Technische und Design-Anderungen vorbehalten. Errors and omissions excepted. Technical and design modifications are subject to change.

SW-MOTECH GmbH & Co. KG
Ernteweg 8/10 35282 Rauschenberg
Germany
Tel. / phone + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (016425 / 8168 – 10
inforasw-motech.com
www.sw-motech.com

Documents / Resources

| SW- MOTECH BC.HTA.08.740.11501/B Saddlebag Set [pdf] Installation Guide
BC.HTA.08.740.11501, BC.HTA.08.740.11501B, Saddlebag Set, Saddlebag, HTA.08.740.81500, HTA.08.740.81500B, BC.HTA.00.740.11001, BC.HTA.00.740.11001B
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>