Kinderkraft ASKOY Pushchair User Manual

Kinderkraft ASKOY Pushchair

Product Information

• Model: ASKOY
• Product: Kinderkraft Buggy
• Rev: 1.1

Product Usage Instructions

1. Assembly:
2. Elements of the Buggy (see Fig. 1):

  * A. Frame with seat and safety belts
  * F. Cup holder
  * G. Rain cover
  * E. Rear axle with brake
  * 1\. Cotter pin x2
  * 2\. Spring pin x2
  * 3\. Cover x2
1. The frame should be placed on a flat surface with the handle facing up (see Fig. 2).
2. To unfold the frame, slide lock A on the right side of the buggy and lift it up.
3. A properly unfolded frame is shown in Fig. 3. Unfolding the Buggy:  

WARNING! Before using the buggy, make sure all locking devices are engaged.

2. Safety and Care:
   • Never leave the child unattended.
   • Ensure that all locking devices are engaged before use.
   • Avoid injury by keeping the child away when unfolding and folding the product.
   • Do not let the child play with the product.
   • Always use the restraint system.
3. Cleaning and Maintenance:
   • Do not wash. Wipe the product with a damp cloth and mild cleaning detergent.
   • Do not use bleach.
   • Do not tumble dry.
   • Do not dry clean.

The illustrations are for illustration only and do not represent the product.

Dear Customers,
Thank you for purchasing a Kinderkraft product. Our products have been designed for your child’s safety and comfort. The buggy is an ideal solution for those who value quality, modernity, and functionality. Please read the manual carefully and follow its recommendations.

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

Safety and care notes

WARNING!

• Never leave the child unattended
• Ensure that all the locking devices are engaged before use
• To avoid injury ensure that the child is kept away when unfolding and folding this product
• Do not let the child play with this product
• Always use the restraint system
• Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use

This product is not suitable for running or skating

• Age and weight usage: from 0 months up to 22 kg or up to 4 years, whichever comes first.
• We recommend using the lowest reclined position for newborn babies.
• This product may only be used by one child at the same time
• The parking device shall be engaged when placing and removing the children
• The maximum basket load is 2 kg.
• The maximum weight of a bag attached to the adjustable handle is 1 kg.
• The maximum load carried in the cup holder must never exceed 0,5 kg
• Any additional load suspended from the buggy handles, backrest, and sides will cause stability loss.
• Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
• Lift the front suspension when going up a curb or step.
• Do not place the product near open flame or other heat sources.
• Do not use with an additional platform.

ASSEMBLY

BUGGY COMPONENTS (FIG. 1)

• A. Frame with seat and safety straps

• B. Front wheels

• C. Rear wheels

• D. Safety bar

• E. Rear axle with brake / Set of wheel

• F. Cup holder

• G. Rain cover
  fasteners

  1. Pin x2
  2. Cotter pin x2
  3. Plug x2

UNFOLDING BUGGY FRAME Place the frame on a flat surface with its handle up (FIG. 2). In order to unfold the frame, move the lock (A) on the right side of the buggy and lift the frame up until you hear the locking sound.
A properly unfolded frame is shown in FIG. 3.

WHEEL ASSEMBLY/DISASSEMBLY Put the rear wheel on the protruding part of the rear axle (FIG. 4). Clip in the metal pin (E1) onto the axis, insert the cotter pin (E2), and at the end, cover with the plug (E3). Each of the elements should be pressed with a slight resistance until it locks into place. Repeat these steps on the other side of the buggy. To mount the rear axle with the brake, put the rear free tips of the frame in the slots in the rear axle until you hear the lock click (FIG. 5). Make sure to properly protect them with snap fasteners.
Insert the front wheels in the front axles until you hear the locking sound (FIG. 6). To remove the front wheels, push the quick-release button located below the footrest under each wheel (FIG. A). The buggy has a system of swivel front wheels which can be locked in the straight-ahead position. To lock the wheel to move forward, slide the ring located above the wheel (FIG. B).

NOTE! Before using the buggy, make sure that all the wheels are properly installed.

ASSEMBLY / DISASSEMBLY OF THE SAFETY BAR / RAIN COVER
The safety bar must be inserted in appropriate slots on both sides of the frame, as shown in Figure 7. To remove the part, press the release buttons on both sides and remove the safety bar (FIG. 8). Place the rain cover (G) over the seat and secure it with Velcro tabs.

USE OF BRAKE The buggy is equipped with a foot brake located on the rear axle. Press the lower part of the brake down; the brake is activated when you hear the locking sound (FIG. 9). Unlocking occurs after lifting the lower part of the brake lever.

BACK AND FOOTREST ADJUSTMENT AND CUP HOLDER ASSEMBLY (FIG. 10)

• The footrest has 4 positions. Hold down the buttons on both sides (FIG. A), to change the position of the footrest.
• The seat is equipped with a smooth backrest adjustment system, from a lying to a sitting position, using a clasp (FIG. B). The cup holder is mounted on the left side of the buggy on the stem fixed to the frame (FIG. 11).

SAFETY STRAPS (FIG. 12)
The buggy’s straps are adapted in such a way as to enable its use even by newborns. Always use the fastening system. To secure the child, connect the fasteners of hip and shoulder straps (FIG. A) and then insert them into the middle buckle until it engages (FIG. B). Adjust the straps each time.

FOLDING THE BUGGY When folding the buggy, lower the backrest as far as possible. To fold the frame, press the lock button (Fig. 13.I) located on the handle simultaneously pressing the folding button ( Fig.13.II) and push the handle down (Fig. 14).

CARE AND MAINTENANCE

The buyer is responsible for the proper installation of all functional elements as well as for carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition. The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child’s safety and prevent the shortening of the product’s life have been presented below:

• Check the strength and safety of all rivets and connections.
• Check all wheel locking equipment and tires. If necessary, replace or repair.
• Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time.

If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease-based products as they attract dirt, which makes buggy movement difficult.

CLEANING

Explanation of symbols:

If the elements of the buggy chassis have been exposed to saltwater, rinse with tap water as soon as possible.
Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mold growth.

Warranty

1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product is handed over to the Buyer.

2. The warranty is only valid in the member states of the European Union, excluding overseas territories and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories.

3. The manufacturer’s warranty does not apply to countries not listed above. The conditions of the additional warranty may be determined by the Seller.

4. In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years). The complete terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM

5. Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM

6. The warranty does not cover:

   • A. Cosmetic damage, including but not limited to scratches, dents, and cracks in plastic, unless the failure is due to a material or manufacturing defect;
   • B. Damage resulting from misuse or poor maintenance – including but not limited to mechanical damage to products caused by misuse or poor maintenance. Refer to the instructions for use and installation of the product contained in the user manual;
   • C. Damage caused by improper assembly, installation or disassembly of products and/or accessories. Refer to the instructions for the use and installation of the product contained in the user manual;
   • D. Damage caused by corrosion, mold or rust, resulting from improper maintenance, care, and storage;
   • E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time. This includes: tears or punctures in inner tubes; tire damage; tire tread damage; fading of fabrics resulting from mechanical use (e.g. on joints and covering of moving parts);
   • F. Damage or erosion caused by the sun, perspiration, detergents, storage conditions or frequent washing, etc;
   • G. Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
   • H. Products that have been modified to change functionality without 4Kraft’s written consent;
   • I. Products from which the serial number or lot number has been removed or tampered with in any way;
   • J. Damage caused by the use of third-party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;
   • K. Damage caused by transport or by ground handling service providers.

7. The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults described above.

8. These warranty conditions are complementary to the Customer’s statutory rights with respect to 4KRAFT sp. z o.o. The warranty does not exclude, limit or suspend the Customer’s rights under warranty for defects in goods sold.

9. The full text of the Terms and Conditions of the Warranty is available on the website WWW.KINDERKRAFT.COM

In the interests Of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!
International : support@kinderkraft.com (0048) 61 646 02 37kinderkraft.com

References

• RMA
• RMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>